NEXT
Make New Entry,
Make Followup Entry
User name a-onl
Log entry time 17:45:33 on April 22, 2009
Entry number 267341
keyword=Start_Run_1231,Run_type=Test,target_type=No Target,targetpol_poldir=Transverse-in-plane,targetpol_pol=58.7,beam_e0=4.734,beam_raster=on,beam_halfwaveplate=in,leftarm_p=0.6,leftarm_theta=45,leftarm_sieve=out,bbarm_i=710,bbarm_theta=45,bbarm_sieve=out,bbarm_zoff=0,comment_text=test LeftUnbuff config - retiming check - T4 and T3
Run Timestamp: Wed Apr 22 17:42:50 EDT 2009
Beginning-of-run EPICS data for Run Number 1231 at Wed Apr 22 17:43:01 EDT 2009
Run_type=Test
target_type=No Target
targetpol_poldir=Transverse-in-plane
targetpol_pol=58.7
beam_e0=4.734
beam_raster=on
beam_halfwaveplate=in
leftarm_p=0.6
leftarm_theta=45
leftarm_sieve=out
bbarm_i=710
bbarm_theta=45
bbarm_sieve=out
bbarm_zoff=0
comment_text=test LeftUnbuff config - retiming check - T4 and T3
; LeftHRS(+BB) on adaql2/a-onl account
; Prescale factors (integer), downloaded each run at prestart.
; Change this file only in-between runs.
; Maxima: (2^24)-1 = 16777215 for T1-T4 and 65535 for T5-T8
; The default factor is essentially infinite.
; T3 = L-HRS Singles (S1.and.S2)
; T4 = L-HRS Efficiency (S1.or.S2)
; T8 = 1024 Hz pulser
; String should be one line, no spaces, ending in carriage return
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
ps1=16777215,ps2=16777215,ps3=65535,ps4=1,ps5=65535,ps6=65535,ps7=10000,ps8=65535
Left Arm Q1 momentum : 1.00001
Left Arm Q1 power supply : 752.338
Left Arm Q1 gauss meter : 0.06399
Left Arm Q2 power supply current : 430.615
Left Arm Q2 momentum : 1.00004
Left Arm Q2 gauss meter : 0.22618
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 333.082
Left Arm D1 momentum : 0.999991
Left Arm D1 NMR : 0.370227
Left Arm Q3 power supply current : 398.424
Left Arm Q3 momentum : 1.00077
Left Arm Q3 gauss meter : -0.200833
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.3572
-----
BigBite magnet current setpoint : 100
BigBite magnet current readback : 99.4484
BigBite Gaussmeter readback : -0.06144
-----
Left Arm Top VDC Current : -1.9043
Left Arm Bottom VDC Current : -0.878906
Left Arm Top VDC voltage : 4
Left Arm Bottom VDC voltage : 3.99902
-----
Right Arm Top VDC Current : -1.2207
Right Arm Bottom VDC Current : -1.2207
Right Arm Top VDC voltage : -0.00537109
Right Arm Bottom VDC voltage : 0.00146484
-----
Average current of the two cavities : 0.0342622
Current on Unser monitor : -7.73939
Current on Upstream bcm : 0.0517965
Current on Downstream bcm : 0.0167279
Upstream Cavity Coefficient : 48.345
Downstream Cavity Coefficient : 47.773
Current on IBC0L02 (source) : 0.696097
Hall C Current : 29.257
Hall A momentum (Tiefenbach) (HALLA:p) : 1247.25
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 1246.8
Hall A energy (halla_MeV) : 1247.25
Hall C energy (hallc_MeV) : 5971.72
Delta(E)/E width (MV_AI_DXWID) : 0.454888
MBSY1c magnet current (amp) : 0.0377197
MBSY1c Bdl : 311488
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 6
Raster Y width : 6
-----
HacL_HPE1313A:0_Ch58 : -0.155762
