NEXT
User name a-onl
Log entry time 17:45:50 on May 9, 2008
Entry number 237853
keyword=Start_Run_1007,Run_type=Test,target_type=Loop 1 LH2 6 cm,beam_e0=2.323,beam_raster=off,leftarm_p=1.938,leftarm_theta=18.2,leftarm_colli=out,bbarm_i=390,bbarm_theta=54.,bbarm_colli=out,comment_text=test
Run Timestamp: Fri May 9 17:45:25 EDT 2008
Beginning-of-run EPICS data for Run Number 1007 at Fri May 9 17:45:27 EDT 2008
Run_type=Test
target_type=Loop 1 LH2 6 cm
beam_e0=2.323
beam_raster=off
leftarm_p=1.938
leftarm_theta=18.2
leftarm_colli=out
bbarm_i=390
bbarm_theta=54.
bbarm_colli=out
comment_text=test
; BBite+HRS DAQ on adaql2/a-onl account
; Prescale factors (integer), downloaded each run at prestart.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; Change this file only in-between runs.
; Maxima: (2^24)-1 = 16777215 for T1-T4 and 65535 for T5-T8
; The default factor is essentially infinite.
; T1 = BigBite E-plane
; T2 = BigBite dE-plane
; T3 = L-HRS Singles
; T4 = L-HRS Efficiency
; T5 = T1.AND.T7
; T6 = T2.AND.T7
; T7 = L-HRS Singles (center S1 paddles.AND.S2)
; T8 = 1024 Hz pulser
; String should be one line, no spaces, ending in carriage return
ps1=120000,ps2=120000,ps3=870,ps4=34,ps5=1,ps6=65,ps7=600,ps8=1
Left Arm Q1 momentum : 0.00220769
Left Arm Q1 power supply : 0
Left Arm Q1 gauss meter : 0.0001679
Left Arm Q2 power supply current : 0.0076673
Left Arm Q2 momentum : 0.00304289
Left Arm Q2 gauss meter : 0.0008438
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : -1.38245
Left Arm D1 momentum : 0.00346575
Left Arm D1 NMR : 0.21246
Left Arm Q3 power supply current : 1.39424
Left Arm Q3 momentum : 0.00781097
Left Arm Q3 gauss meter : -0.0007961
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.001245
-----
Right Arm Q1 momentum : 0.00224814
Right Arm Q1 power supply : 0
Right Arm Q1 gauss meter : 2.24e-05
Right Arm Q2 power supply current : -0.000129409
Right Arm Q2 momentum : -3.00694e-07
Right Arm Q2 gauss meter : 0.000637
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 1.90378
Right Arm D1 momentum : 0.0114272
Right Arm D1 NMR : 0.511222
Right Arm Q3 power supply current : -2.24178e-05
Right Arm Q3 momentum : -5.63391e-08
Right Arm Q3 gauss meter : 0.0001537
Right Arm Q3 power supply polarity : enabled
Right Arm B Field Hall Probe (D-G) : -0.004193
-----
BigBite magnet current setpoint : 0
BigBite magnet current readback : 0
BigBite Gaussmeter readback : -0.0003986
-----
Left Arm Top VDC Current : -2.05078
Left Arm Bottom VDC Current : -1.5625
Left Arm Top VDC voltage : 3.99316
Left Arm Bottom VDC voltage : 3.99609
-----
Right Arm Top VDC Current : 2.05078
Right Arm Bottom VDC Current : 1.75781
Right Arm Top VDC voltage : 4.00098
