Log entry time 20:55:55 on December 21, 2003

Entry number 114953

Beginning-of-run EPICS data for Run Number 1522 at Sun Dec 21 20:55:37 EST 2003
; Prescale factors (integer), downloaded each run at prestart.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; The default factor is essentially infinite. 
; PS1 for main R-arm trigger.
; PS2 for R-arm 2/3 effic. trigger
; PS3 for main L-arm trigger.
; PS4 for L-arm 2/3 effic. trigger
; PS5 for coincidence scintillator trigger
; PS6 for pure Kaon trigger (L-arm)
; PS7 for coincidence of T1 and T6.
; PS8 for 1024 Hz pulser ( put ps=65535 normally )
; At present (Dec 8) there are only T1, T3, T8
ps1=10,ps2=50,ps3=10,ps4=50,ps5=1,ps6=65535,ps7=65535,ps8=65535

 
Right septum set current : 187.94
Right septum current readback : 187.75
Right Arm Q1 power supply current :
Right Arm Q1 momentum : 2.02998
Right Arm Q1 gauss meter : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. -0.03011
Right Arm Q1 power supply polarity :
Right Arm Q2 power supply current : 880.861
Right Arm Q2 momentum : 2.02987
Right Arm Q2 gauss meter : 0.463
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 705.995
Right Arm D1 momentum : 2.03
Right Arm D1 NMR : 0.753308
Right Arm Q3 power supply current : 950.603
Right Arm Q3 momentum : 2.02994
Right Arm Q3 gauss meter : 0.4264
Right Arm Q3 power supply polarity : disabled
Right Arm Top VDC Current :
Right Arm Bottom VDC Current :
Right Arm Top VDC voltage : 4
Right Arm Bottom VDC voltage : 4.00342
Average current of the two cavities : 4.50079
Current on Unser monitor : -0.579662
Current on Upstream bcm : 4.63513
Current on Downstream bcm : 4.36644
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) : 45.8931
Tiefenbach Hall A energy : 0
Tiefenbach Hall C energy : 0
Delta(E)/E width (MV_AI_DXWID) : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 4.87099
HALLA:p : 0
HALLA:dpp : 0
MBSY1c Hall A Beam energy : 2039.67
MBSY3c Hall C Beam energy : 3037.12
MBSY1c magnet current (amp) : 84.8559
MBSY1c Bdl : 509001
Arc1 dp/p : 0
Arc2 dp/p : 0
Right Arm Arm Collimator : -0.000488281
Right LVDT HPM : 3289
Right LVDT VPM : 3860
HacR_HPE1313A:0_Ch58 : -0.548828
HacR_HPE1313A:0_Ch55 : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 21.8262
HacR_HPE1313A:0_Ch54 : -0.890137
HacR_alignROLL : -0.411908
HacR_alignPITCH : -0.00655752
HacR_alignHPT : -0
Right Arm Angle Floor Angle : 12.5
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 12.697
IPM1C12.XPOS : 0.756048
IPM1C12.YPOS : -0.721649
IPM1H04A.XPOS : 0.578516
IPM1H04A.YPOS : 0.445959
IPM1H04B.XPOS : -0.308575
IPM1H04B.YPOS : 0.282275
Survey X offset bpmA : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
Wien angle : -9.69575
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : -230.86
Wien field : 6.3498
Laser attenuation Hall A : 115
Laser power Hall A : 67
Half-wave plate (off=out) : ON
rotating waveplate : 6105
Beam Half-wave plate (off=out) : IN
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern : Quartet
Target OTR x-position :
Target OTR y-position :
Target OTR x-width :
Target OTR y-width :
Target OTR data valid flag :
Target OTR In/Out :
Arc OTR x-position : -0.258374
Arc OTR y-position : -0.0431023
Arc OTR x-width : 2.38795
Arc OTR y-width : 1.30426
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out
Polarized 3He Coil Current Longitudinal :
Polarized 3He Coil Current Transverse : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Transverse gradient coils (A) setup current : 0
Transverse gradient coils (A) readback current : 0
Longitudinal upstream gradient coil (B) setup current : 0
Longitudinal upstream gradient coil (B) readback current : 0
Longitudinal downstream gradient coil (C) setup current : 0
Longitudinal downstream gradient coil (C) readback current : 0
Small vertical gradient coils (D) setup current : 0
Small vertical gradient coils (D) readback current : 0