NEXT
User name a-onl
Log entry time 16:48:33 on May 12, 2008
Entry number 237893
keyword=Start_Run_1025,Run_type=Test,target_type=Loop 1 LH2 6 cm,beam_e0=2.323,beam_raster=off,leftarm_p=1.938,leftarm_theta=18.2,leftarm_colli=out,bbarm_i=390,bbarm_theta=54.,bbarm_colli=out,comment_text=cosmic test
Run Timestamp: Mon May 12 16:47:40 EDT 2008
Beginning-of-run EPICS data for Run Number 1025 at Mon May 12 16:47:43 EDT 2008
Run_type=Test
target_type=Loop 1 LH2 6 cm
beam_e0=2.323
beam_raster=off
leftarm_p=1.938
leftarm_theta=18.2
leftarm_colli=out
bbarm_i=390
bbarm_theta=54.
bbarm_colli=out
comment_text=cosmic test
; BBite+HRS DAQ on adaql2/a-onl account
; Prescale factors (integer), downloaded each run at prestart.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; Change this file only in-between runs.
; Maxima: (2^24)-1 = 16777215 for T1-T4 and 65535 for T5-T8
; The default factor is essentially infinite.
; T1 = BigBite E-plane
; T2 = BigBite dE-plane
; T3 = L-HRS Singles
; T4 = L-HRS Efficiency
; T5 = T1.AND.T7
; T6 = T2.AND.T7
; T7 = L-HRS Singles (center S1 paddles.AND.S2)
; T8 = 1024 Hz pulser
; String should be one line, no spaces, ending in carriage return
;ps1=120000,ps2=120000,ps3=870,ps4=34,ps5=1,ps6=65,ps7=1,ps8=10
ps1=16777215,ps2=16777215,ps3=1,ps4=16777215,ps5=65535,ps6=65535,ps7=1,ps8=100
Left Arm Q1 momentum : 0.000780749
Left Arm Q1 power supply : 0
Left Arm Q1 gauss meter : 0.0002591
Left Arm Q2 power supply current : 0.0106698
Left Arm Q2 momentum : 0.00281592
Left Arm Q2 gauss meter : 0.0007922
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : -1.38168
Left Arm D1 momentum : 0.00339142
Left Arm D1 NMR : 0.351698
Left Arm Q3 power supply current : -0.00641343
Left Arm Q3 momentum : -1.69219e-05
Left Arm Q3 gauss meter : -7.87e-05
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.0012138
-----
Right Arm Q1 momentum : 0.00116119
Right Arm Q1 power supply : 0
Right Arm Q1 gauss meter : 1.9e-06
Right Arm Q2 power supply current : 0.000443687
Right Arm Q2 momentum : 0.00286175
Right Arm Q2 gauss meter : 0.0006275
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 1.86954
Right Arm D1 momentum : 0.00634999
Right Arm D1 NMR : 0.428617
Right Arm Q3 power supply current : -0.000377367
Right Arm Q3 momentum : -9.48375e-07
Right Arm Q3 gauss meter : 3.42e-05
Right Arm Q3 power supply polarity : enabled
Right Arm B Field Hall Probe (D-G) : -0.002327
-----
BigBite magnet current setpoint : 0
BigBite magnet current readback : 0
BigBite Gaussmeter readback : -0.0003976
-----
Left Arm Top VDC Current : 1.12305
Left Arm Bottom VDC Current : 1.12305
Left Arm Top VDC voltage : 0.0151367
Left Arm Bottom VDC voltage : 0.0161133
-----
Right Arm Top VDC Current : -1.07422
Right Arm Bottom VDC Current : -3.71094
Right Arm Top VDC voltage : -0.0107422
Right Arm Bottom VDC voltage : 4.00684
-----
Average current of the two cavities : hac_bcm_average --- Invalid channel name
Current on Unser monitor : hac_unser_current --- Invalid channel name
