• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT

    User name R. Michaels

    Log entry time 01:03:52 on February27,2006

    Entry number 164141

    Followups:

    keyword=ROC4 added, bye-bye 767s

    Fastbus crate ROC4 was added to the readout. The GeN and Gen_ped
    configs work, but the Gen_buf config is temporarily unavailable.
    Need to make some cables to gather fastbus busy signals, then
    buffering will work.

    I had a lot of trouble with ROC4. The main problem was that when
    I had all 16 modules in one block read, the slots 12-15 would not
    report. It had nothing to do with modules (I swapped them around,
    plus I ran fastbus test codes -- all modules are ok). Finally I
    avoided slots 12-15 and have 2 block reads. This works. Actually
    I'm also avoiding slot 16, I won't explain why. So there are 16
    module in this crate, slot 4-11 and 17-24.

    Note: All FB crate voltages are ok, but the front panel
    reading of 2V is erroneous (says zero).