NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 21:49:56 on October 26, 2009
Entry number 296785
keyword=Start_Parity_Run_13606__CODA_Config=Happex_Run_type=Test,beam_energy=3.4839,beam_polarization=87,beam_raster=on,comment_text=Al background studies, parity daq for unser, 5uA beam,dithering_magnet=off,dithering_magnets=,leftarm_p=pi,leftarm_theta=14,parity_feedback=off,parity_ihwp=in,rightarm_p=pi,rightarm_theta=14,target_fanspeed=65Hz,target_type=25cm LH2
Beginning-of-Parity-run EPICS data for Run Number 13606 at Mon Oct 26 21:49:50 EDT 2009
CODA Configuration: Happex
# Timing board information: # Integrate Time = 33.00 ms, Ramp Delay = 0.00 us oversamp 1
Compton Run Number : 20696
-----------------------------------------
Wien angle : 17.1968
Wien BDL : 395.55
Wien field : 11.363
Laser attenuation Hall A : 80
Laser power Hall A : 100
Beam Half-wave plate Set(off=out) : IN
Beam Half-wave plate Read(off=out) : IN
Rotating waveplate : 1200
IA Cell Setpoint Hall A : 4.79
IA Cell Setpoint Hall C : 4.3
PZT X Setpoint Hall A : 5.25
PZT Y Setpoint Hall A : 5
PZT X Setpoint Common : 4.8
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 9.178
Gun2: PC (PITA) NEG : 5.522
Gun3: PC (PITA) POS : 5.0246
Gun3: PC (PITA) NEG : 5
Pockels Cell Voltage POS : 1.99512
Pockels Cell Voltage NEG : 1.83883
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Random/Toggle Set : Random
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern Read : Quartet
G0 Helicity Random/Toggle Read : Random
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr741mW
Calculated power in cavity : 992.679
Photodiode on table : 402.044
Laser X position on QPD 1 : 115.979
Laser Y position on QPD 1 : 499.617
Laser X position on QPD 2 : 2.02494
Laser Y position on QPD 2 : -597.468
QPD 1 sum : -1.8446
QPD 2 sum : -1.3221
Position set point for adjustable
mirror 1 (either x or y) : 50[c]
Position set point for adjustable
mirror 2 (either x or y) : -620[c]
Laser minimum temperature (35.8) : 35.8
Laser temperature set point : +47.1500
Polarisation in cavity : RIGHT
Reflection photodiode : 0.353415
Gain of locking servo : 135
Tracking level (V) of locking servo : 0.65
Slow locking signal sent to laser : 0.056766
Fast locking signal sent to laser : -6.85406
Calculated polarisation in cavity : 97.8744
Photodiode 1 after Wollaston prism : 77.5877
Photodiode 2 after Wollaston prism : 0.833846
Step size for RHWP scan : 11162
Laser temp slow ramp (1 = on) : ON
Extent of laser temp slow ramp (C) : 0.1
Speed of laser temp slow ramp up : 150
Speed of laser temp slow ramp down : 150
-----------------------------------------
Feedback info
-----------------------------------------
Parity DAQ Feedback Control(1=on) : 0
-----------------------------------------
LUMI HV info
-----------------------------------------
-----------------------------------------
Detector HV info
-----------------------------------------
HAPPEX Det, left arm HV - Left Slot7 Card2 Ch9 : -2099.5
S0 Front End, HV - Left Slot7 Card2 Ch9 : -1700.3
S0 Back End, HV - Left Slot7 Card2 Ch9 : -1699.4
-----------------------------------------
General Info
-----------------------------------------
Left Arm arm angle : 14.0003
Right Arm arm angle : 0.197
-----------------------------------------
Magnet Info
-----------------------------------------
Left Arm Q1 power supply current : 2364.04
Left Arm Q1 momentum : 3.14222
Left Arm Q1 gauss meter : -0.19933
