NEXT
User name a-onl
Log entry time 02:25:25 on April 27, 2003
Entry number 98721
keyword=End_of_Run_1301
****************************
Run Number: 1301
End of Run Comment:
Run_type=other,beam_energy=1.148,beam_halfwaveplate=out,beam_raster=off,comment_text=beam 2 uA. empty target, beam 2 mm down in Y,daq_mode=both HRS daq,kin_name=,leftarm_p=1.067,leftarm_theta=18,rightarm_p=1.1473,rightarm_theta=12.502,target_halfwaveplate=out,target_name=Proteus,target_polarization=0,target_type=Empty
PRESCALE FACTORS:ps1=10 ps2=20 ps3=9999 ps4=9999 ps5=65535 ps6=65535 ps7=65535 ps8=65535
EVENTS[0]: 110335 [+]: 52809 [-]: 52860
TIME [0]: 2.056 mins [+]: 1.013 mins [-]: 1.013 mins
LIVE [0]: 99.70% [+]: 100.31% [-]: 100.19%
TRIGGER RATES: PRES/REAL
T1[0] :864.0/8639.7 Hz T2[0] : 2.9/58.6 Hz T8[0] : 0.0/1024.0 Hz
T1[+] :863.3/8632.6 Hz T2[+] : 2.9/58.0 Hz T8[+] : 0.0/1024.0 Hz
T1[-] :865.0/8649.9 Hz T2[-] : 3.0/59.3 Hz T8[-] : 0.0/1024.0 Hz
TRIGGER TOTALS: PRES/REAL
T1[0] : 106604/1066046 T2[0] : 361/7228 T8[0] : 1/126351
T1[+] : 52470/524701 T2[+] : 176/3524 T8[+] : 0/62240
T1[-] : 52579/525791 T2[-] : 180/3603 T8[-] : 0/62245
AVERAGE CURRENT
BCM x1 : 2.0797 uA BCM x3 : 2.3120 uA BCM x10: 2.0011 uA
APPROXIMATE CURRENT ASYMMETRIES
BCM u1 : -1508 ppm BCM u3 : -1385 ppm BCM u10: -1384 ppm
BCM d1 : -1426 ppm BCM d3 : -1371 ppm BCM d10: -1377 ppm
APPROXIMATE BCM CHARGES (C)
BCM u1 [0]:0.000266 BCM u3 [0]:0.0002492 BCM u10[0]:0.0002484
BCM u1 [+]:0.0001305 BCM u3 [+]:0.0001226 BCM u10[+]:0.0001222
BCM u1 [-]:0.0001309 BCM u3 [-]:0.0001229 BCM u10[-]:0.0001225
BCM d1 [0]:0.0002473 BCM d3 [0]:0.0003214 BCM d10[0]:0.0002454
BCM d1 [+]:0.0001216 BCM d3 [+]:0.0001583 BCM d10[+]:0.0001207
BCM d1 [-]:0.000122 BCM d3 [-]:0.0001587 BCM d10[-]:0.0001211
****************************
End-of-run EPICS data for Run Number 1301 at Sun Apr 27 02:14:43 EDT 2003
Left Arm D1 momentum : 1.12551
Left Arm arm angle : 18.0002
Right Arm D1 momentum : 1.1473
Right Arm arm angle : 12.5016
Tiefenbach Hall A energy : 1148.79
Left Arm arm mispointing (HPT) :
Right Arm arm mispointing (HPT) : -0
Left Arm Top VDC Current :
Left Arm Bottom VDC Current : -1.07422
Right Arm Top VDC Current :
Right Arm Bottom VDC Current :
Right septum set current : 98.61
Right septum current readback : 232
Left Arm Q1 power supply current :
Left Arm Q1 momentum : 1.12552
Left Arm Q1 gauss meter :
Left Arm Q1 power supply polarity :
Left Arm Q2 power supply current : 484.609
Left Arm Q2 momentum : 1.12543
Left Arm Q2 gauss meter :
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 376.44
Left Arm D1 momentum : 1.1255
Left Arm D1 NMR : 0.416668
Left Arm Q3 power supply current : 448.24
Left Arm Q3 momentum : 1.1259
Left Arm Q3 gauss meter :
Left Arm Q3 power supply polarity : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. disabled
Right Arm Q1 power supply current :
Right Arm Q1 momentum : 1.1473
Right Arm Q1 gauss meter : -0.01726
Right Arm Q1 power supply polarity :
Right Arm Q2 power supply current : 497.819
Right Arm Q2 momentum : 1.1471
Right Arm Q2 gauss meter : 0.2616
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 393.622
Right Arm D1 momentum : 1.1473
Right Arm D1 NMR : 0.425749
Right Arm Q3 power supply current : 537.261
Right Arm Q3 momentum : 1.14728
Right Arm Q3 gauss meter : 0.24075
Right Arm Q3 power supply polarity : disabled
Average current of the two cavities : 0.0157305
Current on Unser monitor : -14.3381
Current on Upstream bcm : 0.0166806
Current on Downstream bcm : 0.0148544
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) : 0.00143715
MBSY1c Hall A Beam energy : 1150.19
MBSY1c magnet current (amp) : 47.6444
MBSY1c Bdl : 287032
MBSY3c Hall C Beam energy : 5516.97
Tiefenbach Hall A energy : 1148.79
Tiefenbach Hall C energy : 4413.54
Delta(E)/E width (MV_AI_DXWID) : 0
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Left Arm Collimator : 0.064209
Left LVDT HPM :
Left LVDT VPM :
HacL_HPE1313A:0_Ch58 : -0.145996
