NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 14:39:46 on October 28, 2009
Entry number 296899
keyword=End_of_Parity_Run_13625__CODA_Config=PvdNoQweak
************************************************
Run Number: 13625
End of Run Comment:
Run_type=Test,beam_energy=3.4839,beam_polarization=87,beam_raster=on,comment_text=check .db files,dithering_magnet=off,dithering_magnets=,leftarm_p=pi,leftarm_theta=14,parity_feedback=off,parity_ihwp=in,rightarm_p=pi,rightarm_theta=14,target_fanspeed=0,target_type=Empty
************************************************
End-of-Parity-run EPICS data for Run Number 13625 at Wed Oct 28 14:39:37 EDT 2009
CODA Configuration: PvdNoQweak
# Timing board information: # Integrate Time = 33.00 ms, Ramp Delay = 0.00 us oversamp 1
Compton Run Number : 0
-----------------------------------------
Wien angle : 17.1968
Wien BDL : 395.55
Wien field : 11.363
Laser attenuation Hall A : 90
Laser power Hall A : 100
Beam Half-wave plate Set(off=out) : IN
Beam Half-wave plate Read(off=out) : IN
Rotating waveplate : 0
IA Cell Setpoint Hall A : 4.79
IA Cell Setpoint Hall C : 4.3
PZT X Setpoint Hall A : 5.25
PZT Y Setpoint Hall A : 5
PZT X Setpoint Common : 4.8
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 9.178
Gun2: PC (PITA) NEG : 5.522
Gun3: PC (PITA) POS : 5.0246
Gun3: PC (PITA) NEG : 5
Pockels Cell Voltage POS : 1.75824
Pockels Cell Voltage NEG : 1.55556
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Random/Toggle Set : Random
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern Read :
G0 Helicity Random/Toggle Read : Random
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr741mW
Calculated power in cavity : 0.139316
Photodiode on table : 403.041
Laser X position on QPD 1 : -50.3866
Laser Y position on QPD 1 : -525.91
Laser X position on QPD 2 : 78.9044
Laser Y position on QPD 2 : -268.74
QPD 1 sum : -1.70909
QPD 2 sum : -2.49039
Position set point for adjustable
mirror 1 (either x or y) : Home (0[c])
Position set point for adjustable
mirror 2 (either x or y) : Home (0[c])
Laser minimum temperature (35.8) : 35.8
Laser temperature set point : +47.2031
Polarisation in cavity : RIGHT
Reflection photodiode : 0.0579869
Gain of locking servo : 135
Tracking level (V) of locking servo : 0.65
Slow locking signal sent to laser : 0.148324
Fast locking signal sent to laser : -4.77751
Calculated polarisation in cavity : 21.0037
Photodiode 1 after Wollaston prism : 0.0064257
Photodiode 2 after Wollaston prism : 0.00419497
Step size for RHWP scan : 0
Laser temp slow ramp (1 = on) : ON
Extent of laser temp slow ramp (C) : 0.1
Speed of laser temp slow ramp up : 150
Speed of laser temp slow ramp down : 150
-----------------------------------------
Feedback info
-----------------------------------------
Parity DAQ Feedback Control(1=on) : 0
-----------------------------------------
LUMI HV info
-----------------------------------------
-----------------------------------------
Detector HV info
-----------------------------------------
HAPPEX Det, left arm HV - Left Slot7 Card2 Ch9 : -0.5
S0 Front End, HV - Left Slot7 Card2 Ch9 : 0.5
S0 Back End, HV - Left Slot7 Card2 Ch9 : 0.3
-----------------------------------------
General Info
-----------------------------------------
Left Arm arm angle : -0.179
Right Arm arm angle : 0.197
-----------------------------------------
Magnet Info
-----------------------------------------
Left Arm Q1 power supply current : 0
Left Arm Q1 momentum : 5.31973e-05
Left Arm Q1 gauss meter : 0.000307
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : 0.0154993
Left Arm Q2 momentum : 8.00528e-05
Left Arm Q2 gauss meter : 0.0001676
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : -1.35069
Left Arm D1 momentum : 0.000644991
Left Arm D1 NMR : 0.310527
Left Arm Q3 power supply current : -0.00632692
Left Arm Q3 momentum : -1.5892e-05
Left Arm Q3 gauss meter : 0.00062033
Left Arm Q3 power supply polarity : disabled
Right Arm Q1 power supply current : 0
Right Arm Q1 momentum : 4.77201e-05
Right Arm Q1 gauss meter : -2.09e-05
Right Arm Q1 power supply polarity : 0
Right Arm Q2 power supply current : -0.000118317
Right Arm Q2 momentum : -2.92103e-07
Right Arm Q2 gauss meter : -0.0003047
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 0.0271888
Right Arm D1 momentum : 0.00211593
Right Arm D1 NMR : 0.221078
Right Arm Q3 power supply current : 0
Right Arm Q3 momentum : -1.40848e-07
Right Arm Q3 gauss meter : -0.0002674
Right Arm Q3 power supply polarity : enabled
-----------------------------------------
VDC Currents
-----------------------------------------
Left Arm Top VDC Current : 1.51367
Left Arm Bottom VDC Current : 1.5625
Right Arm Top VDC Current : -1.75781
Right Arm Bottom VDC Current : -1.36719
Left Arm Top VDC voltage : 0.019043
Left Arm Bottom VDC voltage : 0.019043
Right Arm Top VDC voltage : -0.012207
Right Arm Bottom VDC voltage : -0.012207
-----------------------------------------
Beam Info
-----------------------------------------
Average current of the two cavities : 0.0252694
Current on Unser monitor : 17.115
Current on Upstream bcm : 0.0372678
Current on Downstream bcm : 0.0132711
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 0.00495536
Tiefenbach Hall A energy : 3483.92
Tiefenbach Hall C energy : 2344.17
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c Hall A Beam energy : 3489.72
MBSY3c Hall C Beam energy : 2349.75
MBSY1c magnet current (amp) : 0
MBSY1c Bdl : 870864
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
Survey X offset bpm12 : 0
Survey Y offset bpm12 : 0
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
ARC stuff
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Left Arm Collimator : 0.619336
HacL_HPE1313A:0_Ch58 : -0.254395
HacL_HPE1313A:0_Ch55 : 22.6562
HacL_HPE1313A:0_Ch54 : 0.0620117
Left Arm Angle Floor Angle : 0
Left Arm Angle Vernier : 0
Left Arm Scattering Angle : -0.179
Right Arm Collimator : 0.0151367
HacR_HPE1313A:0_Ch58 : -0.637207
HacR_HPE1313A:0_Ch55 : 21.6797
HacR_HPE1313A:0_Ch54 : -0.866211
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----------------------------------------
OTR BEAM INFO
-----------------------------------------
Arc OTR x-position : -10.5973
Arc OTR y-position : 5
Arc OTR x-width : 0
Arc OTR y-width : -0
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
fan frequency loop 3 : 0
Encoder position : -6
temperature loop 3-1 : 99.99
temperature loop 3-2 : 99.99
temperature loop 3-3 : 29.99
pressure fill target H2 : 18.2208
pressure fill bottle H2 : 18.5214
pressure ballast H2 : 18.5473
pressure exhaust H2 : 18.6343
cryogen input temp : 297.8
crogen return flow : 0.188502
JT valve setting : 0.0488281
-----------------------------------------