• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name adev

    Log entry time 12:31:12 on October 28, 2008

    Entry number 245149

    keyword=BigBite WireChamber Measured Voltage change!


    Autologged by ./monitor.pl (Xin Qian)

    Chamber: 2, Channel: 4, Current_Vol: -1620 , *** Map name 4,2 is missing or not properly set in the server list : select:exit by timeout(180 sec) Error receive message: err: -1, 1620



    Chamber 1 Field plane, Top: Voltage: -1600 V Current: -0 uA Enable: 1 Status: 1
    Field plane, Bottom: Voltage: -1600 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Front: Voltage: -1627 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Back: Voltage: -1620 V Current: -0 uA Enable: 1 Status: 1
    Chamber 2 Field plane, Top: Voltage: -1607 V Current: -0 uA Enable: 1 Status: 1
    Field plane, Bottom: Voltage: -1606 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Front: Voltage: -1627 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Back: Voltage: -1620 V Current: -0 uA Enable: 1 Status: 1
    Chamber 3 Field plane, Top: Voltage: -1600 V Current: -0 uA Enable: 1 Status: 1
    Field plane, Bottom: Voltage: -1601 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Front: Voltage: -1614 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Back: Voltage: -1612 V Current: -0 uA Enable: 1 Status: 1



    Chamber 1 prev
    Field plane, Top: Voltage: -1600 V Current: -0 uA Enable: 1 Status: 1
    Field plane, Bottom: Voltage: -1600 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Front: Voltage: -1626 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Back: Voltage: -1620 V Current: -0 uA Enable: 1 Status: 1
    Chamber 2 prev
    Field plane, Top: Voltage: -1606 V Current: -0 uA Enable: 1 Status: 1
    Field plane, Bottom: Voltage: -1606 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Front: Voltage: -1628 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Back: Voltage: *** Map name 4,2 is missing or not properly set in the server list : select:exit by timeout(180 sec) Error receive message: err: -1 V Current: -0 uA Enable: 1 Status: 1
    Chamber 3 prev
    Field plane, Top: Voltage: -1600 V Current: -0 uA Enable: 1 Status: 1
    Field plane, Bottom: Voltage: -1601 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Front: Voltage: -1613 V Current: -0 uA Enable: 1 Status: 1
    Cathod plane, Back: Voltage: -1612 V Current: uA Enable: 1 Status: 1



    Threshold
    Threshold for 'mwdc_front' is +3.503 V (2526)
    Threshold for 'mwdc_middle' is +3.503 V (2526)
    Threshold for 'mwdc_back' is +3.503 V (2526)