HacL_HPE1313A:0_Ch55 : 22.998
HacL_HPE1313A:0_Ch54 : -0.0942383
HacL_alignROLL :
HacL_alignPITCH :
HacL_alignHPT :
Right Arm Collimator : -0.000292969
Right LVDT HPM : 3283
Right LVDT VPM : 3868
HacR_HPE1313A:0_Ch58 : -0.557129
HacR_HPE1313A:0_Ch55 : 22.2656
HacR_HPE1313A:0_Ch54 : -0.897461
HacR_alignROLL : 0.466989
HacR_alignPITCH : -0.489172 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
HacR_alignHPT : -0
Wien angle : 30.1995
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : 695.86
Wien field : 20.052
Laser attenuation Hall A : 304
Laser power Hall A : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 69
Half-wave plate (off=out) : OUT
rotating waveplate : 6250
Beam Half-wave plate (off=out) : OUT
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern : Quartet
Target OTR x-position : -7.9589
Target OTR y-position : 7.73516
Target OTR x-width : 0
Target OTR y-width : -0
Target OTR data valid flag : No
Target OTR In/Out : Current is Low
Arc OTR x-position : -1.91001
Arc OTR y-position : 0.28816
Arc OTR x-width : 2.97935
Arc OTR y-width : 3.02946
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out
Polarized 3He Target RTD #1 : 42.0996
Polarized 3He Target RTD #2 : 39.7559
Polarized 3He Target RTD #3 : 48.7207
Polarized 3He Target RTD #4 : 47.5
Polarized 3He Target RTD #5 : 41.748 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Polarized 3He Target RTD #6 : 178.184
Polarized 3He Target RTD #7 : 169.629
Polarized 3He Ref. Cell RTD #8 : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 25.1953
Polarized 3He Ref. Cell RTD #9 : 25.1465
Polarized 3He Ref. Cell RTD #10 : 25.1465
Polarized 3He Target Ref. Cell Gas Pres. : -22.6943
Polarized 3He Target Ref. Cell Sys.Vac. : 10.6781
Polarized 3He Target Cooling Jet : 49.0356
Polarized 3He Target OVEN RTD : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 169.5
Polarized 3He Target OVEN SP1 SET : 170
Polarized 3He Target OVEN SP1 : 170
Polarized 3He Target OVEN AL1 SET : 200
Polarized 3He Target OVEN AL1 : 200
Polarized 3He Target OVEN AL1 STATUS : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. enabled
Polarized 3He Target Half-Wave Plate DIST: 1.2e+06
Polarized 3He Target Half-Wave Plate STAT: 1200000
Polarized 3He Target Position (PA) : 108.881
Polarized 3He Target Position (POS) : BeO+12C LFoil
Polarized 3He Target Position (DA) : 108.881
Polarized 3He Target Position (SS9) : Axis is OK
Polarized 3He Target Position (SA10) : 0
Polarized 3He Target Position (SA9) : 0
Polarized 3He Laser#1 State : 0
Polarized 3He Laser#1 Current : 10
Polarized 3He Laser#1 Temperature : 13.2
Polarized 3He Laser#2 State : 0
Polarized 3He Laser#2 Current : 10
Polarized 3He Laser#2 Temperature : 8.9
Polarized 3He Laser#3 State : 0
Polarized 3He Laser#3 Current : 10
Polarized 3He Laser#3 Temperature : 11
Polarized 3He Laser#4 State : 2
Polarized 3He Laser#4 Current : 38
Polarized 3He Laser#4 Temperature : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 14.9
Polarized 3He Laser#5 State : 0
Polarized 3He Laser#5 Current : 0
Polarized 3He Laser#5 Temperature : 0
Polarized 3He Laser#6 State : 0
Polarized 3He Laser#6 Current : 38.1
Polarized 3He Laser#6 Temperature : 10 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Polarized 3He Laser#7 State : 0
Polarized 3He Laser#7 Current : 40
Polarized 3He Laser#7 Temperature : 9.8
Polarized 3He Coil Current Longitudinal : -6.963
Polarized 3He Coil Current Transverse : -0.045
Transverse gradient coils (A) setup current : 0
Transverse gradient coils (A) readback current : 0
Longitudinal upstream gradient coil (B) setup current : 0
Longitudinal upstream gradient coil (B) readback current : -0.0012207
Longitudinal downstream gradient coil (C) setup current : 2.736
Longitudinal downstream gradient coil (C) readback current : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 2.73315
Small vertical gradient coils (D) setup current : 0
Small vertical gradient coils (D) readback current : 0