NEXT
User name a-onl
Log entry time 06:26:56 on April 9, 2008
Entry number 230876
keyword=Start_Run_2608,Run_type=Production,target_type=Loop 1 LH2 6 cm,beam_e0=1.1938,beam_raster=off,leftarm_p=0.986,leftarm_theta=16.5,leftarm_colli=out,bbarm_i=390,bbarm_theta=54,bbarm_colli=out,comment_text=
Run Timestamp: Wed Apr 9 06:25:50 EDT 2008
Beginning-of-run EPICS data for Run Number 2608 at Wed Apr 9 06:26:47 EDT 2008
Run_type=Production
target_type=Loop 1 LH2 6 cm
beam_e0=1.1938
beam_raster=off
leftarm_p=0.986
leftarm_theta=16.5
leftarm_colli=out
bbarm_i=390
bbarm_theta=54
bbarm_colli=out
comment_text=
; BBite+HRS DAQ on adaql2/a-onl account
; Prescale factors (integer), downloaded each run at prestart.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; Change this file only in-between runs.
; Maxima: (2^24)-1 = 16777215 for T1-T4 and 65535 for T5-T8
; The default factor is essentially infinite.
; T1 = BigBite E-plane
; T2 = BigBite dE-plane
; T3 = L-HRS Singles
; T4 = L-HRS Efficiency
; T5 = T1.AND.T3
; T6 = T2.AND.T3
; T7 = L-HRS Singles (center S1 paddles.AND.S2)
; T8 = 1024 Hz pulser
; String should be one line, no spaces, ending in carriage return
ps1=46000,ps2=83000,ps3=1800,ps4=360,ps5=1,ps6=1,ps7=470,ps8=100
Left Arm Q1 momentum : 0.986095
Left Arm Q1 power supply : 741.871
Left Arm Q1 gauss meter : -0.06265
Left Arm Q2 power supply current : 424.6
Left Arm Q2 momentum : 0.986066
Left Arm Q2 gauss meter : 0.168
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 327.358
Left Arm D1 momentum : 0.985995
Left Arm D1 NMR : 0.365079
Left Arm Q3 power supply current : 392.583
Left Arm Q3 momentum : 0.986095
Left Arm Q3 gauss meter : -0.19905
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.3524
-----
Right Arm Q1 momentum : 0.473527
Right Arm Q1 power supply : 356.062
Right Arm Q1 gauss meter : -0.008978
Right Arm Q2 power supply current : 203.719
Right Arm Q2 momentum : 0.473361
Right Arm Q2 gauss meter : 0.10716
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 162.976
Right Arm D1 momentum : 0.473507
Right Arm D1 NMR : 0.175713
Right Arm Q3 power supply current : 188.41
Right Arm Q3 momentum : 0.4735
Right Arm Q3 gauss meter : 0.08435
Right Arm Q3 power supply polarity : disabled
Right Arm B Field Hall Probe (D-G) : -0.17384
-----
BigBite magnet current setpoint : 390
BigBite magnet current readback : 388.1
BigBite Gaussmeter readback : -3255
-----
Left Arm Top VDC Current : -0.0976562
Left Arm Bottom VDC Current : 0.927734
Left Arm Top VDC voltage : 3.99609
Left Arm Bottom VDC voltage : 3.99512
-----
Right Arm Top VDC Current : -2.92969
Right Arm Bottom VDC Current : -2.63672
Right Arm Top VDC voltage : 4.00049
Right Arm Bottom VDC voltage : 4.00635
-----
Average current of the two cavities : 0.0237069
Current on Unser monitor : 10.9165