Right Arm Bottom VDC voltage : 4.00684
-----
Average current of the two cavities : 0.0233199
Current on Unser monitor : 12.6178
Current on Upstream bcm : 0.0344908
Current on Downstream bcm : 0.0121491
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 0.00203383
Hall C Current : 0
Hall A momentum (Tiefenbach) (HALLA:p) : 2322.79
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 2323.56
Hall A energy (halla_MeV) : 2322.79
Hall C energy (hallc_MeV) : 5710.72
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c magnet current (amp) : 0.0377198
MBSY1c Bdl : 580381
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 1
Raster Y width : 1
-----
Left Arm Collimator : 0.871338
HacL_HPE1313A:0_Ch58 : -0.308105
HacL_HPE1313A:0_Ch55 : 24.1699
HacL_HPE1313A:0_Ch54 : -0.413086
Left Arm Angle Floor Angle : 0
Left Arm Angle Vernier : 0
Left Arm Scattering Angle : -0.179
-----
Right Arm Arm Collimator : -0.00717773
HacR_HPE1313A:0_Ch58 : -0.564941
HacR_HPE1313A:0_Ch55 : 22.9492
HacR_HPE1313A:0_Ch54 : -0.984375
Right Arm Angle Floor Angle : 105
Right Arm Angle Vernier : -34.5
Right Arm Scattering Angle : 104.998
-----
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
-----
Wien angle : -13.5301
Helicity Mode ON/OFF Random/Toggle : OFF
Wien field : 8.9125
Laser attenuation Hall A : 140
Laser power Hall A : 100
Half-wave plate (off=out) : IN
rotating waveplate : 0
Beam Half-wave plate (off=out) : IN
-----
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : No Delay
G0 Helicity Pattern Set : Quartet
G0 Helicity Cycle Rate Set : 30 Hz
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : No Delay
G0 Helicity Pattern : Quartet
G0 Helicity Cycle Rate Read : 30 Hz
-----
Target : L1 6cm
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 3.13948e+07
Target type : 3.13948e+07
temperature loop 1(1) : 119.99
temperature loop 1(2) : 119.99
temperature loop 1(3) : 119.99
Heat exchange loop 1 H2 : 271.7
temperature loop 3(1) : 99.99
temperature loop 3(2) : 99.99
temperature loop 3(3) : 99.99
Heat exchange loop 3 H2 : 291
pressure loop He : 39.9043
pressure loop H2 before : 19.5575
pressure loop H2 return : 20.0702
HPH He loop 1 : 0.0970926
----
SLI data valid? : No
SLI horiz size mm : 0
SLI Energy spread *10^5 : 0
SLI x position : 2.69814
SLI vert. size mm : 0
SLI y position : 1.61502
-----
FPP High Voltages and Currents at Fri May 9 17:45:33 EDT 2008
MF7b1469_7gn0gen.F 22.9
MF7b1469_7gn0gen.E -9.2
MF7b1469_7gn0ch0property.F 22.9
MF7b1469_7gn0ch0property.E -0
MF7b1469_7gn0ch1property.F 22.9
MF7b1469_7gn0ch1property.E -0
MF7b1469_7gn0ch2property.F 22.9
MF7b1469_7gn0ch2property.E -0
MF7b1469_7gn0ch3property.F 22.9
MF7b1469_7gn0ch3property.E 0.01
MF7b1469_7gn0ch4property.F 22.9
