NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 07:21:27 on October 25, 2009
Entry number 296577
keyword=Start_Parity_Run_13591__CODA_Config=Happex_Run_type=Production,beam_energy=3.4839,beam_polarization=87,beam_raster=on,comment_text=production on loop 1 (100uA). Right arm only,dithering_magnet=on,dithering_magnets=,leftarm_p=pi,leftarm_theta=14,parity_feedback=on,parity_ihwp=in,rightarm_p=pi,rightarm_theta=14,target_fanspeed=65Hz,target_type=25cm LH2
Beginning-of-Parity-run EPICS data for Run Number 13591 at Sun Oct 25 07:21:20 EDT 2009
CODA Configuration: Happex
# Timing board information: # Integrate Time = 33.00 ms, Ramp Delay = 0.00 us oversamp 1
Compton Run Number : 20671
-----------------------------------------
Wien angle : 17.1968
Wien BDL : 395.55
Wien field : 11.363
Laser attenuation Hall A : 215
Laser power Hall A : 100
Beam Half-wave plate Set(off=out) : IN
Beam Half-wave plate Read(off=out) : IN
Rotating waveplate : 1200
IA Cell Setpoint Hall A : 4.79
IA Cell Setpoint Hall C : 4.26
PZT X Setpoint Hall A : 5.25
PZT Y Setpoint Hall A : 5
PZT X Setpoint Common : 4.8
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 9.172
Gun2: PC (PITA) NEG : 5.528
Gun3: PC (PITA) POS : 5.0246
Gun3: PC (PITA) NEG : 5
Pockels Cell Voltage POS : 1.99267
Pockels Cell Voltage NEG : 1.83883
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Random/Toggle Set : Random
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern Read : Quartet
G0 Helicity Random/Toggle Read : Random
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr746mW
Calculated power in cavity : 756.485
Photodiode on table : 393.071
Laser X position on QPD 1 : 109.843
Laser Y position on QPD 1 : 505.522
Laser X position on QPD 2 : -1.24129
Laser Y position on QPD 2 : -590.666
QPD 1 sum : -1.77013
QPD 2 sum : -1.29647
Position set point for adjustable
mirror 1 (either x or y) : -1450[c]
Position set point for adjustable
mirror 2 (either x or y) : -500[c]
Laser minimum temperature (35.8) : 35.8
Laser temperature set point : +47.1798
Polarisation in cavity : LEFT
Reflection photodiode : 0.436428
Gain of locking servo : 135
Tracking level (V) of locking servo : 0.65
Slow locking signal sent to laser : 0.100714
Fast locking signal sent to laser : 8.91595
Calculated polarisation in cavity : 98.0691
Photodiode 1 after Wollaston prism : 0.577724
Photodiode 2 after Wollaston prism : 59.2611
Step size for RHWP scan : 11162
Laser temp slow ramp (1 = on) : ON
Extent of laser temp slow ramp (C) : 0.1
Speed of laser temp slow ramp up : 150
Speed of laser temp slow ramp down : 150
-----------------------------------------
Feedback info
-----------------------------------------
Parity DAQ Feedback Control(1=on) : 1
-----------------------------------------
LUMI HV info
-----------------------------------------
-----------------------------------------
Detector HV info
-----------------------------------------
HAPPEX Det, left arm HV - Left Slot7 Card2 Ch9 : -1589.4
S0 Front End, HV - Left Slot7 Card2 Ch9 : -1699.6
S0 Back End, HV - Left Slot7 Card2 Ch9 : -5.3
-----------------------------------------
General Info
-----------------------------------------
Left Arm arm angle : 14.0003
Right Arm arm angle : 0.197
-----------------------------------------
Magnet Info
-----------------------------------------
Left Arm Q1 power supply current : 2363.56
Left Arm Q1 momentum : 3.14151
Left Arm Q1 gauss meter : -0.19931
