NEXT
User name a-onl
Log entry time 01:54:48 on December 24, 2003
Entry number 115145
keyword=End_of_Run_1586
****************************
Run Number: 1586
End of Run Comment:
Run_type=other,beam_energy=2.035,beam_halfwaveplate=in,beam_raster=off,comment_text=rich HV1950/400/16, 15 uA beam,daq_mode=WITHRICH,kin_name=,leftarm_p=1.01,leftarm_theta=6,rightarm_p=moving,rightarm_theta=6,target_halfwaveplate=out,target_name=priapus,target_polarization=42.5,target_type=BeO Carbon long foil
PRESCALE FACTORS:ps1=1000 ps2=50 ps3=100 ps4=50 ps5=1 ps6=65535 ps7=65535 ps8=65535
EVENTS[0]: 180373 [+]: 0 [-]: 0
TIME [0]: 5.483 mins [+]: 0.017 mins [-]: 0.017 mins
LIVE [0]: 86.34% [+]: 100.00% [-]: 100.00%
TRIGGER RATES: PRES/REAL
T1[0] : 0.2/194.6 Hz T2[0] : 0.0/0.0 Hz T3[0] :628.3/62826.9 Hz T4[0] : 0.0/0.0 Hz T5[0] : 6.6/6.6 Hz T8[0] : 0.0/1024.0 Hz
T1[+] : 0.0/0.0 Hz T2[+] : 0.0/0.0 Hz T3[+] : 0.0/0.0 Hz T4[+] : 0.0/0.0 Hz T5[+] : 0.0/0.0 Hz T8[+] : 0.0/0.0 Hz
T1[-] : 0.0/0.0 Hz T2[-] : 0.0/0.0 Hz T3[-] : 0.0/0.0 Hz T4[-] : 0.0/0.0 Hz T5[-] : 0.0/0.0 Hz T8[-] : 0.0/0.0 Hz
TRIGGER TOTALS: PRES/REAL
T1[0] : 64/64027 T2[0] : 0/0 T3[0] : 206676/20667646 T4[0] : 0/0 T5[0] : 2177/2177 T8[0] : 5/336857
T1[+] : 0/0 T2[+] : 0/0 T3[+] : 0/0 T4[+] : 0/0 T5[+] : 0/0 T8[+] : 0/0
T1[-] : 0/0 T2[-] : 0/0 T3[-] : 0/0 T4[-] : 0/0 T5[-] : 0/0 T8[-] : 0/0
AVERAGE CURRENT
BCM x1 : 12.5992uA BCM x3 : 12.4968uA BCM x10: 12.4843uA
APPROXIMATE CURRENT ASYMMETRIES
BCM u1 : 1E+39 ppm BCM u3 : 1E+39 ppm BCM u10: 1E+39 ppm
BCM d1 : 1E+39 ppm BCM d3 : 1E+39 ppm BCM d10: 1E+39 ppm
APPROXIMATE BCM CHARGES (C)
BCM u1 [0]:0.004146 BCM u3 [0]:0.00411 BCM u10[0]:0.004104
BCM u1 [+]:-1.149E-07 BCM u3 [+]:-4.003E-08 BCM u10[+]:-2.898E-08
BCM u1 [-]:-1.149E-07 BCM u3 [-]:-4.003E-08 BCM u10[-]:-2.898E-08
BCM d1 [0]:0.004143 BCM d3 [0]:0.004112 BCM d10[0]:0.004109
BCM d1 [+]:-2.559E-08 BCM d3 [+]:-2.627E-08 BCM d10[+]:-2.334E-08
BCM d1 [-]:-2.559E-08 BCM d3 [-]:-2.627E-08 BCM d10[-]:-2.334E-08
****************************
End-of-run EPICS data for Run Number 1586 at Wed Dec 24 01:15:27 EST 2003
Left Arm D1 momentum : 1.01189
Left Arm arm angle : 0
Right Arm D1 momentum : 1.08119
Right Arm arm angle : 12.697
HALLA:p : 0
HALLA:dpp : 0
Tiefenbach Hall A energy : 0
Left Arm arm mispointing (HPT) :
Right Arm arm mispointing (HPT) : -0
Left Arm Top VDC Current : -0.244141
Left Arm Bottom VDC Current : -6.10352
Right Arm Top VDC Current :
Right Arm Bottom VDC Current :
Right septum set current : 93.51
Right septum current readback : 93.25
Left Arm Q1 power supply current :
Left Arm Q1 momentum : 1.00997
Left Arm Q1 gauss meter :
Left Arm Q1 power supply polarity :
Left Arm Q2 power supply current : 438.172
Left Arm Q2 momentum : 1.00973
Left Arm Q2 gauss meter :
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 336.781
Left Arm D1 momentum : 1.01
Left Arm D1 NMR : 0.373929
Left Arm Q3 power supply current : 472.963
Left Arm Q3 momentum : 1.00998
Left Arm Q3 gauss meter :
Left Arm Q3 power supply polarity : disabled
Right Arm Q1 power supply current :
Right Arm Q1 momentum : 1.00999
Right Arm Q1 gauss meter : -0.015137
Right Arm Q1 power supply polarity :
Right Arm Q2 power supply current : 438.264
Right Arm Q2 momentum :
Right Arm Q2 gauss meter : 0.2304
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 301.597
Right Arm D1 momentum : 1.07971
Right Arm D1 NMR : 0.400669
Right Arm Q3 power supply current : 472.951
Right Arm Q3 momentum : 1.00995
Right Arm Q3 gauss meter : 0.2119
Right Arm Q3 power supply polarity : disabled
Average current of the two cavities : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 13.2976
Current on Unser monitor : 9.41713
Current on Upstream bcm : 13.504
Current on Downstream bcm : 13.0911
