Log entry time 03:27:59 on February 14, 2003

Entry number 96460

Beginning-of-run EPICS data for Run Number 1994 at Fri Feb 14 03:27:43 EST 2003
; RIGHT SPECTROMETER  on adaql2 computer on a-onl account.
; Prescale factors (integer), downloaded each run at prestart.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; The default factor is essentially infinite. 
; ps8 = 65535 turns off the 1 kHz pulser on T8.
; Keep enough T2 to measure efficiency
; PS1 for the Right spectrometer T1 defined by S1.and.S2
; PS2 for the Right spectrometer T2 defined by Cerenkov/S1/S2 majority
; PS8 for 1024 Hz pulser (keep this at <= 100)
; Trig 9 = 30 Hz, and you cannot prescale it.
 
ps1=1,ps2=1,ps3=9999,ps4=9999,ps5=65535,ps6=65535,ps7=65535,ps8=65535
                                                         
 
Right Arm Q1 power supply current :
Right Arm Q1 momentum : 2.379
Right Arm Q1 gauss meter : -0.04424
Right Arm Q1 power supply polarity :
Right Arm Q2 power supply current : 1023.99
Right Arm Q2 momentum : 2.37934
Right Arm Q2 gauss meter : 0.5379
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 836.221
Right Arm D1 momentum : 2.379
Right Arm D1 NMR : 0.882817
Right Arm Q3 power supply current : 946.726
Right Arm Q3 momentum : 2.37925
Right Arm Q3 gauss meter : 0.4247
Right Arm Q3 power supply polarity : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. disabled
Right Arm Top VDC Current :
Right Arm Bottom VDC Current :
Right Arm Top VDC voltage : 3.99268
Right Arm Bottom VDC voltage : 4.01025
Average current of the two cavities : 0.52025
Current on Unser monitor : -15.1028
Current on Upstream bcm : 0.518295
Current on Downstream bcm : 0.522204
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) : 0.320978
Tiefenbach Hall A energy : 5008.63
Tiefenbach Hall C energy : 3028.39
Delta(E)/E width (MV_AI_DXWID) : 7.8886
MBSY1c Hall A Beam energy : 5019.53
MBSY3c Hall C Beam energy : 3036.3
MBSY1c magnet current (amp) : 209.525
MBSY1c Bdl : 1.25263e+06
Arc1 dp/p : 0.000189574
Arc2 dp/p : 0.000379085
Right Arm Arm Collimator : 0.863086
Right LVDT HPM : 3213
Right LVDT VPM : 3869
HacR_HPE1313A:0_Ch58 : -0.544434
HacR_HPE1313A:0_Ch55 : 21.7285
HacR_HPE1313A:0_Ch54 : -0.88623
HacR_alignROLL : 0.466989
HacR_alignPITCH : -0.489172
HacR_alignHPT : -0
Right Arm Angle Floor Angle : 47.5
Right Arm Angle Vernier : -7
Right Arm Scattering Angle : 47.6567
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 1.01174
IPM1H04A.YPOS : 0.0361836
IPM1H04B.XPOS : 1.06066
IPM1H04B.YPOS : 0.101575
Survey X offset bpmA : 0
Survey Y offset bpmA : 0
Survey X offset bpmB : 0
Survey Y offset bpmB : 0
Wien angle : -9.19573
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : -218.398
Wien field : 6.0156
Laser attenuation Hall A : 150
Laser power Hall A : 69
Half-wave plate (off=out) : IN
rotating waveplate : 6250
Beam Half-wave plate (off=out) : IN
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern : Quartet
Target OTR x-position : 1.25736
Target OTR y-position : 1.76017
Target OTR x-width : 1.35967
Target OTR y-width : 0.98548
Target OTR data valid flag : No
Target OTR In/Out : Current is Low
Arc OTR x-position : -2.17298
Arc OTR y-position : 1.3132
Arc OTR x-width : 3.06339
Arc OTR y-width : 1.29126
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out