Log entry time 15:57:36 on December 7, 2009

Entry number 305385

****************************
 Run Number: 5583
 End of Run Comment:
Run_type=Calibration,target_type=LD2, 20cm,beam_e0=6.06,beam_raster=on,beam_current=107,leftarm_p=2.63,leftarm_theta=20.0,leftarm_sieve=out,rightarm_p=2.63,rightarm_theta=20.0,rightarm_sieve=out,comment_text=Deadtime measurement at 108 uA (with 10.26 kHz tagger)
 

syntax error in expression "937596/ ( 100; )"
    while executing
"expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  "
    invoked from within
"set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]..."
    invoked from within
"if { $ps($t) != 0 } {
  	     set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]
            } else {
             set  trigger($t,$h) 0
	    }"
    ("foreach" body line 3)
    invoked from within
"foreach t $scalerinfo(triglist) { 
	    set  trigger_real($t,$h)   [ expr $scal($map(trigger-$t,$h))          ]
            if { $ps($t) != 0 } {
  	     set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]
            } else {
             set  trigger($t,$h) 0
	    }
	}"
    ("foreach" body line 4)
    invoked from within
"foreach h { 0  } {
	set trigtot($h)      0
	set acc_trigtot($h) 0 
	foreach t $scalerinfo(triglist) { 
	    set  trigger_real($t,$h)   [ expr $scal($map(trigger-$t,$h))          ]
            if { $ps($t) != 0 } {
  	     set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]
            } else {
             set  trigger($t,$h) 0
	    }
	}
	set trigacc($h)  $scal($map(TS-accept,$h))
	set clock($h)    $scal($map(clock,$h)) 

# These correlations need updating ...

        set t3corr $trigger(3,$h)
        set t5corr $trigger(5,$h)

	foreach t $scalerinfo(triglist) { 
            set tcorr 0
            if { $t == 1 } {
               set tcorr $t5corr
	    } 
            if { $t == 3 } {
	       set tcorr [ expr $t5corr   ]
	    } 
            if { $t == 4 } {
	       set tcorr [ expr $t3corr  ]
	    } 
	    set  trigtot($h) [ expr $trigtot($h) + $scal($map(trigger-$t,$h))/($ps($t)+0.0001) - $tcorr/($ps($t)+0.0001)  ]
	}

  	set hvf(u1,$h)  $scal($map(bcm_u1,$h))
 	set hvf(u3,$h)  $scal($map(bcm_u3,$h))
 	set hvf(u10,$h) $scal($map(bcm_u10,$h))
 	set hvf(d1,$h)  $scal($map(bcm_d1,$h))
 	set hvf(d3,$h)  $scal($map(bcm_d3,$h))
 	set hvf(d10,$h) $scal($map(bcm_d10,$h))

    }"
    (procedure "halla_scaler_process" line 185)
    invoked from within
"halla_scaler_process .mid.tex scalerinfo "

****************************
End-of-run EPICS data for Run Number 5583 at Mon Dec 7 15:57:33 EST 2009

Left Arm Top VDC Current : 1.51367
Left Arm Bottom VDC Current : 1.5625
Left Arm Top VDC voltage : 0.019043
Left Arm Bottom VDC voltage : 0.019043
-----
Right Arm Top VDC Current : -1.5625
Right Arm Bottom VDC Current : -1.51367
Right Arm Top VDC voltage : -0.000976562
Right Arm Bottom VDC voltage : -0.00146484
-----
Left Arm Q1 momentum : 2.63004
Left Arm Q1 power supply : 1978.61
Left Arm Q1 gauss meter : -0.16685
Left Arm Q2 gauss meter : 0.5955
Left Arm Q2 power supply current : 1132.5
Left Arm Q2 momentum : 2.63004
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 908.443
Left Arm D1 momentum : 2.63004
Left Arm D1 NMR : 0.973561
Left Arm arm angle : 19.9997
Left Arm Q3 gauss meter : -0.5283
Left Arm Q3 power supply current : 1047.09
Left Arm Q3 momentum : 2.63009
Left Arm Q3 power supply polarity : disabled
-----
Right Arm Q1 momentum : 2.63036
Right Arm Q1 power supply : 1977.86
Right Arm Q1 gauss meter : -0.04915
Right Arm Q2 power supply current : 1131.94
Right Arm Q2 momentum : 2.63016
Right Arm Q2 gauss meter : 0.5921
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 931.856
Right Arm D1 momentum : 2.62999
Right Arm D1 NMR : 0.975959
Right Arm arm angle : 20.001
Right Arm Q3 power supply current : 1046.59
Right Arm Q3 momentum : 2.63023
Right Arm Q3 gauss meter : 0.4683
Right Arm Q3 power supply polarity : disabled
-----
Average current of the two cavities : 0.0326568
Current on Unser monitor : 20.0779
Current on Upstream bcm : 0.0402945
Current on Downstream bcm : 0.0250191
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 0.010484
Hall C Current : 0
MBSY1c magnet current (amp) : 254.343
MBSY1c Bdl : 1.51764e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 6067.46
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 6067.5
Hall A energy (halla_MeV) : 6067.46
Hall C energy (hallc_MeV) : 6070.48
Delta(E)/E width (MV_AI_DXWID) : 0.253943
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
-----
Wien angle : 74.7279
Wien BDL : 1730
Wien field : 49.796
Laser attenuation Hall A : 65
Laser power Hall A : 100
Half-wave plate (off=out) : IN
rotating waveplate : 1200
Beam Half-wave plate (off=out) : IN
-----
Helicity Settle Read : 500
Helicity Delay Read : 8 cycles
Helicity Pattern : Quartet
-----
Target : Clear
fan frequency loop 1 : 60
fan frequency loop 3 : 0
Encoder position : 3.30777e+07
Target type : 3.30777e+07
temperature loop 1(1) : 22.35
temperature loop 1(2) : 21.95
temperature loop 1(3) : 22.24
temperature loop 3(1) : 0
temperature loop 3(2) : 0
temperature loop 3(3) : 0
Heat exchange LH2 : 0
Heat exchange LH2 : 0
HPH H2 loop 1 : 1020.14
HPH H2 loop 3 : 0.000504939