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) : 18.6019
Hall C Current :
MBSY1c Hall A Beam energy : 2039.67
MBSY1c magnet current (amp) : 84.8559
MBSY1c Bdl : 509001
MBSY3c Hall C Beam energy : 3035.52
Tiefenbach Hall A energy : 0
Tiefenbach Hall C energy : 0
Delta(E)/E width (MV_AI_DXWID) : 0
IPM1C12.XPOS : -0.338086
IPM1H04A.XPOS : 0.0215909
IPM1H04A.YPOS : -0.0830081
IPM1H04B.XPOS : -0.0938031
IPM1H04B.YPOS : -0.127312
Left Arm Collimator : 0.0570313
Left LVDT HPM :
Left LVDT VPM :
HacL_HPE1313A:0_Ch58 : -0.190918
HacL_HPE1313A:0_Ch55 : 23.7793
HacL_HPE1313A:0_Ch54 : 0.0541992
HacL_alignROLL :
HacL_alignPITCH :
HacL_alignHPT :
Right Arm Collimator : -0.000488281
Right LVDT HPM : 3290
Right LVDT VPM : 3860
HacR_HPE1313A:0_Ch58 : -0.548828
HacR_HPE1313A:0_Ch55 : 22.0215
HacR_HPE1313A:0_Ch54 : -0.888184
HacR_alignROLL : -0.408783
HacR_alignPITCH : -0.00675616
HacR_alignHPT : -0
Wien angle : -9.69575
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : -230.86
Wien field : 6.3498
Laser attenuation Hall A : 208
Laser power Hall A : 67
Half-wave plate (off=out) : ON
rotating waveplate : 6117
Beam Half-wave plate (off=out) : IN
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern : Quartet
Target OTR x-position :
Target OTR y-position :
Target OTR x-width :
Target OTR y-width :
Target OTR data valid flag : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Target OTR In/Out :
Arc OTR x-position : 2.64302
Arc OTR y-position : 0.737304
Arc OTR x-width : 0.762842
Arc OTR y-width : 1.05221
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out
Polarized 3He Target RTD #1 :
Polarized 3He Target RTD #2 :
Polarized 3He Target RTD #3 :
Polarized 3He Target RTD #4 :
Polarized 3He Target RTD #5 :
Polarized 3He Target RTD #6 :
Polarized 3He Target RTD #7 :
Polarized 3He Ref. Cell RTD #8 :
Polarized 3He Ref. Cell RTD #9 :
Polarized 3He Ref. Cell RTD #10 :
Polarized 3He Target Ref. Cell Gas Pres. :
Polarized 3He Target Ref. Cell Sys.Vac. :
Polarized 3He Target Cooling Jet :
Polarized 3He Target OVEN RTD :
Polarized 3He Target OVEN SP1 SET :
Polarized 3He Target OVEN SP1 :
Polarized 3He Target OVEN AL1 SET :
Polarized 3He Target OVEN AL1 :
Polarized 3He Target OVEN AL1 STATUS :
Polarized 3He Target Half-Wave Plate DIST:
Polarized 3He Target Half-Wave Plate STAT:
Polarized 3He Target Position (PA) :
Polarized 3He Target Position (POS) :
Polarized 3He Target Position (DA) :
Polarized 3He Target Position (SS9) :
Polarized 3He Target Position (SA10) :
Polarized 3He Target Position (SA9) :
Polarized 3He Laser#1 State :
Polarized 3He Laser#1 Current :
Polarized 3He Laser#1 Temperature :
Polarized 3He Laser#2 State :
Polarized 3He Laser#2 Current :
Polarized 3He Laser#2 Temperature :
Polarized 3He Laser#3 State :
Polarized 3He Laser#3 Current :
Polarized 3He Laser#3 Temperature :
Polarized 3He Laser#4 State :
Polarized 3He Laser#4 Current :
Polarized 3He Laser#4 Temperature :
Polarized 3He Laser#5 State :
Polarized 3He Laser#5 Current :
Polarized 3He Laser#5 Temperature :
Polarized 3He Laser#6 State :
Polarized 3He Laser#6 Current :
Polarized 3He Laser#6 Temperature :
Polarized 3He Laser#7 State :
Polarized 3He Laser#7 Current :
Polarized 3He Laser#7 Temperature :
Polarized 3He Coil Current Longitudinal :
Polarized 3He Coil Current Transverse :
Transverse gradient coils (A) setup current : 0
Transverse gradient coils (A) readback current : 0
Longitudinal upstream gradient coil (B) setup current : 0
Longitudinal upstream gradient coil (B) readback current : 0
Longitudinal downstream gradient coil (C) setup current : 0
Longitudinal downstream gradient coil (C) readback current : 0
Small vertical gradient coils (D) setup current : 0
Small vertical gradient coils (D) readback current : 0