NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 23:00:04 on November 26, 2009
Entry number 302909
keyword=End_of_Parity_Run_14248__CODA_Config=Pvdis
************************************************
Run Number: 14248
End of Run Comment:
Run_type=Production,beam_energy=6.08,beam_polarization=87,beam_raster=on,comment_text=100 uA, Half wave plate OUT,dithering_magnet=on,dithering_magnets=,leftarm_p=3.66,leftarm_theta=12.9,parity_feedback=on,parity_ihwp=out,rightarm_p=2.63,rightarm_theta=20,target_fanspeed=60 Hz,target_type=20cm LD2
************************************************
End-of-Parity-run EPICS data for Run Number 14248 at Thu Nov 26 22:58:32 EST 2009
CODA Configuration: Pvdis
Compton Run Number : 21257
-----------------------------------------
Wien angle : WienAngle --- Invalid channel name
Wien BDL : 1718.2
Wien field : IGL1I00DAC6 --- Invalid channel name
Laser attenuation Hall A : psub_aa_pos --- Invalid channel name
Laser power Hall A : IGL1I00DAC0 --- Invalid channel name
Beam Half-wave plate Set(off=out) : OUT
Beam Half-wave plate Read(off=out) : OUT
Rotating waveplate : psub_pl_pos --- Invalid channel name
IA Cell Setpoint Hall A : IGLdac3:ao_7 --- Invalid channel name
IA Cell Setpoint Hall C : IGLdac3:ao_4 --- Invalid channel name
PZT X Setpoint Hall A : IGLdac3:ao_5 --- Invalid channel name
PZT Y Setpoint Hall A : IGLdac3:ao_6 --- Invalid channel name
PZT X Setpoint Common : IGLdac3:ao_0 --- Invalid channel name
PZT Y Setpoint Common : IGLdac3:ao_1 --- Invalid channel name
Gun2: PC (PITA) POS : IGLdac2:G2Ch3Pos --- Invalid channel name
Gun2: PC (PITA) NEG : IGLdac2:G2Ch4Neg --- Invalid channel name
Gun3: PC (PITA) POS : IGLdac2:G3Ch3Pos --- Invalid channel name
Gun3: PC (PITA) NEG : IGLdac2:G3Ch4Neg --- Invalid channel name
Pockels Cell Voltage POS : IGL1I00AI7 --- Invalid channel name
Pockels Cell Voltage NEG : IGL1I00AI8 --- Invalid channel name
Helicity Clock Set : Free Clock
Helicity Delay Set : 8 cycles
Helicity Pattern Set : Quartet
Helicity Clock Read : Free Clock
Helicity Settle Read : 500
Helicity Delay Read : 8 cycles
Helicity Pattern Read : Quartet
Helicity Frequency : 29.5596
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr746mW
Calculated power in cavity : 0.157056
Photodiode on table : 395.813
Laser X position on QPD 1 : 94.6113
Laser Y position on QPD 1 : 525.041
Laser X position on QPD 2 : 25.3356
Laser Y position on QPD 2 : -601.284
QPD 1 sum : -1.43563
QPD 2 sum : -1.28914
Position set point for adjustable
mirror 1 (either x or y) : -3130[c]
Position set point for adjustable
mirror 2 (either x or y) : -40[c]
Laser minimum temperature (35.8) : 35.8
Laser temperature set point : +47.1371
Polarisation in cavity : RIGHT
Reflection photodiode : 0.868583
Gain of locking servo : 135
Tracking level (V) of locking servo : 0.68
Slow locking signal sent to laser : 0.151987
Fast locking signal sent to laser : -6.58671
Calculated polarisation in cavity : 18.2
Photodiode 1 after Wollaston prism : 0.00733601
Photodiode 2 after Wollaston prism : 0.00507687
Step size for RHWP scan : 0
Laser temp slow ramp (1 = on) : ON
Extent of laser temp slow ramp (C) : 0.1
Speed of laser temp slow ramp up : 150
Speed of laser temp slow ramp down : 150
-----------------------------------------
Left Arm Magnets
-----------------------------------------
Left Arm Q1 power supply current : 2754.28
Left Arm Q1 momentum : 3.661
Left Arm Q1 gauss meter : -0.23213
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : 1575.91
Left Arm Q2 momentum : 3.65981
Left Arm Q2 gauss meter : 0.8272
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 1325.02
Left Arm D1 momentum : 3.66005
Left Arm D1 NMR : 1.35576
Left Arm Q3 power supply current : 1457.2
Left Arm Q3 momentum : 3.66021
Left Arm Q3 gauss meter : -0.7345
Left Arm Q3 power supply polarity : disabled
-----------------------------------------
Right Arm Magnets
-----------------------------------------
Right Arm Q1 power supply current : 1977.86
Right Arm Q1 momentum : 2.63036
Right Arm Q1 gauss meter : -0.04916
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : 1131.72
Right Arm Q2 momentum : 2.62966
Right Arm Q2 gauss meter : 0.5919
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 931.589
Right Arm D1 momentum : 2.63008
Right Arm D1 NMR : 0.975992
Right Arm Q3 power supply current : 1046.47
Right Arm Q3 momentum : 2.62991
Right Arm Q3 gauss meter : 0.4681
Right Arm Q3 power supply polarity : disabled
-----------------------------------------
HallA & Injector BCMs and Energy
-----------------------------------------
Average current of the two cavities : 0.0324259
Current on Unser monitor : 17.679
Current on Upstream bcm : 0.0384087
Current on Downstream bcm : 0.0264431
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 0.00520266
Tiefenbach Hall A energy : 6067.46
Tiefenbach Hall C energy : 6070.48
Delta(E)/E width (MV_AI_DXWID) : 1.36513
MBSY1c Hall A Beam energy : 6081.48
MBSY3c Hall C Beam energy : 6090.49
MBSY1c magnet current (amp) : 254.343
MBSY1c Bdl : 1.51764e+06
-----------------------------------------
ARC stuff and Raster
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 6
Raster Y width : 6
-----------------------------------------
Target BPMs
-----------------------------------------
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpm4A : -0.63
Survey Y offset bpm4A : -0.9
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : -1
Survey X offset bpm12 : 0
Survey Y offset bpm12 : 0
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
Target : L1 20cm
Encoder position : 33077692
fan frequency loop 1 : 60
fan frequency loop 2 : 0
fan frequency loop 3 : 0
temperature loop 1-1 : 22.77
temperature loop 1-2 : 22
temperature loop 1-3 : 22.31
temperature loop 2-1 : 100.09
temperature loop 2-2 : 95.14
temperature loop 2-3 : 119.99
temperature loop 3-1 : 99.99
temperature loop 3-2 : 99.99
temperature loop 3-3 : 29.99
pressure fill target H2 : 25.2323
pressure fill bottle H2 : 25.6214
pressure ballast H2 : 25.7893
pressure exhaust H2 : 24.8966
cryogen input temp : 218.2
crogen return flow : 0.390313
JT valve setting : -0.195312
-----------------------------------------
Parameters used for HAPPEX feedback
-----------------------------------------
Parity DAQ Feedback Control (ON=1) : 1
HAPPEX Feedback results from
/adaqfs/halla/apar/feedback/runlog/ffb_14248.log:
Cumulative stats for 100104 events:
Events failing cut conditions:
0 Low_beam 31819
1 Beam_burp 96
2 Evt_seq 15
3 Pair_seq 49
4 Startup 1
5 Low_beam_c 0
--------------------------------------------------