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : 1352.68
Left Arm Q2 momentum : 3.14138
Left Arm Q2 gauss meter : 0.7099
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 1103.4
Left Arm D1 momentum : 3.14164
Left Arm D1 NMR : 1.1634
Left Arm Q3 power supply current : 1250.49
Left Arm Q3 momentum : 3.14101
Left Arm Q3 gauss meter : -0.63064
Left Arm Q3 power supply polarity : disabled
Right Arm Q1 power supply current : 0
Right Arm Q1 momentum : 0.00188229
Right Arm Q1 gauss meter : -5.55e-05
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : -3.80656
Right Arm Q2 momentum : -0.0088455
Right Arm Q2 gauss meter : 0.0005173
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 0.0246542
Right Arm D1 momentum : 0.00548633
Right Arm D1 NMR : 0.750997
Right Arm Q3 power supply current : 0.000269014
Right Arm Q3 momentum : 0.000431546
Right Arm Q3 gauss meter : -0.0002229
Right Arm Q3 power supply polarity : enabled
-----------------------------------------
VDC Currents
-----------------------------------------
Left Arm Top VDC Current : -1.07422
Left Arm Bottom VDC Current : -1.26953
Right Arm Top VDC Current : -1.66016
Right Arm Bottom VDC Current : -1.41602
Left Arm Top VDC voltage : 3.99561
Left Arm Bottom VDC voltage : 4.00195
Right Arm Top VDC voltage : -0.00927734
Right Arm Bottom VDC voltage : -0.0102539
-----------------------------------------
Beam Info
-----------------------------------------
Average current of the two cavities : 4.89936
Current on Unser monitor : 6.97418
Current on Upstream bcm : 4.74187
Current on Downstream bcm : 5.05685
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 12.9619
Tiefenbach Hall A energy : 3482.96
Tiefenbach Hall C energy : 2344.13
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c Hall A Beam energy : 3489.72
MBSY3c Hall C Beam energy : 2349.75
MBSY1c magnet current (amp) : 145.346
MBSY1c Bdl : 870864
IPM1C12.XPOS : 0.480764
IPM1C12.YPOS : -0.112859
IPM1H04A.XPOS : -0.280972
IPM1H04A.YPOS : 1.57235
IPM1H04B.XPOS : -1.34548
IPM1H04B.YPOS : 2.06188
Survey X offset bpm4A : -0.63
Survey Y offset bpm4A : -0.9
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : -1
Survey X offset bpm12 : 0.480764
Survey Y offset bpm12 : -0.112859
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
ARC stuff
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Left Arm Collimator : 0.619971
HacL_HPE1313A:0_Ch58 : -0.213379
HacL_HPE1313A:0_Ch55 : 22.8516
HacL_HPE1313A:0_Ch54 : 0.0112305
Left Arm Angle Floor Angle : 14
Left Arm Angle Vernier : 31.1
Left Arm Scattering Angle : 14.0003
Right Arm Collimator : 0.0139648
HacR_HPE1313A:0_Ch58 : -0.630371
HacR_HPE1313A:0_Ch55 : 21.7285
HacR_HPE1313A:0_Ch54 : -0.980957
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----------------------------------------
OTR BEAM INFO
-----------------------------------------
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
fan frequency loop 3 : 0
Encoder position : 17740754
temperature loop 3-1 : 99.99
temperature loop 3-2 : 99.99
temperature loop 3-3 : 29.99
pressure fill target H2 : 30.7576
pressure fill bottle H2 : 30.8019
pressure ballast H2 : 30.454
pressure exhaust H2 : 31.1208
cryogen input temp : 185.2
crogen return flow : 13.2399
JT valve setting : -0.683594
-----------------------------------------
#
# command to log run in database (should already have been done)\n
/adaqfs/home/apar/dalton/runlistDB/addRun2runlist.pl -r 13606 -d '2009-10-26 21:49:41' -t 17740754 -s IN