Current on Upstream bcm : 0.0355217
Current on Downstream bcm : 0.0118921
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 0.00618606
Hall C Current : 0
Hall A momentum (Tiefenbach) (HALLA:p) : 1193.37
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 1193.56
Hall A energy (halla_MeV) : 1193.37
Hall C energy (hallc_MeV) : 5714.53
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c magnet current (amp) : 49.4951
MBSY1c Bdl : 298039
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 1.5
Raster Y width : 1
-----
Left Arm Collimator : 0.871143
HacL_HPE1313A:0_Ch58 : -0.181152
HacL_HPE1313A:0_Ch55 : 23.291
HacL_HPE1313A:0_Ch54 : 0.0888672
Left Arm Angle Floor Angle : 16.5
Left Arm Angle Vernier : 31
Left Arm Scattering Angle : 16.4997
-----
Right Arm Arm Collimator : -0.00234375
HacR_HPE1313A:0_Ch58 : -0.588379
HacR_HPE1313A:0_Ch55 : 21.875
HacR_HPE1313A:0_Ch54 : -0.845703
Right Arm Angle Floor Angle : 105
Right Arm Angle Vernier : -34
Right Arm Scattering Angle : 105.001
-----
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
-----
Wien angle : -40.2035
Helicity Mode ON/OFF Random/Toggle : OFF
Wien field : 26.736
Laser attenuation Hall A : 600
Laser power Hall A : 100
Half-wave plate (off=out) : IN
rotating waveplate : 0
Beam Half-wave plate (off=out) : IN
-----
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : No Delay
G0 Helicity Pattern Set : Quartet
G0 Helicity Cycle Rate Set : 30 Hz
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : No Delay
G0 Helicity Pattern : Quartet
G0 Helicity Cycle Rate Read : 30 Hz
-----
Target : L1 6cm
fan frequency loop 1 : 36
fan frequency loop 2 : 36
fan frequency loop 3 : 0
Encoder position : 3.13948e+07
Target type : 3.13948e+07
temperature loop 1(1) : 20
temperature loop 1(2) : 20.01
temperature loop 1(3) : 20.3
Heat exchange H2 : 22.4
temperature loop 2(1) : 23.42
temperature loop 2(2) : 23.41
temperature loop 2(3) : 119.99
Heat exchange D2 : 23.4
pressure loop He : 26.991
pressure loop H2 before : 22.6978
pressure loop H2 return : 23.3799
HPH He loop 1 : 82.9997
HPH He loop 2 : 57.3858
----
SLI data valid? : No
SLI horiz size mm : 0
SLI Energy spread *10^5 : 0
SLI x position : 2.57888
SLI vert. size mm : 0
SLI y position : 2.00563
-----
Left S2 HV
S2 Slot0 ch0 : -2311
S2 Slot0 ch1 : -2212.3
S2 Slot0 ch2 : -2166.4
S2 Slot0 ch3 : -2231.2
S2 Slot0 ch4 : -1793.1
S2 Slot0 ch5 : -2165.8
S2 Slot0 ch6 : -1940.7
S2 Slot0 ch7 : -1876.9
S2 Slot0 ch8 : -2030.4
S2 Slot0 ch9 : -1888.8
S2 Slot0 ch10 : -2094.7
S2 Slot0 ch11 : -1867.9
-----
Left S1 HV
S1 Slot1 ch0 : -3
S1 Slot1 ch1 : -1809.7
S1 Slot1 ch2 : -1790.9
S1 Slot1 ch3 : -1818.4
S1 Slot1 ch4 : -1700.3
S1 Slot1 ch5 : -2.8
S1 Slot1 ch6 : -2
S1 Slot1 ch7 : -1701
S1 Slot1 ch8 : -1961.6
S1 Slot1 ch9 : -1745.9
S1 Slot1 ch10 : -1797.1
S1 Slot1 ch11 : -2.5
-----
Left Cerenkov HV