MF7b1469_7gn0ch4property.E -0.01
MF7b1469_7gn1gen.F 23.5
MF7b1469_7gn1gen.E -0.1
MF7b1469_7gn1ch0property.F 0
MF7b1469_7gn1ch0property.E -0.01
MF7b1469_7gn1ch1property.F 0
MF7b1469_7gn1ch1property.E -0
MF7b1469_7gn1ch2property.F 0
MF7b1469_7gn1ch2property.E -0.01
MF7b1469_7gn1ch3property.F 0
MF7b1469_7gn1ch3property.E -0.01
MF7b1469_7gn1ch4property.F 0
MF7b1469_7gn1ch4property.E 0
MF7b1469_8gn0gen.F 23.5
MF7b1469_8gn0gen.E -0.2
MF7b1469_8gn0ch0property.F 0
MF7b1469_8gn0ch0property.E -0.04
MF7b1469_8gn0ch1property.F 0
MF7b1469_8gn0ch1property.E -0
MF7b1469_8gn0ch2property.F 0
MF7b1469_8gn0ch2property.E -0.02
MF7b1469_8gn0ch3property.F 0
MF7b1469_8gn0ch3property.E -0
MF7b1469_8gn0ch4property.F 0
MF7b1469_8gn0ch4property.E -0.01
MF7b1469_8gn1gen.F 19.6
MF7b1469_8gn1gen.E -0.3
MF7b1469_8gn1ch0property.F 0
MF7b1469_8gn1ch0property.E -0
MF7b1469_8gn1ch1property.F 0
MF7b1469_8gn1ch1property.E -0.01
MF7b1469_8gn1ch2property.F 0
MF7b1469_8gn1ch2property.E -0.02
MF7b1469_8gn1ch3property.F 0
MF7b1469_8gn1ch3property.E -0.02
MF7b1469_8gn1ch4property.F 0
MF7b1469_8gn1ch4property.E -0.01
MF7b1469_8gn2gen.F 23.4
MF7b1469_8gn2gen.E 0
MF7b1469_8gn2ch0property.F 0
MF7b1469_8gn2ch0property.E 0
FPP Chamber Threshold voltages at Fri May 9 17:45:35 EDT 2008
HrsH_FPP_TH1 3.89844
HrsH_FPP_TH2 4.02979
HrsH_FPP_TH3 6.95947
HrsH_FPP_TH4 7.06348
FPP Wire Chambers Low Voltage at Fri May 9 17:45:36 EDT 2008
HrsH_FPP_LV11P 4.92383
HrsH_FPP_LV11M -5.33105
HrsH_FPP_LV12MA -5.28857
HrsH_FPP_LV12MB -5.5835
HrsH_FPP_LV21P 5.18213
HrsH_FPP_LV21M -4.53955
HrsH_FPP_LV22MA -4.71631
HrsH_FPP_LV22MB -4.74463
HrsH_FPP_LV31P 4.87109
HrsH_FPP_LV31M -5.05762
HrsH_FPP_LV32MA -5.06689
HrsH_FPP_LV32MB -4.9248
HrsH_FPP_LV42P 4.73389
HrsH_FPP_LV42MA -4.73975
HrsH_FPP_LV42MB -4.61182
HrsH_FPP_LV41P 4.64355
HrsH_FPP_LV41MA -4.80664
HrsH_FPP_LV41MB -4.66113
FPP Level Shifters at Fri May 9 17:45:36 EDT 2008
HacH_DTC_HPE1313A:0_Ch48 5.06836
HacH_DTC_HPE1313A:0_Ch50 -5.11523
FPP Gas Flow at Fri May 9 17:45:36 EDT 2008
HrsH_GAS_rFPPc1 4.46085
HrsH_GAS_rFPPc2 1.74278
HrsH_GAS_rFPPc3 5.52974
HrsH_GAS_rFPPc4 5.90974
Left S2 HV
S2 Slot0 ch0 : -2311
S2 Slot0 ch1 : -2212.3
S2 Slot0 ch2 : -2166.4
S2 Slot0 ch3 : -2231.2
S2 Slot0 ch4 : -1793.8
S2 Slot0 ch5 : -2165.8
S2 Slot0 ch6 : -1940.7
S2 Slot0 ch7 : -1876.9
S2 Slot0 ch8 : -2030.4
S2 Slot0 ch9 : -1889.6
S2 Slot0 ch10 : -2094.7
S2 Slot0 ch11 : -1867.9
-----
Left S1 HV
S1 Slot1 ch0 : -1785.2
S1 Slot1 ch1 : -1809.8
S1 Slot1 ch2 : -1790.2
S1 Slot1 ch3 : -1817.7
S1 Slot1 ch4 : -1699.9
S1 Slot1 ch5 : -1855.4
S1 Slot1 ch6 : -1915.4
S1 Slot1 ch7 : -1700.9
S1 Slot1 ch8 : -1961.1
S1 Slot1 ch9 : -1746.3
S1 Slot1 ch10 : -1798.4
S1 Slot1 ch11 : -1707.6
-----
Left Cerenkov HV
GCER Slot2 ch0 : -1543.5