HacL_HPE1313A:0_Ch55 : 23.291
HacL_HPE1313A:0_Ch54 : 0.0078125
Left Arm Angle Floor Angle : 17
Left Arm Angle Vernier : 31.5
Left Arm Scattering Angle : 17.0026
-----
Right Arm D1 momentum : 1
Right Arm arm angle : 16.9999
-----
Left VDC -DISC LVL Top : 3.89648
Left VDC -DISC LVL Bottom : 3.96826
Left VDC -DISC LVL Voltage1 : 4.97363
Left VDC -DISC LVL Voltage2 : -5.05273
-----
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
-----
Wien angle : -14.1961
Helicity Mode ON/OFF Random/Toggle : OFF
Wien field : 9.3576
Laser attenuation Hall A : 75
Laser power Hall A : 100
Half-wave plate (off=out) : OUT
rotating waveplate : 0
Beam Half-wave plate (off=out) : OUT
-----
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : No Delay
G0 Helicity Pattern : Quartet
G0 Helicity Cycle Rate Read : 30 Hz
-----
target OTR x-position : -10.5973
target OTR y-position : 5
target OTR x-width : 0
target OTR y-width : -0
target OTR data valid flag : No
target OTR In/Out : OTR is Out
-----
RTD1 (upstream) : 22.6953
RTD2 : 22.6367
RTD3 : 22.6367
RTD4 : 22.9785
RTD5 (downstream) : 22.6758
RTD6 (pump cell up) : 22.0312
RTD7 (pump cell down) : 22.3242
HacAi_hpchan7: Temp at Ref. Cell : 22.8125
HacAi_hpchan8: Temp at Ref. Cell : 23.1543
HacAi_hpchan9: Temp at Ref. Cell : 23.0664
Reference Cell Gas Pressure (psi) : -277.5
Reference Cell System Vacuum (Torr) : -282
Cooling Jets Flow Rate : 0
Target position : 0
Oven Air Flow : 21.2
-----
HaGenTargBrake : enabled
HaGenTargBrake : enabled
HacOMEGA_AL1 : 0
HacOMEGA_READ : 021.3
HacOMEGA_SP1 : 20
HacOMEGA_PROP1 : 1000
HacOMEGA_RST1 : 120
HacOMEGA_RATE : 0
-----
CLASER_STATE_MB : Disabled
CLASER_RDCUR : 9
CLASER_TEMP : 14
-----
CLASER2_STATE_MB : Disabled
CLASER2_RDCUR : 0
CLASER2_TEMP : 0
-----
CLASERAB_STATE_MB : Disabled
CLASERAB_GETCUR0 : 0
CLASERAB_GETCUR1 : 0
CLASERAB_GETTEMP0 : 0
CLASERAB_GETTEMP1 : 0
-----
CLASER3_STATE_MB : Disabled
CLASER3_RDCUR : 8
CLASER3_TEMP : 23
-----
CLASER4_STATE_MB : Disabled
CLASER4_RDCUR : 8
CLASER4_TEMP : 16
-----
CLASER5_STATE_MB : Disabled
CLASER5_RDCUR : 9
CLASER5_TEMP : 19.2
-----
CLASER6_STATE_MB : Disabled
CLASER6_RDCUR : 9
CLASER6_TEMP : 14
-----
CLASERAB2_STATE_M : Disabled
CLASERAB2_GETCUR0 : 0
CLASERAB2_GETCUR1 : 0
CLASERAB2_GETTEMP0 : 0
CLASERAB2_GETTEMP1 : 0
----
CLASERAB3_STATE_M : Disabled
CLASERAB3_GETCUR0 : 0
CLASERAB3_GETCUR1 : 0
CLASERAB3_GETTEMP0 : 0
CLASERAB3_GETTEMP1 : 0
----
nld1_lasmdp : 0
ntc1_temp : 26.0367
nld1_lasouti : Disable
ntc1_tecouti : Enable
nld1_lascond : 512
----
nld2_lasmdp : 0
ntc2_temp : 20
nld2_lasouti : Disable
ntc2_tecouti : Enable
nld2_lascond : 512
----
nld3_lasmdp : 0
ntc3_temp : 25
nld3_lasouti : Disable
ntc3_tecouti : Enable
nld3_lascond : 512
----
DDM45_1disp1_read : -0.134
DDM45_2disp1_read : 13.5294
DDM45_3disp1_read : -0.066
----
haPolHe3_Spin_State : 0
haPolHe3_Flip_Sequence_ID : 0
haPolHe3_Flip_Count : 0
haPolHe3_EPR_ID : 0
haPolHe3_EPR_POL : 0
haPolHe3_Last_Flip_Start : 0.000000000000000e+00
haPolHe3_Last_Flip_End : 0.000000000000000e+00
haPolHe3_FLIP_NMR_PHASE : 0
