Log entry time 04:03:49 on January 6, 2003

Entry number 90529

Beginning-of-run EPICS data for Run Number 1068 at Mon Jan 6 04:03:23 EST 2003
; RIGHT SPECTROMETER  on adaql2 computer on a-onl account.
; Prescale factors (integer), downloaded each run at prestart.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; The default factor is essentially infinite. 
; ps8 = 65535 turns off the 1 kHz pulser on T8.
; Keep enough T2 to measure efficiency
; PS1 for the Right spectrometer T1 defined by S1.and.S2
; PS2 for the Right spectrometer T2 defined by Cerenkov/S1/S2 majority
; PS8 for 1024 Hz pulser (keep this at <= 100)
; Trig 9 = 30 Hz, and you cannot prescale it.
 
ps1=1,ps2=1,ps3=5000,ps4=5000,ps5=1,ps6=65535,ps7=65535,ps8=65535

 
Right Arm Q1 power supply current :
Right Arm Q1 momentum : 1.05601
Right Arm Q1 gauss meter : -0.019762
Right Arm Q1 power supply polarity :
Right Arm Q2 power supply current : 454.36
Right Arm Q2 momentum : 1.05578
Right Arm Q2 gauss meter : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 0.2388
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 363.095
Right Arm D1 momentum : 1.05601
Right Arm D1 NMR : 0.391872
Right Arm Q3 power supply current : 420.409
Right Arm Q3 momentum : 1.05655
Right Arm Q3 gauss meter : 0.18827
Right Arm Q3 power supply polarity : disabled
Right Arm Top VDC Current :
Right Arm Bottom VDC Current :
Right Arm Top VDC voltage : 3.99414
Right Arm Bottom VDC voltage : 4.00928
Average current of the two cavities : 4.91829
Current on Unser monitor : -10.5016
Current on Upstream bcm : 4.93486
Current on Downstream bcm : 4.90172
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78
Current on IBC0L02 (source) : 4.98313
Tiefenbach Hall A energy : 5008.97
Tiefenbach Hall C energy : 3028.2
Delta(E)/E width (MV_AI_DXWID) : 6.15864
MBSY1c Hall A Beam energy : 1046.86
MBSY3c Hall C Beam energy : 3036.3
MBSY1c magnet current (amp) : 43.3083
MBSY1c Bdl : 261245
Arc1 dp/p : 0
Arc2 dp/p : 0
Right Arm Arm Collimator : 0.862988
Right LVDT HPM : 3217
Right LVDT VPM : 3863
HacR_HPE1313A:0_Ch58 : -0.526367
HacR_HPE1313A:0_Ch55 : 22.168
HacR_HPE1313A:0_Ch54 : -0.852539
HacR_alignROLL : 0
HacR_alignPITCH : 0
HacR_alignHPT : 0
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0
IPM1C12.XPOS : -1.23062
IPM1C12.YPOS : 0.0492475
IPM1H04A.XPOS : 0.0202397
IPM1H04A.YPOS : -0.119646 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
IPM1H04B.XPOS : 0.0175282
IPM1H04B.YPOS : -0.220586
Survey X offset bpmA : 0
Survey Y offset bpmA : 0
Survey X offset bpmB : 0
Survey Y offset bpmB : 0
Wien angle : 10.1958
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : 237.18
Wien field : 6.684
Laser attenuation Hall A : 170
Laser power Hall A : 65
Half-wave plate (off=out) : OUT
Beam Half-wave plate (off=out) : OUT
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern : Quartet
Target OTR x-position : -0.736997
Target OTR y-position : -2.23144
Target OTR x-width : 2.78754
Target OTR y-width : 2.39635
Target OTR data valid flag : No
Target OTR In/Out : OTR is Out
Arc OTR x-position : -2.06356
Arc OTR y-position : -0.136763
Arc OTR x-width : 2.96598
Arc OTR y-width : 3.03807
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out
FPP HV 8.1.13 of chamber 4 : 23.5