NEXT
Make New Entry,
Make Followup Entry
User name a-onl
Log entry time 16:15:48 on November 4, 2008
Entry number 246683
keyword=Start_Run_2813,Run_type=Cosmics,target_type=No Target,beam_e0=1.23060,beam_raster=on,leftarm_p=0.85,leftarm_theta=16,leftarm_sieve=out,bbarm_i=710,bbarm_theta=30,bbarm_sieve=out,bbarm_zoff=0,comment_text=pulser pedestal test with T8
Run Timestamp: Tue Nov 4 16:15:11 EST 2008
Beginning-of-run EPICS data for Run Number 2813 at Tue Nov 4 16:15:26 EST 2008
Run_type=Cosmics
target_type=No Target
beam_e0=1.23060
beam_raster=on
leftarm_p=0.85
leftarm_theta=16
leftarm_sieve=out
bbarm_i=710
bbarm_theta=30
bbarm_sieve=out
bbarm_zoff=0
comment_text=pulser pedestal test with T8
; BBite+HRS DAQ on adaql2/a-onl account
; Prescale factors (integer), downloaded each run at prestart.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; Change this file only in-between runs.
; Maxima: (2^24)-1 = 16777215 for T1-T4 and 65535 for T5-T8
; The default factor is essentially infinite.
; T1 = BigBite Total shower
; T2 = BigBite Total shower + Cerenkov overlap
; T3 = L-HRS Singles (S1.and.S2)
; T4 = L-HRS Efficiency (S1.or.S2)
; T5 = T1.AND.T3 (BigBite LHRS Coincidence)
; T6 = BigBite Total shower 2nd trigger
; T7 = BigBite Cerenkov only
; T8 = 1024 Hz pulser
; T9 = BigBite cosmics(front-back)
; T10 = BigBite cosmics(top-down)
; String should be one line, no spaces, ending in carriage return
; WE WANT AT LEAST 10HZ OF T8 IN EVERY RUN
ps1=65535,ps2=65535,ps3=65535,ps4=65535,ps5=65535,ps6=65535,ps7=65535,ps8=4
Left Arm Q1 momentum : 0.849869
Left Arm Q1 power supply : 639.33
Left Arm Q1 gauss meter : -0.05427
Left Arm Q2 power supply current : 366.025
Left Arm Q2 momentum : 0.850036
Left Arm Q2 gauss meter : 0.19303
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 282.051
Left Arm D1 momentum : 0.850006
Left Arm D1 NMR : 0.314736
Left Arm Q3 power supply current : 338.371
Left Arm Q3 momentum : 0.849924
Left Arm Q3 gauss meter : -0.171278
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.3035
-----
BigBite magnet current setpoint : 710
BigBite magnet current readback : 706.569
BigBite Gaussmeter readback : 1.2141
-----
Left Arm Top VDC Current : -2.00195
Left Arm Bottom VDC Current : 0
Left Arm Top VDC voltage : 4.00732
Left Arm Bottom VDC voltage : 4.00586
-----
RICH Vmon 16 : 2202.6
RICH Imon 16 : 0.04
RICH Vmon 17 : 200.6
RICH Imon 17 : 0
RICH Radiator Oxygen : -1.66016
RICH Radiator Moisture : 441.211
RICH Radiator Pressure : 9.96582
RICH Condensor temperature : -8.79102
RICH Gas Oxygen : 7.91016
RICH Gas Moisture : 18.457
RICH Argon Flow : -0.292969
RICH Methane Flow : 1551.27
RICH A Volts : 3.75732
RICH B Volts : 3.92334
-----
Average current of the two cavities : 0.0326232
Current on Unser monitor : -7.7481
Current on Upstream bcm : 0.0513911
Current on Downstream bcm : 0.0138554
Upstream Cavity Coefficient : 43.377
Downstream Cavity Coefficient : 42.913
Current on IBC0L02 (source) : 0.00330085
Hall C Current : 2.87943