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : 0.01587
Left Arm Q2 momentum : 0.00368419
Left Arm Q2 gauss meter : 0.0009896
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 98.5645
Left Arm D1 momentum : 0.300058
Left Arm D1 NMR : 0.662318
Left Arm Q3 power supply current : 101.142
Left Arm Q3 momentum : 0.260307
Left Arm Q3 gauss meter : -0.05126
Left Arm Q3 power supply polarity : disabled
Right Arm Q1 power supply current : 2362.44
Right Arm Q1 momentum : 3.14181
Right Arm Q1 gauss meter : -0.05868
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : 1352.05
Right Arm Q2 momentum : 3.14163
Right Arm Q2 gauss meter : 0.7063
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 1135.86
Right Arm D1 momentum : 3.14159
Right Arm D1 NMR : 1.1658
Right Arm Q3 power supply current : 1250.25
Right Arm Q3 momentum : 3.14206
Right Arm Q3 gauss meter : 0.5593
Right Arm Q3 power supply polarity : disabled
-----------------------------------------
VDC Currents
-----------------------------------------
Left Arm Top VDC Current : 1.46484
Left Arm Bottom VDC Current : 1.51367
Right Arm Top VDC Current : -1.70898
Right Arm Bottom VDC Current : -1.36719
Left Arm Top VDC voltage : 0.0185547
Left Arm Bottom VDC voltage : 0.0180664
Right Arm Top VDC voltage : -0.00927734
Right Arm Bottom VDC voltage : -0.0107422
-----------------------------------------
Beam Info
-----------------------------------------
Average current of the two cavities : 97.1362
Current on Unser monitor : 97.5305
Current on Upstream bcm : 95.4382
Current on Downstream bcm : 98.8342
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 107.243
Tiefenbach Hall A energy : 3482.98
Tiefenbach Hall C energy : 2344.13
Delta(E)/E width (MV_AI_DXWID) : 2.69829
MBSY1c Hall A Beam energy : 3489.72
MBSY3c Hall C Beam energy : 2349.75
MBSY1c magnet current (amp) : 145.346
MBSY1c Bdl : 870864
IPM1C12.XPOS : 0.467504
IPM1C12.YPOS : -0.110294
IPM1H04A.XPOS : -0.57447
IPM1H04A.YPOS : 1.4287
IPM1H04B.XPOS : -1.31221
IPM1H04B.YPOS : 2.11718
Survey X offset bpm4A : -0.63
Survey Y offset bpm4A : -0.9
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : -1
Survey X offset bpm12 : 0.467504
Survey Y offset bpm12 : -0.110294
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
ARC stuff
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Left Arm Collimator : 0.619922
HacL_HPE1313A:0_Ch58 : -0.219238
HacL_HPE1313A:0_Ch55 : 22.6074
HacL_HPE1313A:0_Ch54 : 0.0166016
Left Arm Angle Floor Angle : 14
Left Arm Angle Vernier : 31.1
Left Arm Scattering Angle : 14.0003
Right Arm Collimator : 0.0133301
HacR_HPE1313A:0_Ch58 : -0.626953
HacR_HPE1313A:0_Ch55 : 21.582
HacR_HPE1313A:0_Ch54 : -0.982422
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----------------------------------------
OTR BEAM INFO
-----------------------------------------
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
fan frequency loop 3 : 0
Encoder position : 33077684
temperature loop 3-1 : 99.99
temperature loop 3-2 : 99.99
temperature loop 3-3 : 29.99
pressure fill target H2 : 30.4082
pressure fill bottle H2 : 30.4982
pressure ballast H2 : 30.2739
pressure exhaust H2 : 30.3136
cryogen input temp : 179.9
crogen return flow : 19.1826
JT valve setting : -0.390625
-----------------------------------------
#
# command to log run in database (should already have been done)\n
/adaqfs/home/apar/dalton/runlistDB/addRun2runlist.pl -r 13591 -d '2009-10-25 07:20:59' -t 33077684 -s IN