GCER Slot2 ch1 : -1462.1
GCER Slot2 ch2 : -1528
GCER Slot2 ch3 : -1453
GCER Slot2 ch4 : -1798.1
GCER Slot2 ch5 : -1983.6
GCER Slot2 ch6 : -1750.5
GCER Slot2 ch7 : -1751.9
GCER Slot2 ch8 : -2009.9
GCER Slot2 ch9 : -1588.6
GCER Slot2 ch10 : -15
GCER Slot2 ch11 : -23.6
-----
Left Pion Rejector Layer 1 HV
PRL1 Slot3 ch0 : -860.4
PRL1 Slot3 ch1 : -784.5
PRL1 Slot3 ch2 : -905.8
PRL1 Slot3 ch3 : -981.2
PRL1 Slot3 ch4 : -731.1
PRL1 Slot3 ch5 : -811
PRL1 Slot3 ch6 : -1081.3
PRL1 Slot3 ch7 : -990.8
PRL1 Slot3 ch8 : -810.5
PRL1 Slot3 ch9 : -790.9
PRL1 Slot3 ch10 : -829.5
PRL1 Slot3 ch11 : -785.3
PRL1 Slot4 ch0 : -870.8
PRL1 Slot4 ch1 : -900.5
PRL1 Slot4 ch2 : -750
PRL1 Slot4 ch3 : -895.9
PRL1 Slot4 ch4 : -921.7
PRL1 Slot4 ch5 : -821.2
PRL1 Slot4 ch6 : -836
PRL1 Slot4 ch7 : -826.4
PRL1 Slot4 ch8 : -1190.3
PRL1 Slot4 ch9 : -991.4
PRL1 Slot4 ch10 : -1030.9
PRL1 Slot4 ch11 : -861.4
PRL1 Slot5 ch0 : -1041.1
PRL1 Slot5 ch1 : -871
PRL1 Slot5 ch2 : -916.2
PRL1 Slot5 ch3 : -735.8
PRL1 Slot5 ch4 : -890.7
PRL1 Slot5 ch5 : -810.3
PRL1 Slot5 ch6 : -821.1
PRL1 Slot5 ch7 : -895.6
PRL1 Slot5 ch8 : -741.3
PRL1 Slot5 ch9 : -841.4
PRL1 Slot5 ch10 : -16.5
PRL1 Slot5 ch11 : -25.6
-----
Left Pion Rejector Layer 2 HV
PRL2 Slot9 ch0 : -920.5
PRL2 Slot9 ch1 : -881.3
PRL2 Slot9 ch2 : -800.1
PRL2 Slot9 ch3 : -869.9
PRL2 Slot9 ch4 : -810.9
PRL2 Slot9 ch5 : -941.5
PRL2 Slot9 ch6 : -851.5
PRL2 Slot9 ch7 : -890.6
PRL2 Slot9 ch8 : -811.4
PRL2 Slot9 ch9 : -780.6
PRL2 Slot9 ch10 : -821
PRL2 Slot9 ch11 : -851.4
PRL2 Slot10 ch0 : -755.7
PRL2 Slot10 ch1 : -812.4
PRL2 Slot10 ch2 : -871
PRL2 Slot10 ch3 : -900.8
PRL2 Slot10 ch4 : -881.4
PRL2 Slot10 ch5 : -871
PRL2 Slot10 ch6 : -815.2
PRL2 Slot10 ch7 : -824.8
PRL2 Slot10 ch8 : -760.3
PRL2 Slot10 ch9 : -715
PRL2 Slot10 ch10 : -911
PRL2 Slot10 ch11 : -781.3
PRL2 Slot11 ch0 : -1000.7
PRL2 Slot11 ch1 : -900.4
PRL2 Slot11 ch2 : -850.6
PRL2 Slot11 ch3 : -1079.9
PRL2 Slot11 ch4 : -1050.2
PRL2 Slot11 ch5 : -800
PRL2 Slot11 ch6 : -860.4
PRL2 Slot11 ch7 : -1031.3
PRL2 Slot11 ch8 : -911.3
PRL2 Slot11 ch9 : -880.3
PRL2 Slot11 ch10 : -12.9
PRL2 Slot11 ch11 : -24.7
-----
# Map Error Measured Voltage
*** Error - Detector name -D Error is unknown
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - adev for NA and adaql1 for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error in information retrieval in -D Error -c GET -P MV
# Map Error Measured Current
*** Error - Detector name -D Error is unknown
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - adev for NA and adaql1 for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error in information retrieval in -D Error -c GET -P MC
BigBite thresholds E dE(tdc) dE(trigger)
Wed May 7 16:11:49 EDT 2008 375 140 280