NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 22:43:20 on October 24, 2009
Entry number 296505
keyword=Start_Parity_Run_13580__CODA_Config=Happex_Run_type=Production,beam_energy=3.4839,beam_polarization=87,beam_raster=off,comment_text=text run, just got beam on 20 cm target, loop 1,dithering_magnet=off,dithering_magnets=,leftarm_p=pi,leftarm_theta=14,parity_feedback=off,parity_ihwp=in,rightarm_p=pi,rightarm_theta=14,target_fanspeed=73Hz,target_type=25cm LH2
Beginning-of-Parity-run EPICS data for Run Number 13580 at Sat Oct 24 22:43:12 EDT 2009
CODA Configuration: Happex
# Timing board information: # Integrate Time = 33.00 ms, Ramp Delay = 0.00 us oversamp 1
Compton Run Number : 20665
-----------------------------------------
Wien angle : 17.1968
Wien BDL : 395.55
Wien field : 11.363
Laser attenuation Hall A : 108
Laser power Hall A : 100
Beam Half-wave plate Set(off=out) : IN
Beam Half-wave plate Read(off=out) : IN
Rotating waveplate : 10
IA Cell Setpoint Hall A : 4.79
IA Cell Setpoint Hall C : 4.88
PZT X Setpoint Hall A : 5.25
PZT Y Setpoint Hall A : 5
PZT X Setpoint Common : 4.8
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 8.753
Gun2: PC (PITA) NEG : 5.947
Gun3: PC (PITA) POS : 5.0246
Gun3: PC (PITA) NEG : 5
Pockels Cell Voltage POS : 2.02198
Pockels Cell Voltage NEG : 1.8315
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Random/Toggle Set : Random
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern Read : Quartet
G0 Helicity Random/Toggle Read : Random
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr746mW
Calculated power in cavity : 0.130992
Photodiode on table : 712.612
Laser X position on QPD 1 : 68.8431
Laser Y position on QPD 1 : 1202.95
Laser X position on QPD 2 : -3.47167
Laser Y position on QPD 2 : -893.128
QPD 1 sum : -1.0108
QPD 2 sum : -0.841116
Position set point for adjustable
mirror 1 (either x or y) : -1450[c]
Position set point for adjustable
mirror 2 (either x or y) : -500[c]
Laser minimum temperature (35.8) : 35.8
Laser temperature set point : +47.1981
Polarisation in cavity : LEFT
Reflection photodiode : 0.513337
Gain of locking servo : 135
Tracking level (V) of locking servo : 0.65
Slow locking signal sent to laser : 0.148324
Fast locking signal sent to laser : 1.49606
Calculated polarisation in cavity : 21.5966
Photodiode 1 after Wollaston prism : 0.00650602
Photodiode 2 after Wollaston prism : 0.00419497
Step size for RHWP scan : 11162
Laser temp slow ramp (1 = on) : ON
Extent of laser temp slow ramp (C) : 0.1
Speed of laser temp slow ramp up : 150
Speed of laser temp slow ramp down : 150
-----------------------------------------
Feedback info
-----------------------------------------
Parity DAQ Feedback Control(1=on) : 0
-----------------------------------------
LUMI HV info
-----------------------------------------
-----------------------------------------
Detector HV info
-----------------------------------------
HAPPEX Det, left arm HV - Left Slot7 Card2 Ch9 : -1589.4
S0 Front End, HV - Left Slot7 Card2 Ch9 : -1699.6
S0 Back End, HV - Left Slot7 Card2 Ch9 : -5.3
-----------------------------------------
General Info
-----------------------------------------
Left Arm arm angle : 14.0003
Right Arm arm angle : 0.197
-----------------------------------------
Magnet Info
-----------------------------------------
Left Arm Q1 power supply current : 100.565
Left Arm Q1 momentum : 0.135591
Left Arm Q1 gauss meter : -0.00835
