• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT

    User name a-onl

    Log entry time 20:49:55 on April 16, 2004

    Entry number 118151

    keyword=Start_Run_2443,Run_type=other,beam_energy=3.776,beam_halfwaveplate=in,beam_raster=off,comment_text=carbon, no raster, bull's eye scan,daq_mode=WITHRICH,kin_name=,leftarm_p=1.96,leftarm_theta=6,rightarm_p=1.57,rightarm_theta=6,target_halfwaveplate=out,target_name=priapus,target_polarization=42.5,target_type=Thick Carbon
    Beginning-of-run EPICS data for Run Number 2443 at Fri Apr 16 20:49:19 EDT 2004
    ; Prescale factors (integer), downloaded each run at prestart.
    ; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
    ; Change this file only in-between runs. 
    ; The default factor is essentially infinite. 
    ; PS1 for main R-arm scintillator trigger.
    ; PS2 for R-arm 2/3 efficiency trigger
    ; PS3 for main L-arm scintillator trigger.
    ; PS4 for L-arm 2/3 efficiency trigger
    ; PS5 for coincidence scintillator trigger (T1.and.T3)
    ; PS6 for pure Kaon trigger (L-arm) = T3.and.NOT.A1.and.A2
    ; PS7 for coincidence of T1 and T6.
    ; PS8 for 1024 Hz pulser ( put ps=65535 normally )
    
    ps1=30,ps2=1000,ps3=10,ps4=1000,ps5=1,ps6=5000,ps7=1,ps8=65535
    
     
    Left septum set current : 181.46
    Left septum current readback : 181.5
    Left septum upper coil T : 6.1
    Left septum lower coil T : 6.2
    Left septum yoke T : 4.8
    Left septum bore shield T : 80.75
    Left Arm Q1 momentum : 1.96
    Left Arm Q2 power supply current : 850.4
    Left Arm Q2 momentum : 1.95967
    Left Arm Q2 power supply polarity : enabled
    Left Arm D1 power supply current : 664.996
    Left Arm D1 momentum : 1.96
    Left Arm D1 NMR : 0.725275
    Left Arm Q3 power supply current : 917.923
    Left Arm Q3 momentum : 1.96016
    Left Arm Q3 power supply polarity : enabled
    Right septum set current : 145.35
    Right septum current readback : 145
    Right septum upper coil T : 7.05
    Right septum lower coil T : 6.5
    Right septum yoke T : 5.75
    Right septum bore shield T : 12.35
    Right Arm Q1 momentum : 1.56988
    Right Arm Q1 gauss meter : -0.023371
    Right Arm Q2 power supply current : 681.234
    Right Arm Q2 momentum : 1.56984
    Right Arm Q2 gauss meter : 0.3581
    Right Arm Q2 power supply polarity : enabled
    Right Arm D1 power supply current : 539.986
    Right Arm D1 momentum : 1.57
    Right Arm D1 NMR : 0.582606
    Right Arm Q3 power supply current : 735.1
    Right Arm Q3 momentum : 1.56975
    Right Arm Q3 gauss meter : 0.33
    Right Arm Q3 power supply polarity : disabled
    Right Arm Top VDC voltage : 4.00684
    Right Arm Bottom VDC voltage : 4.00732
    Average current of the two cavities : 4.70986
    Current on Unser monitor : -1.24869
    Current on Upstream bcm : 4.70281
    Current on Downstream bcm : 4.75549
    Upstream Cavity Coefficient : 76.7
    Downstream Cavity Coefficient : 78.9
    Current on IBC0L02 (source) : 44.2978
    Tiefenbach Hall A energy : 3776.37
    Tiefenbach Hall C energy : 3030.57
    Delta(E)/E width (MV_AI_DXWID) : 1.88092
    HALLA:p : 3776.16
    HALLA:dpp : -0.000172505
    MBSY1c Hall A Beam energy : 3783.6
    MBSY3c Hall C Beam energy : 3038.29
    MBSY1c magnet current (amp) : 157.639
    MBSY1c Bdl : 944201
    Arc1 dp/p : 0
    Arc2 dp/p : 0
    IPM1C12.XPOS : -0.0597264
    IPM1C12.YPOS : -0.0826179
    IPM1H04A.XPOS : 4.04048
    IPM1H04A.YPOS : -2.05342
    IPM1H04B.XPOS : -0.209829
    IPM1H04B.YPOS : -2.29431
    Survey X offset bpmA : -0.63
    Survey Y offset bpmA : -0.9
    Survey X offset bpmB : 0.77
    Survey Y offset bpmB : -1
    Wien angle : 2.49577
    Helicity Mode ON/OFF Random/Toggle : OFF
    Wien BDL : 64.655
    Wien field : 1.5373
    Laser attenuation Hall A : 90
    Laser power Hall A : 100
    Half-wave plate (off=out) : OUT
    rotating waveplate : 7745
    Beam Half-wave plate (off=out) : OUT
    G0 Helicity Settle Set : 500 usec
    G0 Helicity Delay Set : 8 cycles
    G0 Helicity Pattern Set : Quartet
    G0 Helicity Settle Read : 500 usec !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
    G0 Helicity Delay Read : 8 cycles
    G0 Helicity Pattern : Quartet
    RICH Vmon 16 : 2103.8
    RICH Vmon 16 : 2103.8
    RICH Imon 16 : 0.04
    RICH Imon 16 : 0.04
    RICH Vmon 17 : 401.4
    RICH Vmon 17 : 401.4
    RICH Imon 17 : 0.01
    RICH Imon 17 : 0.01
    RICH Radiator Oxygen : 0.0976562
    RICH Radiator Oxygen : 0.0976562
    RICH Radiator Moisture : 401.172
    RICH Radiator Moisture : 401.172
    RICH Radiator Pressure : 9.62646
    RICH Radiator Pressure : 9.62646
    RICH Condensor temperature : -244.191
    RICH Condensor temperature : -244.191
    RICH Gas Oxygen : 28.7109
    RICH Gas Oxygen : 28.7109
    RICH Gas Moisture : 4.00391
    RICH Gas Moisture : 4.00391
    RICH Argon Flow : 0.878906
    RICH Argon Flow : 0.878906
    RICH Methane Flow : 800.586
    RICH Methane Flow : 800.586
    RICH A Volts : 3.80957
    RICH A Volts : 3.80957
    RICH B Volts : -3.90918
    RICH B Volts : -3.90918