| 0000 | 0100 | 0200 | 0300 | 0400 | 0500 | 0600 | 0700 | Total Time | |
|---|---|---|---|---|---|---|---|---|---|
| Acceptable Beam in Use | 0.61 | 0.67 | 0.90 | 0.95 | 0.97 | 0.92 | 0.92 | 0.88 | 6.82 |
| Beam Available but Not in Use | 0.11 | 0.29 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.07 | 0.47 |
| Beam Not Available or Unacceptable | 0.28 | 0.04 | 0.10 | 0.05 | 0.03 | 0.08 | 0.08 | 0.04 | 0.71 |
| Accelerator Con- figuration Change | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Experiment Ready | 0.90 | 0.73 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 7.63 |
| Planned Config- uration Change | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Unplanned Experiment Down | 0.10 | 0.27 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.37 |
| Hall not ready reasons | |||||||||
| Target | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Data Acq | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Other | 0.10 | 0.27 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.37 |
| HRSL | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HRSR | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HALL_OFF | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Comments: Tripping rate could be better. Kept current just below 100uA for the shift otherwise the tripping rate looked too high.
Data Entry by: meziani