| 0000 | 0100 | 0200 | 0300 | 0400 | 0500 | 0600 | 0700 | Total Time | |
|---|---|---|---|---|---|---|---|---|---|
| Acceptable Beam in Use | 0.25 | 0.45 | 0.67 | 0.92 | 0.83 | 0.67 | 0.27 | 0.00 | 4.06 |
| Beam Available but Not in Use | 0.00 | 0.18 | 0.00 | 0.00 | 0.00 | 0.17 | 0.66 | 0.92 | 1.92 |
| Beam Not Available or Unacceptable | 0.75 | 0.37 | 0.33 | 0.08 | 0.17 | 0.17 | 0.07 | 0.08 | 2.02 |
| Accelerator Con- figuration Change | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Experiment Ready | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Planned Config- uration Change | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Unplanned Experiment Down | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 8.00 |
| Hall not ready reasons | |||||||||
| Target | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Data Acq | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Other | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 8.00 |
| HRSL | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HRSR | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HALL_OFF | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Comments: Owl shift hours. Target problem prevents experiment from taking production data. Beam, however, was used for some test of cavity BPMs, as well as Moller measurement, so these are indicated as ABU hours.
Data Entry by: ZAFAR AHMED