Hall A momentum (Tiefenbach) (HALLA:p) : 1230.6
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 1232.64
Hall A energy (halla_MeV) : 1230.6
Hall C energy (hallc_MeV) : 2397.82
Delta(E)/E width (MV_AI_DXWID) : 4.39004
MBSY1c magnet current (amp) : 1.33514e-05
MBSY1c Bdl : 307332
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 4
Raster Y width : 4
-----
HacL_HPE1313A:0_Ch58 : -0.184082
HacL_HPE1313A:0_Ch55 : 23.4863
HacL_HPE1313A:0_Ch54 : 0.0913086
Left Arm Angle Floor Angle : 16
Left Arm Angle Vernier : 31.5
Left Arm Scattering Angle : 16.0026
Left VDC -DISC LVL Top : 3.89746
Left VDC -DISC LVL Bottom : 3.96387
Left VDC -DISC LVL Voltage1 : 4.97119
Left VDC -DISC LVL Voltage2 : -5.06152
-----
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
-----
Wien angle : 0.195965
Helicity Mode ON/OFF Random/Toggle : OFF
Wien field : 0
Laser attenuation Hall A : 75
Laser power Hall A : 100
Half-wave plate (off=out) : IN
rotating waveplate : 0
Beam Half-wave plate (off=out) : IN
-----
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : No Delay
G0 Helicity Pattern : Quartet
G0 Helicity Cycle Rate Read : 30 Hz
-----
RTD1 (upstream) : 21.4355
RTD2 : 21.5527
RTD3 : 21.4062
RTD4 : 21.7676
RTD5 (downstream) : 21.3086
RTD6 (pump cell up) : 21.0938
RTD7 (pump cell down) : 21.3281
HacAi_hpchan7: Temp at Ref. Cell : 21.5918
HacAi_hpchan8: Temp at Ref. Cell : 21.4746
HacAi_hpchan9: Temp at Ref. Cell : 21.5723
Reference Cell Gas Pressure (psi) : -109.837
Reference Cell System Vacuum (Torr) : -17.1125
Cooling Jets Flow Rate : 404.279
Target position : 0
Oven Air Flow : 20.8
-----
HaGenTargBrake : enabled
HaGenTargBrake : enabled
HacOMEGA_AL1 : 0
HacOMEGA_READ : 020.8
HacOMEGA_SP1 : 10
HacOMEGA_PROP1 : 1000
HacOMEGA_RST1 : 100
HacOMEGA_RATE : 1
-----
CLASER_STATE_MB : Disabled
CLASER_RDCUR : 35
CLASER_TEMP : 14
-----
CLASER2_STATE_MB : Disabled
CLASER2_RDCUR : 0
CLASER2_TEMP : 0
-----
CLASERAB_STATE_MB : Disabled
CLASERAB_GETCUR0 : 0
CLASERAB_GETCUR1 : 0
CLASERAB_GETTEMP0 : 0
CLASERAB_GETTEMP1 : 0
-----
CLASER3_STATE_MB : Disabled
CLASER3_RDCUR : 20
CLASER3_TEMP : 23
-----
CLASER4_STATE_MB : Disabled
CLASER4_RDCUR : 32
CLASER4_TEMP : 15
-----
CLASER5_STATE_MB : Disabled
CLASER5_RDCUR : 27
CLASER5_TEMP : 21
-----
CLASER6_STATE_MB : Disabled
CLASER6_RDCUR : 35
CLASER6_TEMP : 11
-----
CLASERAB2_STATE_M : Disabled
CLASERAB2_GETCUR0 : 0
CLASERAB2_GETCUR1 : 0
CLASERAB2_GETTEMP0 : 0
CLASERAB2_GETTEMP1 : 0
----
CLASERAB3_STATE_M : Disabled
CLASERAB3_GETCUR0 : 0
CLASERAB3_GETCUR1 : 0
CLASERAB3_GETTEMP0 : 0
CLASERAB3_GETTEMP1 : 0
----
haPolHe3_Spin_State : 0
haPolHe3_Flip_Sequence_ID : 0
haPolHe3_Flip_Count : 0
haPolHe3_EPR_ID : 0
haPolHe3_EPR_POL : 0
haPolHe3_Last_Flip_Start : 0.000000000000000e+00
haPolHe3_Last_Flip_End : 0.000000000000000e+00
haPolHe3_FLIP_NMR_PHASE : 0
haPolHe3_FLIP_NMR_Mag : 0
haPolHe3_FLIP_NMR_Pol : 0
HaGenTargSpin1 : disabled
HaGenTargSpin2 : disabled
----
SLI data valid? : No
SLI horiz size mm : 0
SLI Energy spread *10^5 : 0
