Log entry time 12:35:18 on November 30, 2009

Entry number 303720

****************************
 Run Number: 5433
 End of Run Comment:
Run_type=Cosmics,target_type=LD2, 20cm,beam_e0=6.06,beam_raster=on,beam_current=,leftarm_p=3.66,leftarm_theta=12.9,leftarm_sieve=out,rightarm_p=2.63,rightarm_theta=20,rightarm_sieve=out,comment_text=cosmic (deadtime study with 10.2 kHz tagger)
 

syntax error in expression "377/ ( 1   ps2 )"
    while executing
"expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  "
    invoked from within
"set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]..."
    invoked from within
"if { $ps($t) != 0 } {
  	     set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]
            } else {
             set  trigger($t,$h) 0
	    }"
    ("foreach" body line 3)
    invoked from within
"foreach t $scalerinfo(triglist) { 
	    set  trigger_real($t,$h)   [ expr $scal($map(trigger-$t,$h))          ]
            if { $ps($t) != 0 } {
  	     set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]
            } else {
             set  trigger($t,$h) 0
	    }
	}"
    ("foreach" body line 4)
    invoked from within
"foreach h { 0  } {
	set trigtot($h)      0
	set acc_trigtot($h) 0 
	foreach t $scalerinfo(triglist) { 
	    set  trigger_real($t,$h)   [ expr $scal($map(trigger-$t,$h))          ]
            if { $ps($t) != 0 } {
  	     set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]
            } else {
             set  trigger($t,$h) 0
	    }
	}
	set trigacc($h)  $scal($map(TS-accept,$h))
	set clock($h)    $scal($map(clock,$h)) 

# These correlations need updating ...

        set t3corr $trigger(3,$h)
        set t5corr $trigger(5,$h)

	foreach t $scalerinfo(triglist) { 
            set tcorr 0
            if { $t == 1 } {
               set tcorr $t5corr
	    } 
            if { $t == 3 } {
	       set tcorr [ expr $t5corr   ]
	    } 
            if { $t == 4 } {
	       set tcorr [ expr $t3corr  ]
	    } 
	    set  trigtot($h) [ expr $trigtot($h) + $scal($map(trigger-$t,$h))/($ps($t)+0.0001) - $tcorr/($ps($t)+0.0001)  ]
	}

  	set hvf(u1,$h)  $scal($map(bcm_u1,$h))
 	set hvf(u3,$h)  $scal($map(bcm_u3,$h))
 	set hvf(u10,$h) $scal($map(bcm_u10,$h))
 	set hvf(d1,$h)  $scal($map(bcm_d1,$h))
 	set hvf(d3,$h)  $scal($map(bcm_d3,$h))
 	set hvf(d10,$h) $scal($map(bcm_d10,$h))

    }"
    (procedure "halla_scaler_process" line 185)
    invoked from within
"halla_scaler_process .mid.tex scalerinfo "

****************************
End-of-run EPICS data for Run Number 5433 at Mon Nov 30 12:35:14 EST 2009

Left Arm Top VDC Current : 1.46484
Left Arm Bottom VDC Current : 1.61133
Left Arm Top VDC voltage : 0.0180664
Left Arm Bottom VDC voltage : 0.0185547
-----
Right Arm Top VDC Current : -1.80664
Right Arm Bottom VDC Current : -1.46484
Right Arm Top VDC voltage : -0.00439453
Right Arm Bottom VDC voltage : -0.00146484
-----
Left Arm Q1 momentum : 0.00112184
Left Arm Q1 power supply : 0.0534066
Left Arm Q1 gauss meter : 0.0002373
Left Arm Q2 gauss meter : 0.8273
Left Arm Q2 power supply current : 1575.93
Left Arm Q2 momentum : 3.65986
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : -1.37419
Left Arm D1 momentum : 9.43685e-05
Left Arm D1 NMR : 1.44412
Left Arm arm angle : 12.8971
Left Arm Q3 gauss meter : -0.73461
Left Arm Q3 power supply current : 1457.22
Left Arm Q3 momentum : 3.66026
Left Arm Q3 power supply polarity : disabled
-----
Right Arm Q1 momentum : 0.0035737
Right Arm Q1 power supply : 0.106813
Right Arm Q1 gauss meter : -7.98e-05
Right Arm Q2 power supply current : 1131.92
Right Arm Q2 momentum : 2.63013
Right Arm Q2 gauss meter : 0.5914
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 581.757
Right Arm D1 momentum : 0
Right Arm D1 NMR : 0.648559
Right Arm arm angle : 20.001
Right Arm Q3 power supply current : -0.00345608
Right Arm Q3 momentum : -9.17389e-06
Right Arm Q3 gauss meter : 9.42e-05
Right Arm Q3 power supply polarity : disabled
-----
Average current of the two cavities : 0.032531
Current on Unser monitor : 20.0093
Current on Upstream bcm : 0.0402895
Current on Downstream bcm : 0.0247725
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 0.00559468
Hall C Current : 0
MBSY1c magnet current (amp) : 0.0377197
MBSY1c Bdl : 1.51764e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 6067.46
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 6067.5
Hall A energy (halla_MeV) : 6067.46
Hall C energy (hallc_MeV) : 6070.48
Delta(E)/E width (MV_AI_DXWID) : 1.2037
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
-----
Wien angle : 74.7279
Wien BDL : 1718.2
Wien field : 49.796
Laser attenuation Hall A : 80
Laser power Hall A : 100
Half-wave plate (off=out) : OUT
rotating waveplate : 1200
Beam Half-wave plate (off=out) : OUT
-----
Helicity Settle Read : 500
Helicity Delay Read : 8 cycles
Helicity Pattern : Quartet
-----
Target : L1 20cm
fan frequency loop 1 : 60
fan frequency loop 3 : 0
Encoder position : 3.30777e+07
Target type : 3.30777e+07
temperature loop 1(1) : 22.65
temperature loop 1(2) : 22
temperature loop 1(3) : 22.3
temperature loop 3(1) : 99.99
temperature loop 3(2) : 99.99
temperature loop 3(3) : 29.99
Heat exchange LH2 : 24.8
Heat exchange LH2 : 266.2
HPH H2 loop 1 : 991.684
HPH H2 loop 3 : 0.000817917