Current on Upstream bcm : hac_bcm_dvm1_current --- Invalid channel name
Current on Downstream bcm : hac_bcm_dvm2_current --- Invalid channel name
Upstream Cavity Coefficient : hac_bcm_A1 --- Invalid channel name
Downstream Cavity Coefficient : hac_bcm_A2 --- Invalid channel name
Current on IBC0L02 (source) : 55.5964
Hall C Current : ibcm1 --- Invalid channel name
Hall A momentum (Tiefenbach) (HALLA:p) : 2322.79
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 2323.56
Hall A energy (halla_MeV) : 2322.79
Hall C energy (hallc_MeV) : 5710.53
Delta(E)/E width (MV_AI_DXWID) : 1.10324
MBSY1c magnet current (amp) : 0.0377198
MBSY1c Bdl : 580381
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 1
Raster Y width : 1
-----
Left Arm Collimator : 0.871387
HacL_HPE1313A:0_Ch58 : -0.300781
HacL_HPE1313A:0_Ch55 : 24.0234
HacL_HPE1313A:0_Ch54 : -0.414062
Left Arm Angle Floor Angle : 0
Left Arm Angle Vernier : 0
Left Arm Scattering Angle : -0.179
-----
Right Arm Arm Collimator : -0.00839844
HacR_HPE1313A:0_Ch58 : -0.564453
HacR_HPE1313A:0_Ch55 : 22.8027
HacR_HPE1313A:0_Ch54 : -0.986816
Right Arm Angle Floor Angle : 105
Right Arm Angle Vernier : -34.5
Right Arm Scattering Angle : 104.998
-----
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
-----
Wien angle : -33.7301
Helicity Mode ON/OFF Random/Toggle : OFF
Wien field : 22.411
Laser attenuation Hall A : 140
Laser power Hall A : 100
Half-wave plate (off=out) : IN
rotating waveplate : 0
Beam Half-wave plate (off=out) : IN
-----
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : No Delay
G0 Helicity Pattern Set : Quartet
G0 Helicity Cycle Rate Set : 30 Hz
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : No Delay
G0 Helicity Pattern : Quartet
G0 Helicity Cycle Rate Read : 30 Hz
-----
Target : L1 6cm
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 3.13948e+07
Target type : 3.13948e+07
temperature loop 1(1) : 119.99
temperature loop 1(2) : 119.99
temperature loop 1(3) : 119.99
Heat exchange loop 1 H2 : 283.1
temperature loop 3(1) : 99.99
temperature loop 3(2) : 99.99
temperature loop 3(3) : 99.99
Heat exchange loop 3 H2 : 296.3
pressure loop He : 40.696
pressure loop H2 before : 18.5367
pressure loop H2 return : 18.9273
HPH He loop 1 : 0.0669839
HPH H2 loop 3 : 0.00634721
----
SLI data valid? : No
SLI horiz size mm : 0
SLI Energy spread *10^5 : 0
SLI x position : 2.32547
SLI vert. size mm : 0
SLI y position : 2.35869
-----
FPP High Voltages and Currents at Mon May 12 16:48:24 EDT 2008
MF7b1469_7gn0gen.F 1769.8
MF7b1469_7gn0gen.E 1.3
MF7b1469_7gn0ch0property.F 1769.8
MF7b1469_7gn0ch0property.E 0.02
MF7b1469_7gn0ch1property.F 1769.8
MF7b1469_7gn0ch1property.E 0.04
MF7b1469_7gn0ch2property.F 1769.8
MF7b1469_7gn0ch2property.E 0.01
MF7b1469_7gn0ch3property.F 1769.8
MF7b1469_7gn0ch3property.E 0.04
MF7b1469_7gn0ch4property.F 1769.8
MF7b1469_7gn0ch4property.E 0.04
MF7b1469_7gn1gen.F 1770.1
MF7b1469_7gn1gen.E 1.5
MF7b1469_7gn1ch0property.F 1770.1
MF7b1469_7gn1ch0property.E 0.42
MF7b1469_7gn1ch1property.F 1770.1
MF7b1469_7gn1ch1property.E 0.02
