NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 19:38:52 on October 22, 2009
Entry number 296147
keyword=End_of_Parity_Run_13525__CODA_Config=Happex
************************************************
Run Number: 13525
End of Run Comment:
Run_type=Pedestal,beam_energy=3.4839,beam_polarization=87,beam_raster=off,comment_text=,dithering_magnet=off,dithering_magnets=,leftarm_p=pi,leftarm_theta=14,parity_feedback=off,parity_ihwp=in,rightarm_p=pi,rightarm_theta=14,target_fanspeed=73Hz,target_type=Empty
************************************************
End-of-Parity-run EPICS data for Run Number 13525 at Thu Oct 22 19:38:43 EDT 2009
CODA Configuration: Happex
# Timing board information: # Integrate Time = 33.00 ms, Ramp Delay = 0.00 us oversamp 1
Compton Run Number : 20603
-----------------------------------------
Wien angle : 17.1968
Wien BDL : 395.55
Wien field : 11.363
Laser attenuation Hall A : 70
Laser power Hall A : 100
Beam Half-wave plate Set(off=out) : IN
Beam Half-wave plate Read(off=out) : IN
Rotating waveplate : 10
IA Cell Setpoint Hall A : 4.79
IA Cell Setpoint Hall C : 4.88
PZT X Setpoint Hall A : 5.25
PZT Y Setpoint Hall A : 5
PZT X Setpoint Common : 4.8
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 8.753
Gun2: PC (PITA) NEG : 5.947
Gun3: PC (PITA) POS : 5.0246
Gun3: PC (PITA) NEG : 5
Pockels Cell Voltage POS : 2.00733
Pockels Cell Voltage NEG : 1.84615
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Random/Toggle Set : Random
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern Read : Quartet
G0 Helicity Random/Toggle Read : Random
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr746mW
Calculated power in cavity : 0.137953
Photodiode on table : 419.492
Laser X position on QPD 1 : 151.237
Laser Y position on QPD 1 : 412.241
Laser X position on QPD 2 : -15.3103
Laser Y position on QPD 2 : -511.447
QPD 1 sum : -2.53189
QPD 2 sum : -1.78356
Position set point for adjustable
mirror 1 (either x or y) : 100[c]
Position set point for adjustable
mirror 2 (either x or y) : -110[c]
Laser minimum temperature (35.8) : 35.8
Laser temperature set point : +47.2672
Polarisation in cavity : LEFT
Reflection photodiode : 0.814869
Gain of locking servo : 135
Tracking level (V) of locking servo : 0.65
Slow locking signal sent to laser : 0.148324
Fast locking signal sent to laser : 8.74748
Calculated polarisation in cavity : 25.2361
Photodiode 1 after Wollaston prism : 0.00655957
Photodiode 2 after Wollaston prism : 0.0040758
Step size for RHWP scan : 0
Laser temp slow ramp (1 = on) : ON
Extent of laser temp slow ramp (C) : 0.1
Speed of laser temp slow ramp up : 150
Speed of laser temp slow ramp down : 150
-----------------------------------------
Feedback info
-----------------------------------------
Parity DAQ Feedback Control(1=on) : 0
-----------------------------------------
LUMI HV info
-----------------------------------------
-----------------------------------------
Detector HV info
-----------------------------------------
HAPPEX Det, left arm HV - Left Slot7 Card2 Ch9 : -1590.2
S0 Front End, HV - Left Slot7 Card2 Ch9 : -4
S0 Back End, HV - Left Slot7 Card2 Ch9 : -4.5
-----------------------------------------
General Info
-----------------------------------------
Left Arm arm angle : -0.179
Right Arm arm angle : 0.197
-----------------------------------------
Magnet Info
-----------------------------------------
Left Arm Q1 power supply current : 0
Left Arm Q1 momentum : 0.000309796
Left Arm Q1 gauss meter : 0.0002892
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : 6.81372
Left Arm Q2 momentum : 0.0186848
Left Arm Q2 gauss meter : 0.0044
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 1101.72
Left Arm D1 momentum : 3.13704
Left Arm D1 NMR : 1.16169
Left Arm Q3 power supply current : 11.3494
Left Arm Q3 momentum : 0.0333223
Left Arm Q3 gauss meter : -0.0058948
Left Arm Q3 power supply polarity : disabled
Right Arm Q1 power supply current : 10.0404
Right Arm Q1 momentum : 0.0144486
Right Arm Q1 gauss meter : -0.0002925
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : 9.91896
Right Arm Q2 momentum : 0.0249536
Right Arm Q2 gauss meter : 0.005626
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 1029.47
Right Arm D1 momentum : 2.63348
Right Arm D1 NMR : 0.977429
Right Arm Q3 power supply current : -0.0022231
Right Arm Q3 momentum : -5.58696e-06
Right Arm Q3 gauss meter : -0.0002521
Right Arm Q3 power supply polarity : disabled
-----------------------------------------
VDC Currents
-----------------------------------------
Left Arm Top VDC Current : 1.51367
Left Arm Bottom VDC Current : 1.51367
Right Arm Top VDC Current : -1.70898
Right Arm Bottom VDC Current : -1.36719
Left Arm Top VDC voltage : 0.0180664
Left Arm Bottom VDC voltage : 0.0185547
Right Arm Top VDC voltage : -0.012207
Right Arm Bottom VDC voltage : -0.0102539
-----------------------------------------
Beam Info
-----------------------------------------
Average current of the two cavities : 2.52546
Current on Unser monitor : 3.93548
Current on Upstream bcm : 2.45096
Current on Downstream bcm : 2.59995
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 10.0008
Tiefenbach Hall A energy : 3483.72
Tiefenbach Hall C energy : 2344.6
Delta(E)/E width (MV_AI_DXWID) : 6.38833
MBSY1c Hall A Beam energy : 3489.72
MBSY3c Hall C Beam energy : 2349.75
MBSY1c magnet current (amp) : 145.346
MBSY1c Bdl : 870864
IPM1C12.XPOS : -0.211441
IPM1C12.YPOS : -0.281865
IPM1H04A.XPOS : -0.339821
IPM1H04A.YPOS : 1.13672
IPM1H04B.XPOS : -1.29618
IPM1H04B.YPOS : 2.09495
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
Survey X offset bpm12 : -0.189725
Survey Y offset bpm12 : -0.267325
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
ARC stuff
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Left Arm Collimator : 0.62002
HacL_HPE1313A:0_Ch58 : -0.212891
HacL_HPE1313A:0_Ch55 : 22.8516
HacL_HPE1313A:0_Ch54 : 0.0175781
Left Arm Angle Floor Angle : 0
Left Arm Angle Vernier : 0
Left Arm Scattering Angle : -0.179
Right Arm Collimator : 0.00805664
HacR_HPE1313A:0_Ch58 : -0.62793
HacR_HPE1313A:0_Ch55 : 21.9238
HacR_HPE1313A:0_Ch54 : -0.981445
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----------------------------------------
OTR BEAM INFO
-----------------------------------------
Arc OTR x-position : -10.5973
Arc OTR y-position : 5
Arc OTR x-width : 0
Arc OTR y-width : -0
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
fan frequency loop 3 : 0
Encoder position : 4665552
temperature loop 3-1 : 99.99
temperature loop 3-2 : 99.99
temperature loop 3-3 : 29.99
pressure fill target H2 : 26.1463
pressure fill bottle H2 : 26.1769
pressure ballast H2 : 38.8342
pressure exhaust H2 : 25.7145
cryogen input temp : 276.6
crogen return flow : 0.256543
JT valve setting : 0.0976562
-----------------------------------------