Log entry time 14:19:20 on July 27, 2004

Entry number 129795

Beginning-of-run EPICS data for Run Number 1322 at Tue Jul 27 14:18:40 EDT 2004
; Prescale factors (integer), downloaded each run at prestart.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; Change this file only in-between runs. 
; The default factor is essentially infinite. 
; PS1 for R-arm S2m scintillator trigger ("or" of S2m)
; PS2 for R-arm HAPPEX electron calorimeter trigger
; PS3 for L-arm S2m scintillator trigger ("or" of S2m).
; PS4 for L-arm HAPPEX electron calorimeter trigger
; PS5 for R-arm UMass/Smith Q^2 Profile Scanner PMT
; PS6 for L-arm UMass/Smith Q^2 Profile Scanner PMT
; PS8 for 1024 Hz pulser ( put ps=65535 normally or =4 for spot++ check )

ps1=600,ps2=467,ps3=533,ps4=400,ps5=65535,ps6=65535,ps7=65535,ps8=4
 
Left septum set current : 275.5
Left septum current readback : -2.5
Left septum upper coil T : 21.25
Left septum lower coil T : 9.45
Left septum yoke T : 8.2
Left septum bore shield T : 82
Left Arm Q1 momentum : 2.97095
Left Arm Q2 power supply current : 1289.44
Left Arm Q2 momentum : 2.9714
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 1040.97
Left Arm D1 momentum : 2.971
Left Arm D1 NMR : 1.10008
Left Arm Q3 power supply current : 1391.23
Left Arm Q3 momentum : 2.97087
Left Arm Q3 power supply polarity : disabled
Right septum set current : 275.35
Right septum current readback : 274.25
Right septum upper coil T : 6.7
Right septum lower coil T : 6.4
Right septum yoke T : 5.75
Right septum bore shield T : 73.15
Right Arm Q1 momentum : 2.95992
Right Arm Q1 gauss meter : -0.04378
Right Arm Q2 power supply current : 1284.32
Right Arm Q2 momentum : 2.9596
Right Arm Q2 gauss meter : 0.6743
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 1061.02
Right Arm D1 momentum : 2.95999
Right Arm D1 NMR : 1.09842
Right Arm Q3 power supply current : 1386.24
Right Arm Q3 momentum : 2.96022
Right Arm Q3 gauss meter : 0.6218
Right Arm Q3 power supply polarity : disabled
Right Arm Top VDC voltage : -0.00683594
Right Arm Bottom VDC voltage : -0.00537109
Average current of the two cavities : 4.99943
Current on Unser monitor : -3.29937
Current on Upstream bcm : 4.94529
Current on Downstream bcm : 5.0268
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) : 4.99681
Tiefenbach Hall A energy : 3028.91 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Tiefenbach Hall C energy : 4021.28
Delta(E)/E width (MV_AI_DXWID) : 12.6994
HALLA:p : 3028.9
HALLA:dpp : -1.802e-05
MBSY1c Hall A Beam energy : 3033.65
MBSY3c Hall C Beam energy : 4033.04
MBSY1c magnet current (amp) : 126.301
MBSY1c Bdl : 757052
Arc1 dp/p : 0
Arc2 dp/p : 0
IPM1C12.XPOS : 0.00121376
IPM1C12.YPOS : 0.153397
IPM1H04A.XPOS : 0.0363525
IPM1H04A.YPOS : -0.0842179
IPM1H04B.XPOS : 0.0182
IPM1H04B.YPOS : -0.0752873
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
Wien angle : 15.9458
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : 361.48
Wien field : 10.527
Laser attenuation Hall A : 128
Laser power Hall A : 100
Half-wave plate (off=out) : OUT
rotating waveplate : 3650 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Beam Half-wave plate (off=out) : OUT
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Pair
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern : Pair
RICH Vmon 16 : 0
RICH Vmon 16 : 0
RICH Imon 16 : 0
RICH Imon 16 : 0
RICH Vmon 17 : 0
RICH Vmon 17 : 0
RICH Imon 17 : 0
RICH Imon 17 : 0
RICH Radiator Oxygen : -0.976562
RICH Radiator Oxygen : -0.976562
RICH Radiator Moisture : -0.976562
RICH Radiator Moisture : -0.976562
RICH Radiator Pressure : 0.634277
RICH Radiator Pressure : 0.634277
RICH Condensor temperature : 20.3105
RICH Condensor temperature : 20.3105
RICH Gas Oxygen : -0.683594
RICH Gas Oxygen : -0.683594
RICH Gas Moisture : -0.683594
RICH Gas Moisture : -0.683594
RICH Argon Flow : 5.66406
RICH Argon Flow : 5.66406
RICH Methane Flow : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 0.878906
RICH Methane Flow : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 0.878906
RICH A Volts : 0.364746
RICH A Volts : 0.364746
RICH B Volts : 0.199219
RICH B Volts : 0.199219