MF7b1469_7gn1ch2property.F 1770.1
MF7b1469_7gn1ch2property.E 0
MF7b1469_7gn1ch3property.F 1770.1
MF7b1469_7gn1ch3property.E 0.01
MF7b1469_7gn1ch4property.F 1770.1
MF7b1469_7gn1ch4property.E 0.11
MF7b1469_8gn0gen.F 1770
MF7b1469_8gn0gen.E 1.6
MF7b1469_8gn0ch0property.F 1770
MF7b1469_8gn0ch0property.E -0.02
MF7b1469_8gn0ch1property.F 1770
MF7b1469_8gn0ch1property.E -0
MF7b1469_8gn0ch2property.F 1770
MF7b1469_8gn0ch2property.E 0
MF7b1469_8gn0ch3property.F 1770
MF7b1469_8gn0ch3property.E 0.01
MF7b1469_8gn0ch4property.F 1770
MF7b1469_8gn0ch4property.E -0.01
MF7b1469_8gn1gen.F 1769.3
MF7b1469_8gn1gen.E 2.2
MF7b1469_8gn1ch0property.F 1769.3
MF7b1469_8gn1ch0property.E -0
MF7b1469_8gn1ch1property.F 1769.3
MF7b1469_8gn1ch1property.E -0.01
MF7b1469_8gn1ch2property.F 1769.3
MF7b1469_8gn1ch2property.E 0
MF7b1469_8gn1ch3property.F 1769.3
MF7b1469_8gn1ch3property.E -0
MF7b1469_8gn1ch4property.F 1769.3
MF7b1469_8gn1ch4property.E 0.01
MF7b1469_8gn2gen.F 23.4
MF7b1469_8gn2gen.E 0
MF7b1469_8gn2ch0property.F 0
MF7b1469_8gn2ch0property.E 0
FPP Chamber Threshold voltages at Mon May 12 16:48:26 EDT 2008
HrsH_FPP_TH1 3.89893
HrsH_FPP_TH2 4.02344
HrsH_FPP_TH3 6.95752
HrsH_FPP_TH4 7.06104
FPP Wire Chambers Low Voltage at Mon May 12 16:48:26 EDT 2008
HrsH_FPP_LV11P 4.92578
HrsH_FPP_LV11M -5.25781
HrsH_FPP_LV12MA -5.22412
HrsH_FPP_LV12MB -5.5835
HrsH_FPP_LV21P 5.17773
HrsH_FPP_LV21M -4.55469
HrsH_FPP_LV22MA -4.71094
HrsH_FPP_LV22MB -4.75537
HrsH_FPP_LV31P 4.86816
HrsH_FPP_LV31M -5.05811
HrsH_FPP_LV32MA -5.07324
HrsH_FPP_LV32MB -4.91064
HrsH_FPP_LV42P 4.729
HrsH_FPP_LV42MA -4.73682
HrsH_FPP_LV42MB -4.60498
HrsH_FPP_LV41P 4.65771
HrsH_FPP_LV41MA -4.80566
HrsH_FPP_LV41MB -4.65039
FPP Level Shifters at Mon May 12 16:48:27 EDT 2008
HacH_DTC_HPE1313A:0_Ch48 5.06934
HacH_DTC_HPE1313A:0_Ch50 -5.11523
FPP Gas Flow at Mon May 12 16:48:27 EDT 2008
HrsH_GAS_rFPPc1 5.48574
HrsH_GAS_rFPPc2 2.98295
HrsH_GAS_rFPPc3 5.48949
HrsH_GAS_rFPPc4 5.8957
Left S2 HV
S2 Slot0 ch0 : -2311
S2 Slot0 ch1 : -2212.3
S2 Slot0 ch2 : -2166.4
S2 Slot0 ch3 : -2231.2
S2 Slot0 ch4 : -1793.8
S2 Slot0 ch5 : -2166.5
S2 Slot0 ch6 : -1940.7
S2 Slot0 ch7 : -1877.7
S2 Slot0 ch8 : -2030.4
S2 Slot0 ch9 : -1889.6
S2 Slot0 ch10 : -2094.7
S2 Slot0 ch11 : -1867.9
-----
Left S1 HV
S1 Slot1 ch0 : -1785.2
S1 Slot1 ch1 : -1809.8
S1 Slot1 ch2 : -1790.2
S1 Slot1 ch3 : -1817.7
S1 Slot1 ch4 : -1699.9
S1 Slot1 ch5 : -1855.4
S1 Slot1 ch6 : -1915.4
S1 Slot1 ch7 : -1700.9
S1 Slot1 ch8 : -1961.1
S1 Slot1 ch9 : -1746.3
S1 Slot1 ch10 : -1798.4
S1 Slot1 ch11 : -1707.6
-----
Left Cerenkov HV
GCER Slot2 ch0 : -1544.3
GCER Slot2 ch1 : -1462.1
GCER Slot2 ch2 : -1528.8
GCER Slot2 ch3 : -1453
GCER Slot2 ch4 : -1798.1
GCER Slot2 ch5 : -1983.6
GCER Slot2 ch6 : -1750.5
GCER Slot2 ch7 : -1751.9
GCER Slot2 ch8 : -2009.9
GCER Slot2 ch9 : -1587.9
GCER Slot2 ch10 : -15
GCER Slot2 ch11 : -23.6
-----
Left Pion Rejector Layer 1 HV
PRL1 Slot3 ch0 : -860.4
PRL1 Slot3 ch1 : -784.5
PRL1 Slot3 ch2 : -905.8
PRL1 Slot3 ch3 : -981.2
PRL1 Slot3 ch4 : -731.1
PRL1 Slot3 ch5 : -811
PRL1 Slot3 ch6 : -1081.3