haPolHe3_FLIP_NMR_Mag : 0
haPolHe3_FLIP_NMR_Pol : 16.9785
HaGenTargSpin1 : disabled
HaGenTargSpin2 : enabled
HaGenTargPos : 0
----
SLI data valid? : No
SLI horiz size mm : 0
SLI Energy spread *10^5 : 0
SLI x position : 0.685714
SLI vert. size mm : 0
SLI y position : 2.98216
-----
Left S2 HV Left PMTs
S2 Slot0 ch0 Left : MF7b1461_0ch0property.F --- Invalid channel name
S2 Slot0 ch1 Left : MF7b1461_0ch1property.F --- Invalid channel name
S2 Slot0 ch2 Left : MF7b1461_0ch2property.F --- Invalid channel name
S2 Slot0 ch3 Left : MF7b1461_0ch3property.F --- Invalid channel name
S2 Slot0 ch4 Left : MF7b1461_0ch4property.F --- Invalid channel name
S2 Slot0 ch5 Left : MF7b1461_0ch5property.F --- Invalid channel name
S2 Slot0 ch6 Left : MF7b1461_0ch6property.F --- Invalid channel name
S2 Slot0 ch7 Left : MF7b1461_0ch7property.F --- Invalid channel name
S2 Slot0 ch8 Left : MF7b1461_0ch8property.F --- Invalid channel name
S2 Slot0 ch9 Left : MF7b1461_0ch9property.F --- Invalid channel name
S2 Slot0 ch10 Left : MF7b1461_0ch10property.F --- Invalid channel name
S2 Slot0 ch11 Left : MF7b1461_0ch11property.F --- Invalid channel name
S2 Slot13 ch0 Left : MF7b1461_13ch0property.F --- Invalid channel name
S2 Slot13 ch1 Left : MF7b1461_13ch1property.F --- Invalid channel name
S2 Slot13 ch2 Left : MF7b1461_13ch2property.F --- Invalid channel name
S2 Slot13 ch3 Left : MF7b1461_13ch3property.F --- Invalid channel name
-----
Left S2 HV Right PMTs
S2 Slot12 ch0 Right : MF7b1461_12ch0property.F --- Invalid channel name
S2 Slot12 ch1 Right : MF7b1461_12ch1property.F --- Invalid channel name
S2 Slot12 ch2 Right : MF7b1461_12ch2property.F --- Invalid channel name
S2 Slot12 ch3 Right : MF7b1461_12ch3property.F --- Invalid channel name
S2 Slot12 ch4 Right : MF7b1461_12ch4property.F --- Invalid channel name
S2 Slot12 ch5 Right : MF7b1461_12ch5property.F --- Invalid channel name
S2 Slot12 ch6 Right : MF7b1461_12ch6property.F --- Invalid channel name
S2 Slot12 ch7 Right :
S2 Slot12 ch8 Right :
S2 Slot12 ch9 Right :
S2 Slot12 ch10 Right :
S2 Slot12 ch11 Right :
S2 Slot13 ch4 Right :
S2 Slot13 ch5 Right :
S2 Slot13 ch6 Right :
S2 Slot13 ch7 Right :
-----
Left S1 HV
S1 Slot1 ch0 :
S1 Slot1 ch1 :
S1 Slot1 ch2 :
S1 Slot1 ch3 :
S1 Slot1 ch4 :
S1 Slot1 ch5 :
S1 Slot1 ch6 :
S1 Slot1 ch7 :
S1 Slot1 ch8 :
S1 Slot1 ch9 :
S1 Slot1 ch10 :
S1 Slot1 ch11 :
-----
Left Cerenkov HV
GCER Slot2 ch0 :
GCER Slot2 ch1 :
GCER Slot2 ch2 :
GCER Slot2 ch3 :
GCER Slot2 ch4 :
GCER Slot2 ch5 :
GCER Slot2 ch6 :
GCER Slot2 ch7 :
GCER Slot2 ch8 :
GCER Slot2 ch9 :
GCER Slot2 ch10 :
GCER Slot2 ch11 :
-----
Left Pion Rejector Layer 1 HV
PRL1 Slot3 ch0 :
PRL1 Slot3 ch1 :
PRL1 Slot3 ch2 :
PRL1 Slot3 ch3 :
PRL1 Slot3 ch4 :
PRL1 Slot3 ch5 :
PRL1 Slot3 ch6 :
PRL1 Slot3 ch7 :
PRL1 Slot3 ch8 :
PRL1 Slot3 ch9 :
PRL1 Slot3 ch10 :
PRL1 Slot3 ch11 :
PRL1 Slot4 ch0 :
PRL1 Slot4 ch1 :
PRL1 Slot4 ch2 :
PRL1 Slot4 ch3 :
PRL1 Slot4 ch4 :
PRL1 Slot4 ch5 :
PRL1 Slot4 ch6 :
PRL1 Slot4 ch7 :
PRL1 Slot4 ch8 :
PRL1 Slot4 ch9 :
PRL1 Slot4 ch10 :
PRL1 Slot4 ch11 :
PRL1 Slot5 ch0 :
PRL1 Slot5 ch1 :