SLI x position : 0
SLI vert. size mm : 0
SLI y position : 0
-----
Left S2 HV Left PMTs
S2 Slot0 ch0 Left : -1890.6
S2 Slot0 ch1 Left : -1872.7
S2 Slot0 ch2 Left : -2240.2
S2 Slot0 ch3 Left : -2045.7
S2 Slot0 ch4 Left : -2166.1
S2 Slot0 ch5 Left : -1829.7
S2 Slot0 ch6 Left : -2017.2
S2 Slot0 ch7 Left : -1932.1
S2 Slot0 ch8 Left : -1871.2
S2 Slot0 ch9 Left : -2055.6
S2 Slot0 ch10 Left : -2190.7
S2 Slot0 ch11 Left : -2009.8
S2 Slot13 ch0 Left : -2190.9
S2 Slot13 ch1 Left : -2167
S2 Slot13 ch2 Left : -1896.6
S2 Slot13 ch3 Left : -1742.4
-----
Left S2 HV Right PMTs
S2 Slot12 ch0 Right : -1767.2
S2 Slot12 ch1 Right : -1781.5
S2 Slot12 ch2 Right : -1968.6
S2 Slot12 ch3 Right : -1847.5
S2 Slot12 ch4 Right : -1984.6
S2 Slot12 ch5 Right : -1903.7
S2 Slot12 ch6 Right : -1959.1
S2 Slot12 ch7 Right : -1924
S2 Slot12 ch8 Right : -2015.7
S2 Slot12 ch9 Right : -1988.7
S2 Slot12 ch10 Right : -2040.6
S2 Slot12 ch11 Right : -1709.4
S2 Slot13 ch4 Right : -1756.1
S2 Slot13 ch5 Right : -1879.1
S2 Slot13 ch6 Right : -1858.7
S2 Slot13 ch7 Right : -1833.5
-----
Left S1 HV
S1 Slot1 ch0 : -1785.2
S1 Slot1 ch1 : -1800.6
S1 Slot1 ch2 : -1791
S1 Slot1 ch3 : -1811.6
S1 Slot1 ch4 : -1701.4
S1 Slot1 ch5 : -1825.5
S1 Slot1 ch6 : -1951.4
S1 Slot1 ch7 : -1715.4
S1 Slot1 ch8 : -1901.3
S1 Slot1 ch9 : -1766.2
S1 Slot1 ch10 : -1811.4
S1 Slot1 ch11 : -1716
-----
Left Cerenkov HV
GCER Slot2 ch0 : -1521.5
GCER Slot2 ch1 : -1452.3
GCER Slot2 ch2 : -1515.8
GCER Slot2 ch3 : -1431
GCER Slot2 ch4 : -1781.9
GCER Slot2 ch5 : -1985.2
GCER Slot2 ch6 : -1663.4
GCER Slot2 ch7 : -1724.8
GCER Slot2 ch8 : -1993.8
GCER Slot2 ch9 : -1538.1
GCER Slot2 ch10 : -14.2
GCER Slot2 ch11 : -22.8
-----
Left A1 Cerenkov HV
A1 CER Slot14 ch0 : 2489.8
A1 CER Slot14 ch1 : 2530.6
A1 CER Slot14 ch2 : 2430
A1 CER Slot14 ch3 : 2466.1
A1 CER Slot14 ch4 : 2405.9
A1 CER Slot14 ch5 : 2098.1
A1 CER Slot14 ch6 : 2528.7
A1 CER Slot14 ch7 : 2613.4
A1 CER Slot14 ch8 : 2463.7
A1 CER Slot14 ch9 : 2511.2
A1 CER Slot14 ch10 : 2475.5
A1 CER Slot14 ch11 : 2235.2
-----
A1 CER Slot15 ch0 : 2495.6
A1 CER Slot15 ch1 : 2439.8
A1 CER Slot15 ch2 : 2404.2
A1 CER Slot15 ch3 : 2409.9
A1 CER Slot15 ch4 : 2508.5
A1 CER Slot15 ch5 : 2366
A1 CER Slot15 ch6 : 2466.4
A1 CER Slot15 ch7 : 2475.6
A1 CER Slot15 ch8 : 2489.5
A1 CER Slot15 ch9 : 2433.1
A1 CER Slot15 ch10 : 2366.5
A1 CER Slot15 ch11 : 2170.9
-----
Left Pion Rejector Layer 1 HV
PRL1 Slot3 ch0 : -900.3
PRL1 Slot3 ch1 : -815.1
PRL1 Slot3 ch2 : -931.9
PRL1 Slot3 ch3 : -986.6
PRL1 Slot3 ch4 : -787.1
PRL1 Slot3 ch5 : -886.9
PRL1 Slot3 ch6 : -1095
PRL1 Slot3 ch7 : -1012.6
PRL1 Slot3 ch8 : -834.9
PRL1 Slot3 ch9 : -816.1
PRL1 Slot3 ch10 : -886.6
PRL1 Slot3 ch11 : -809.5
PRL1 Slot4 ch0 : -901.1
PRL1 Slot4 ch1 : -931.4
PRL1 Slot4 ch2 : -768.2
PRL1 Slot4 ch3 : -941.2
PRL1 Slot4 ch4 : -921.7
PRL1 Slot4 ch5 : -824.3
PRL1 Slot4 ch6 : -837.5
PRL1 Slot4 ch7 : -829.5
PRL1 Slot4 ch8 : -1190.3
PRL1 Slot4 ch9 : -1039.2
PRL1 Slot4 ch10 : -1079.5
PRL1 Slot4 ch11 : -877.4
PRL1 Slot5 ch0 : -1075.5