PRL1 Slot3 ch7 : -990.8
PRL1 Slot3 ch8 : -811.2
PRL1 Slot3 ch9 : -790.9
PRL1 Slot3 ch10 : -829.5
PRL1 Slot3 ch11 : -785.3
PRL1 Slot4 ch0 : -870.8
PRL1 Slot4 ch1 : -900.5
PRL1 Slot4 ch2 : -750
PRL1 Slot4 ch3 : -895.1
PRL1 Slot4 ch4 : -921.7
PRL1 Slot4 ch5 : -821.2
PRL1 Slot4 ch6 : -836
PRL1 Slot4 ch7 : -826.4
PRL1 Slot4 ch8 : -1190.3
PRL1 Slot4 ch9 : -991.4
PRL1 Slot4 ch10 : -1030.9
PRL1 Slot4 ch11 : -861.4
PRL1 Slot5 ch0 : -1041.1
PRL1 Slot5 ch1 : -871
PRL1 Slot5 ch2 : -916.2
PRL1 Slot5 ch3 : -735.8
PRL1 Slot5 ch4 : -890.7
PRL1 Slot5 ch5 : -810.3
PRL1 Slot5 ch6 : -821.1
PRL1 Slot5 ch7 : -895.6
PRL1 Slot5 ch8 : -741.3
PRL1 Slot5 ch9 : -841.4
PRL1 Slot5 ch10 : -16.5
PRL1 Slot5 ch11 : -25.6
-----
Left Pion Rejector Layer 2 HV
PRL2 Slot9 ch0 : -920.5
PRL2 Slot9 ch1 : -881.3
PRL2 Slot9 ch2 : -800.1
PRL2 Slot9 ch3 : -869.9
PRL2 Slot9 ch4 : -810.9
PRL2 Slot9 ch5 : -941.5
PRL2 Slot9 ch6 : -851.5
PRL2 Slot9 ch7 : -890.6
PRL2 Slot9 ch8 : -811.4
PRL2 Slot9 ch9 : -780.6
PRL2 Slot9 ch10 : -821
PRL2 Slot9 ch11 : -851.4
PRL2 Slot10 ch0 : -755.7
PRL2 Slot10 ch1 : -812.4
PRL2 Slot10 ch2 : -871
PRL2 Slot10 ch3 : -900.8
PRL2 Slot10 ch4 : -881.4
PRL2 Slot10 ch5 : -871
PRL2 Slot10 ch6 : -815.2
PRL2 Slot10 ch7 : -824.8
PRL2 Slot10 ch8 : -760.3
PRL2 Slot10 ch9 : -715.7
PRL2 Slot10 ch10 : -911
PRL2 Slot10 ch11 : -781.3
PRL2 Slot11 ch0 : -1000.7
PRL2 Slot11 ch1 : -900.4
PRL2 Slot11 ch2 : -850.6
PRL2 Slot11 ch3 : -1079.9
PRL2 Slot11 ch4 : -1050.2
PRL2 Slot11 ch5 : -800
PRL2 Slot11 ch6 : -860.4
PRL2 Slot11 ch7 : -1031.3
PRL2 Slot11 ch8 : -911.3
PRL2 Slot11 ch9 : -880.3
PRL2 Slot11 ch10 : -12.9
PRL2 Slot11 ch11 : -24.7
-----
# Map Error Measured Voltage
*** Error - Detector name -D Error is unknown
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - adev for NA and adaql1 for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error in information retrieval in -D Error -c GET -P MV
# Map Error Measured Current
*** Error - Detector name -D Error is unknown
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - adev for NA and adaql1 for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error in information retrieval in -D Error -c GET -P MC
BigBite thresholds E dE(tdc) dE(trigger)
Wed May 7 16:11:49 EDT 2008 375 140 280
Threshold for 'mwdc_back' is -0.147 V (2028)
USAGE: ./threshold
-g|--get|get Get threshold for
-s|--set|set Set threshold for to
-v Verbose.
-h This help text.
is a voltage in units of mV or V
is from table below
name Channel Range Description
----- ------- ------- -----------
BB_Cer 7 -1V -- 0V BB Cerenkov Threshold
BB_PSh 6 -1V -- 0V BB Preshower Threshold
BB_Sh 5 -1V -- 0V BB Shower Threshold
mwdc_back 2 0V -- +15V Back MWDC Threshold
Using controller IP: bbcamac1.jlab.org. I/O reg in slot 12
Using cnaf command: './cnafb'
Examples:
./threshold -g mwdc_back
---> Return thresh for mwdc_back
./threshold -s BB_Sh -200
---> Set thresh for BB_Sh to -200 mV
./threshold -s mwdc_back 100mV
---> Set thresh for mwdc_back to 100 mV
./threshold -s mwdc_back 1.0V
---> Set thresh for mwdc_back to 1.0 V