• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT

    User name Keppel

    Log entry time 00:01:16 on February10,2003

    Entry number 95740

    keyword=Shift Summary

    Shift started running kinematics 3.6.5, run 20887/1887
    16:40 Stopped 20887 to check accumulated counts, started 20888/1888
    16:50 Had enough counts, so stopped 20888/1889, changed to Carbon target,
    raster off (run window labeled as raster on but correct as off on sheet)
    17:09 Ran run 20889/1889 Carbon, raster off, then asked for raster back on
    Did some HAPPEX tests while Carbon running
    17:20 Moved He target back, took NMR measurement (36.1% polarization)
    17:29 Started kinematics 3.6.3, run 20891/1891
    17:35 Beam tripped off for ~10 minutes mid run, MCC called with RF problems
    18:03 Started new run 20892/1892, same kinematics
    18:42 Stopped run, asked for beam 1/2 wave plate out (and checked)
    18:53 Started kinematics 3.6.4, 0 degrees, 20893/1893
    The Right Arm Bottom HV caused an intermittent software alarm, but there's apparently nothing wrong as it clears itself
    19:54 Ended 3.6.4 at 0 degrees, changed target to 180 degrees
    Had problems moving the target half wave plate, finally had to make access to move
    it manually
    21:47 Start kinematics 3.6.4, 180 degrees, 20894/1894
    ROC 14 crash, stopped runs to reset
    22:26 Started run 20895/1895
    23:00 Ended runs, requested beam 1/2 wave plate in
    23:04 Kinematics 3.6.3, 180 degrees, started with 20896/1896
    2340 Started 20897/1897 at same kinematics (just to do 2 runs)
    Finished the shift still running...