PRL1 Slot5 ch1 : -902.4
PRL1 Slot5 ch2 : -945.2
PRL1 Slot5 ch3 : -764.9
PRL1 Slot5 ch4 : -918.3
PRL1 Slot5 ch5 : -823.3
PRL1 Slot5 ch6 : -838.7
PRL1 Slot5 ch7 : -891.8
PRL1 Slot5 ch8 : -786.7
PRL1 Slot5 ch9 : -841.4
PRL1 Slot5 ch10 : -16.5
PRL1 Slot5 ch11 : -26.4
-----
Left Pion Rejector Layer 2 HV
PRL2 Slot9 ch0 : -920.5
PRL2 Slot9 ch1 : -881.3
PRL2 Slot9 ch2 : -800.1
PRL2 Slot9 ch3 : -869.9
PRL2 Slot9 ch4 : -810.9
PRL2 Slot9 ch5 : -941.5
PRL2 Slot9 ch6 : -850.7
PRL2 Slot9 ch7 : -891.3
PRL2 Slot9 ch8 : -811.4
PRL2 Slot9 ch9 : -780.6
PRL2 Slot9 ch10 : -821
PRL2 Slot9 ch11 : -850.6
PRL2 Slot10 ch0 : -755.7
PRL2 Slot10 ch1 : -812.4
PRL2 Slot10 ch2 : -871
PRL2 Slot10 ch3 : -900.8
PRL2 Slot10 ch4 : -881.4
PRL2 Slot10 ch5 : -871
PRL2 Slot10 ch6 : -815.2
PRL2 Slot10 ch7 : -824.1
PRL2 Slot10 ch8 : -760.3
PRL2 Slot10 ch9 : -715.7
PRL2 Slot10 ch10 : -911
PRL2 Slot10 ch11 : -781.3
PRL2 Slot11 ch0 : -1000.7
PRL2 Slot11 ch1 : -900.4
PRL2 Slot11 ch2 : -850.6
PRL2 Slot11 ch3 : -1079.9
PRL2 Slot11 ch4 : -1050.2
PRL2 Slot11 ch5 : -800
PRL2 Slot11 ch6 : -890.2
PRL2 Slot11 ch7 : -1051.2
PRL2 Slot11 ch8 : -956.4
PRL2 Slot11 ch9 : -900.2
PRL2 Slot11 ch10 : -2.9
PRL2 Slot11 ch11 : -11.7
-----
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
# Map usage: Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map usage: Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map HV_ Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_ -c GET -P MV
# Map HV_ Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_ -c GET -P MC
# Map HV_Port Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_Port -c GET -P MV
# Map HV_Port Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_Port -c GET -P MC
# Map 'command_message' Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map 'command_message' Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Examples: Measured Voltage
*** Map name 1:,1: is missing or not properly set in the server list :
/adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Error(2) in information retrieval in -D Examples: -c GET -P MV
# Map Examples: Measured Current
*** Map name 1:,1: is missing or not properly set in the server list :
/adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Error(2) in information retrieval in -D Examples: -c GET -P MC
# Map Send Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Send Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
# Map Send Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Send Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map for Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map for Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
Threshold for 'mwdc_front' is +3.503 V (2526)
Threshold for 'mwdc_middle' is +4.397 V (2648)
Threshold for 'mwdc_back' is +4.397 V (2648)
Threshold for 'BB_Sh' is -0.020 V (2038)
Threshold for 'BB_PSh' is -0.020 V (2038)
Threshold for 'BB_Sh_2' is -0.020 V (2048)
Threshold for 'BB_Cer' is -1.000 V (21)
CODA config : config TWOARM_FB