PRL1 Slot5 ch2 :
PRL1 Slot5 ch3 :
PRL1 Slot5 ch4 :
PRL1 Slot5 ch5 :
PRL1 Slot5 ch6 :
PRL1 Slot5 ch7 :
PRL1 Slot5 ch8 :
PRL1 Slot5 ch9 :
PRL1 Slot5 ch10 :
PRL1 Slot5 ch11 :
-----
Left Pion Rejector Layer 2 HV
PRL2 Slot9 ch0 :
PRL2 Slot9 ch1 :
PRL2 Slot9 ch2 :
PRL2 Slot9 ch3 :
PRL2 Slot9 ch4 :
PRL2 Slot9 ch5 :
PRL2 Slot9 ch6 :
PRL2 Slot9 ch7 :
PRL2 Slot9 ch8 :
PRL2 Slot9 ch9 :
PRL2 Slot9 ch10 :
PRL2 Slot9 ch11 :
PRL2 Slot10 ch0 :
PRL2 Slot10 ch1 :
PRL2 Slot10 ch2 :
PRL2 Slot10 ch3 :
PRL2 Slot10 ch4 :
PRL2 Slot10 ch5 :
PRL2 Slot10 ch6 :
PRL2 Slot10 ch7 :
PRL2 Slot10 ch8 :
PRL2 Slot10 ch9 :
PRL2 Slot10 ch10 :
PRL2 Slot10 ch11 :
PRL2 Slot11 ch0 :
PRL2 Slot11 ch1 :
PRL2 Slot11 ch2 :
PRL2 Slot11 ch3 :
PRL2 Slot11 ch4 :
PRL2 Slot11 ch5 :
PRL2 Slot11 ch6 :
PRL2 Slot11 ch7 :
PRL2 Slot11 ch8 :
PRL2 Slot11 ch9 :
PRL2 Slot11 ch10 :
PRL2 Slot11 ch11 :
-----
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
# Map usage: Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map usage: Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map HV_ Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_ -c GET -P MV
# Map HV_ Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_ -c GET -P MC
# Map HV_Port Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_Port -c GET -P MV
# Map HV_Port Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_Port -c GET -P MC
# Map 'command_message' Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map 'command_message' Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Examples: Measured Voltage
*** Map name 1:,1: is missing or not properly set in the server list :
/adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Error(2) in information retrieval in -D Examples: -c GET -P MV
# Map Examples: Measured Current
*** Map name 1:,1: is missing or not properly set in the server list :
/adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Error(2) in information retrieval in -D Examples: -c GET -P MC
# Map Send Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Send Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
# Map Send Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Send Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map for Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map for Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
Threshold for 'mwdc_front' is +0.000 V (2048)
Threshold for 'mwdc_back' is +0.000 V (2048)
Threshold for 'E' in slot 1 is -0.060 V (207)
Threshold for 'E' in slot 2 is -0.060 V (207)
Threshold for 'E' in slot 3 is -0.060 V (207)
Threshold for 'dE' in slot 21 is -0.060 V (207)
Threshold for 'dE' in slot 22 is -0.060 V (207)
Threshold for 'dE' in slot 23 is -0.060 V (207)
Threshold for 'dEtrigger' in slot 17 is -0.120 V (447)
Threshold for 'dEtrigger' in slot 18 is -0.120 V (447)
Threshold for 'ND_veto' in slot 2 is -0.050 V (53)
Threshold for 'ND_veto' in slot 3 is -0.050 V (53)
Threshold for 'ND_veto' in slot 21 is -0.050 V (53)
Threshold for 'ND_veto' in slot 22 is -0.050 V (53)
CODA config : config LeftOnly
HAPPEX run : 31247