Log entry time 00:19:47 on November 16, 2009

Entry number 300203

Summary

	Parity	I_beam	kilo-pairs	LHRS	RHRS
	------	------	----------	-----	-----
	13978	70 uA	  7.4		25506	 down
	13979	70 uA	 18.0		25509	5057
	13981	70 uA	 31.2		25514	5062
	13982	75 uA	 38.4		25515	5063
	13983	70 uA	 42.4		25516	5064
	13984	70 uA	 40.7		25517	5065
	13985	70 uA	 45.7		25518	5066

Details

Runs 13978 (parity), 25506 (LHRS) are in progress.

16:07---Ramesh asks for an escorted access to replace the RHRS preshower HV card. But, then the HV card starts responding. Cancel the access request.

16:18---Request 5 uA to do a quick steering and spot check. 16:22---Request 75 uA.

16:27---Start runs 13979, 25509, 5057.

16:52---RHRS preshower HV card dies again, this time more persistently. Request an escorted access to replace the RHRS preshower HV card.

17:00---Ramesh & the ARM are entering the hall.

17:00---Start BEAM OFF runs 13980, 25510, 5058.

17:41---Out of the hall. Request beam permit again.

17:53---Moving to the empty target.

17:58---Empty target is in position. Request 2 uA.

18:01---Move to BeO target. Request 5 uA, raster off.

18:08---Request 10 uA, 4x4 raster. Take spot++ runs, 25511 & 5059. Looks like the raster had been set to 6x6 temporarily.

Take another set of spot++ runs, 25512 & 5060.

18:19---Move to LD2

18:28---LD2 is in. Request 2 uA, 6x6 raster. Take spot++ runs, 25513 & 5061.

18:34---Request 70 uA.

18:36---Start runs 13981, 25514, 5062.

19:00---Request 75 uA.

19:33---Start runs 13982, 25515, 5063.

20:23---Back to 70 uA due to trippiness.

20:30---Start runs 13983, 25516, 5064.

21:27---Start runs 13984, 25517, 5065.

22:24---Start runs 13985, 25518, 5066.

23:20---Ended run 13985.

Requested IHWP to be inserted.

Ran flipper, to get SLUG 4.

[apar@adaql1 ~]$ flipper

****************************************

 Only run this program when the IHWP change has
 already been made.  If not, please Ctrl-C out now!

 Current slugnumber = 3
 Increment slugnumber? (Y/N)
y
New slugnumber = 4

Current IHWP = IN
Desired Settings for IHWP = IN
     Hall-A IA = 4.79
     Hall-C IA = 4.87
     PC Pos    = 8.187
     PC Neg    = 6.513
     RHWP      = 1200
Current settings (to be changed)
     Hall-A IA = 4.79
     Hall-C IA = 4.3
     PC Pos    = 7.698
     PC Neg    = 7.002
     RHWP      = 1200
Writing the current seetings to file /adaqfs/halla/apar/feedback/IHWP.OUT
for the next flip back.
Performing Flip to IHWP = IN settings
Halfwave plate IN, Slug 4
Making halog entry.
Writing Pockels cell epics variables.

Done... Please verify the new setpoints in the HAPPEX Feedback Monitor.

Giving feedback new values.

21:25---Start runs 13986, 25519, 5067. Start Compton run 21003.

23:56---Lost connection to iocha14. Reboot iocha14 according to Troubleshooting guide. "P0 Set" was zero. Reenter 3.66. Re-enable the NMR search for the dipole. The settings were about an amp off by the time we got relocked; this set of runs may have questionable data.

Shift ends with runs 13986, 25519, 5067, and Compton run 21003 in progress.