GCER Slot2 ch0 : -1543.5
GCER Slot2 ch1 : -1462.1
GCER Slot2 ch2 : -1528
GCER Slot2 ch3 : -1453
GCER Slot2 ch4 : -1798.1
GCER Slot2 ch5 : -1983.6
GCER Slot2 ch6 : -1750.5
GCER Slot2 ch7 : -1751.9
GCER Slot2 ch8 : -2009.9
GCER Slot2 ch9 : -1587.9
GCER Slot2 ch10 : -15
GCER Slot2 ch11 : -22.1
-----
Left Pion Rejector Layer 1 HV
PRL1 Slot3 ch0 : -860.4
PRL1 Slot3 ch1 : -784.5
PRL1 Slot3 ch2 : -905.8
PRL1 Slot3 ch3 : -980.5
PRL1 Slot3 ch4 : -730.3
PRL1 Slot3 ch5 : -811
PRL1 Slot3 ch6 : -1081.3
PRL1 Slot3 ch7 : -990.8
PRL1 Slot3 ch8 : -810.5
PRL1 Slot3 ch9 : -790.9
PRL1 Slot3 ch10 : -829.5
PRL1 Slot3 ch11 : -785.3
PRL1 Slot4 ch0 : -870.1
PRL1 Slot4 ch1 : -900.5
PRL1 Slot4 ch2 : -750
PRL1 Slot4 ch3 : -895.9
PRL1 Slot4 ch4 : -921.7
PRL1 Slot4 ch5 : -821.2
PRL1 Slot4 ch6 : -836
PRL1 Slot4 ch7 : -826.4
PRL1 Slot4 ch8 : -1190.3
PRL1 Slot4 ch9 : -991.4
PRL1 Slot4 ch10 : -1031.7
PRL1 Slot4 ch11 : -861.4
PRL1 Slot5 ch0 : -1041.1
PRL1 Slot5 ch1 : -871
PRL1 Slot5 ch2 : -916.2
PRL1 Slot5 ch3 : -735.8
PRL1 Slot5 ch4 : -890.7
PRL1 Slot5 ch5 : -810.3
PRL1 Slot5 ch6 : -821.1
PRL1 Slot5 ch7 : -895.6
PRL1 Slot5 ch8 : -741.3
PRL1 Slot5 ch9 : -841.4
PRL1 Slot5 ch10 : -16.5
PRL1 Slot5 ch11 : -25.6
-----
Left Pion Rejector Layer 2 HV
PRL2 Slot9 ch0 : -920.5
PRL2 Slot9 ch1 : -880.5
PRL2 Slot9 ch2 : -800.1
PRL2 Slot9 ch3 : -869.9
PRL2 Slot9 ch4 : -810.9
PRL2 Slot9 ch5 : -941.5
PRL2 Slot9 ch6 : -850.7
PRL2 Slot9 ch7 : -890.6
PRL2 Slot9 ch8 : -810.6
PRL2 Slot9 ch9 : -780.6
PRL2 Slot9 ch10 : -821
PRL2 Slot9 ch11 : -851.4
PRL2 Slot10 ch0 : -755.7
PRL2 Slot10 ch1 : -812.4
PRL2 Slot10 ch2 : -871
PRL2 Slot10 ch3 : -900.8
PRL2 Slot10 ch4 : -881.4
PRL2 Slot10 ch5 : -871
PRL2 Slot10 ch6 : -815.2
PRL2 Slot10 ch7 : -824.8
PRL2 Slot10 ch8 : -760.3
PRL2 Slot10 ch9 : -715.7
PRL2 Slot10 ch10 : -911
PRL2 Slot10 ch11 : -781.3
PRL2 Slot11 ch0 : -1000.7
PRL2 Slot11 ch1 : -900.4
PRL2 Slot11 ch2 : -850.6
PRL2 Slot11 ch3 : -1079.9
PRL2 Slot11 ch4 : -1050.2
PRL2 Slot11 ch5 : -800
PRL2 Slot11 ch6 : -860.4
PRL2 Slot11 ch7 : -1031.3
PRL2 Slot11 ch8 : -911.3
PRL2 Slot11 ch9 : -880.3
PRL2 Slot11 ch10 : -13.7
PRL2 Slot11 ch11 : -25.5
-----
# Map Error Measured Voltage
*** Error - Detector name -D Error is unknown
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - adev for NA and adaql3 for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error in information retrieval in -D Error -c GET -P MV
# Map Error Measured Current
*** Error - Detector name -D Error is unknown
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - adev for NA and adaql3 for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error in information retrieval in -D Error -c GET -P MC
BigBite thresholds E dE(tdc) dE(trigger)
Wed Apr 9 04:12:22 EDT 2008 550 280 280
Threshold for 'mwdc_back' is +4.998 V (2730)
Threshold for 'mwdc_front' is +4.998 V (2730)