| 1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
|---|---|---|---|---|---|---|---|---|---|
| Acceptable Beam in Use | 0.14 | 0.76 | 0.54 | 0.76 | 0.26 | 0.75 | 0.59 | 0.67 | 4.47 |
| Beam Available but Not in Use | 0.05 | 0.05 | 0.18 | 0.21 | 0.68 | 0.24 | 0.31 | 0.17 | 1.91 |
| Beam Not Available or Unacceptable | 0.81 | 0.19 | 0.28 | 0.03 | 0.07 | 0.02 | 0.10 | 0.15 | 1.64 |
| Accelerator Con- figuration Change | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Experiment Ready | 1.00 | 1.00 | 1.00 | 1.00 | 0.32 | 1.00 | 1.00 | 1.00 | 7.32 |
| Planned Config- uration Change | 0.00 | 0.00 | 0.00 | 0.00 | 0.68 | 0.00 | 0.00 | 0.00 | 0.68 |
| Unplanned Experiment Down | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Hall not ready reasons | |||||||||
| Target | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Data Acq | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Other | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HRSL | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HRSR | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HALL_OFF | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Bbite | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Comments: High value of BANU was due to either multiple times of LHRS momentum setting changes or the preparation for the Target Reference Cell; "configuration" change also represents the same.
Data Entry by: R. Subedi