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : 0.0168621
Left Arm Q2 momentum : 0.00361909
Left Arm Q2 gauss meter : 0.0009456
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 98.5648
Left Arm D1 momentum : 0.300058
Left Arm D1 NMR : 0.61772
Left Arm Q3 power supply current : 101.14
Left Arm Q3 momentum : 0.260272
Left Arm Q3 gauss meter : -0.051253
Left Arm Q3 power supply polarity : disabled
Right Arm Q1 power supply current : 2362.12
Right Arm Q1 momentum : 3.14132
Right Arm Q1 gauss meter : -0.0587
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : 1352.03
Right Arm Q2 momentum : 3.14157
Right Arm Q2 gauss meter : 0.7063
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 1135.82
Right Arm D1 momentum : 3.14163
Right Arm D1 NMR : 1.16582
Right Arm Q3 power supply current : 1250.23
Right Arm Q3 momentum : 3.14201
Right Arm Q3 gauss meter : 0.5592
Right Arm Q3 power supply polarity : disabled
-----------------------------------------
VDC Currents
-----------------------------------------
Left Arm Top VDC Current : 1.41602
Left Arm Bottom VDC Current : 1.41602
Right Arm Top VDC Current : -1.61133
Right Arm Bottom VDC Current : -1.36719
Left Arm Top VDC voltage : 0.0185547
Left Arm Bottom VDC voltage : 0.0185547
Right Arm Top VDC voltage : -0.0117188
Right Arm Bottom VDC voltage : -0.0102539
-----------------------------------------
Beam Info
-----------------------------------------
Average current of the two cavities : 19.3716
Current on Unser monitor : 22.0614
Current on Upstream bcm : 19.0552
Current on Downstream bcm : 19.6879
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 27.0501
Tiefenbach Hall A energy : 3483.06
Tiefenbach Hall C energy : 2344.14
Delta(E)/E width (MV_AI_DXWID) : 2.53982
MBSY1c Hall A Beam energy : 3489.72
MBSY3c Hall C Beam energy : 2349.75
MBSY1c magnet current (amp) : 145.346
MBSY1c Bdl : 870864
IPM1C12.XPOS : 0.36983
IPM1C12.YPOS : 0.0971886
IPM1H04A.XPOS : -0.455243
IPM1H04A.YPOS : 1.18066
IPM1H04B.XPOS : -1.15834
IPM1H04B.YPOS : 1.88705
Survey X offset bpm4A : -0.63
Survey Y offset bpm4A : -0.9
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : -1
Survey X offset bpm12 : 0.417153
Survey Y offset bpm12 : 0.0734088
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
ARC stuff
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Left Arm Collimator : 0.619971
HacL_HPE1313A:0_Ch58 : -0.217285
HacL_HPE1313A:0_Ch55 : 22.6562
HacL_HPE1313A:0_Ch54 : 0.0170898
Left Arm Angle Floor Angle : 14
Left Arm Angle Vernier : 31.1
Left Arm Scattering Angle : 14.0003
Right Arm Collimator : 0.013623
HacR_HPE1313A:0_Ch58 : -0.627441
HacR_HPE1313A:0_Ch55 : 21.6309
HacR_HPE1313A:0_Ch54 : -0.983398
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----------------------------------------
OTR BEAM INFO
-----------------------------------------
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
fan frequency loop 3 : 0
Encoder position : 33077686
temperature loop 3-1 : 99.99
temperature loop 3-2 : 99.99
temperature loop 3-3 : 29.99
pressure fill target H2 : 31.1604
pressure fill bottle H2 : 31.2184
pressure ballast H2 : 31.0369
pressure exhaust H2 : 31.2825
cryogen input temp : 185.5
crogen return flow : 13.9405
JT valve setting : -0.146484
-----------------------------------------
#
# command to log run in database (should already have been done)\n
/adaqfs/home/apar/dalton/runlistDB/addRun2runlist.pl -r 13580 -d '2009-10-24 22:42:49' -t 33077686 -s IN