NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 12:06:43 on February 12, 2010
Entry number 309228
keyword=Start_Parity_Run_1144__CODA_Config=NoRight_Run_type=Test,beam_energy=4.87,beam_polarization=87,beam_raster=on,comment_text=Testing NoRight,dithering_magnet=on,dithering_magnets=,leftarm_p=3660,leftarm_theta=12.9,parity_feedback=on,parity_ihwp=out,rightarm_p=3100,rightarm_theta=12.9,target_fanspeed=60 Hz,target_type=Empty
Beginning-of-Parity-run EPICS data for Run Number 1144 at Fri Feb 12 12:05:47 EST 2010
CODA Configuration: NoRight
# Timing board information: # Integrate Time = 3.84 ms, Ramp Delay = 0.00 us oversamp 1
Compton Run Number : 21965
-----------------------------------------
Wien angle : 0
Wien BDL : 0
Wien field : 0
Laser attenuation Hall A : 45
Laser power Hall A : 100
Beam Half-wave plate Set(off=out) : OUT
Beam Half-wave plate Read(off=out) : OUT
Rotating waveplate : 0
IA Cell Setpoint Hall A : 5
IA Cell Setpoint Hall C : 5
PZT X Setpoint Hall A : 5.25
PZT Y Setpoint Hall A : 5
PZT X Setpoint Common : 5
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 5.958
Gun2: PC (PITA) NEG : 5.725
Gun3: PC (PITA) POS : 5
Gun3: PC (PITA) NEG : 5
Pockels Cell Voltage POS : 0
Pockels Cell Voltage NEG : 0
Helicity Clock Set : 240 Hz Line Sync
Helicity Delay Set : 8 windows
Helicity Pattern Set : Octet
Helicity Clock Read : 240 Hz Line Sync
Helicity Settle Read : 100
Helicity Delay Read : 8 windows
Helicity Pattern Read : Octet
Helicity Frequency : 240
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr 15mW
Calculated power in cavity : 0.176526
Photodiode on table : -0.125972
Laser X position on QPD 1 : -443.656
Laser Y position on QPD 1 : -163.404
Laser X position on QPD 2 : 1315.84
Laser Y position on QPD 2 : 1327.49
QPD 1 sum : -0.00366241
QPD 2 sum : 0.0012207
Position set point for adjustable
mirror 1 (either x or y) : 5320[c]
Position set point for adjustable
mirror 2 (either x or y) : 8520[c]
Laser minimum temperature (35.8) : 35.8
Laser temperature set point : +47.2713
Polarisation in cavity : RIGHT
Reflection photodiode : 0.0506622
Gain of locking servo : 168
Tracking level (V) of locking servo : 0.35
Slow locking signal sent to laser : -21.9978
Fast locking signal sent to laser : -22.1773
Calculated polarisation in cavity : 17.463
Photodiode 1 after Wollaston prism : 0.00800535
Photodiode 2 after Wollaston prism : 0.00562507
Step size for RHWP scan : 0
Laser temp slow ramp (1 = on) : OFF
Extent of laser temp slow ramp (C) : 0.1
Speed of laser temp slow ramp up : 150
Speed of laser temp slow ramp down : 150
Left S1 HV
S1 Slot1 ch0 : -5.5
S1 Slot1 ch1 : -5.4
S1 Slot1 ch2 : -5.2
S1 Slot1 ch3 : -4.7
S1 Slot1 ch4 : -5
S1 Slot1 ch5 : -3.8
S1 Slot1 ch6 : -4.3
S1 Slot1 ch7 : -5.8
S1 Slot1 ch8 : -6.5
S1 Slot1 ch9 : -5.9
S1 Slot1 ch10 : -5
S1 Slot1 ch11 : -6
-----
Left S2 HV Left PMTs
S2 Slot0 ch0 Left : -2.5
S2 Slot0 ch1 Left : -3.8
S2 Slot0 ch2 Left : -4.3
S2 Slot0 ch3 Left : -3.2
S2 Slot0 ch4 Left : -4
S2 Slot0 ch5 Left : -4.1
S2 Slot0 ch6 Left : -4.1
S2 Slot0 ch7 Left : -3.6
S2 Slot0 ch8 Left : -4.8
S2 Slot0 ch9 Left : -4.6
S2 Slot0 ch10 Left : -4.8
S2 Slot0 ch11 Left : -4.8
S2 Slot13 ch0 Left : -1954.5
S2 Slot13 ch1 Left : -2006.7
S2 Slot13 ch2 Left : -1776.6
S2 Slot13 ch3 Left : -1559.8
-----
Left S2 HV Right PMTs
S2 Slot12 ch0 Right : -1484.3
S2 Slot12 ch1 Right : -1627.6
S2 Slot12 ch2 Right : -1780.1
S2 Slot12 ch3 Right : -1700.6
S2 Slot12 ch4 Right : -1758
S2 Slot12 ch5 Right : -1732.5
S2 Slot12 ch6 Right : -1765.1
S2 Slot12 ch7 Right : -1472.1
S2 Slot12 ch8 Right : -1825.3
S2 Slot12 ch9 Right : -1700.7
S2 Slot12 ch10 Right : -1829.3
S2 Slot12 ch11 Right : -1550.9
S2 Slot13 ch4 Right : -1553
S2 Slot13 ch5 Right : -1635.9
S2 Slot13 ch6 Right : -1650
S2 Slot13 ch7 Right : -1626.6
-----
Left Cerenkov HV
GCER Slot2 ch0 : -3.6
GCER Slot2 ch1 : -3.3
GCER Slot2 ch2 : -4.6
GCER Slot2 ch3 : -4
GCER Slot2 ch4 : -3.2
GCER Slot2 ch5 : -4.3
GCER Slot2 ch6 : -13.2
GCER Slot2 ch7 : -2.9
GCER Slot2 ch8 : -4.6
GCER Slot2 ch9 : -4.3
GCER Slot2 ch10 : -1.9
GCER Slot2 ch11 : -1201.6
-----
Left Pion Rejector Layer 1 HV
PRL1 Slot3 ch0 : -3.6
PRL1 Slot3 ch1 : -4.1
PRL1 Slot3 ch2 : -4.2
PRL1 Slot3 ch3 : -5
PRL1 Slot3 ch4 : -4.2
PRL1 Slot3 ch5 : -4.7
PRL1 Slot3 ch6 : -4.3
PRL1 Slot3 ch7 : -5
PRL1 Slot3 ch8 : -5
PRL1 Slot3 ch9 : -4.8
PRL1 Slot3 ch10 : -4.5
PRL1 Slot3 ch11 : -3.8
PRL1 Slot4 ch0 : -5.6
PRL1 Slot4 ch1 : -3.9
PRL1 Slot4 ch2 : -5.8
PRL1 Slot4 ch3 : -3.5
PRL1 Slot4 ch4 : -4.6
PRL1 Slot4 ch5 : -6.3
PRL1 Slot4 ch6 : -4.7
PRL1 Slot4 ch7 : -4.3
PRL1 Slot4 ch8 : -4.5
PRL1 Slot4 ch9 : -5.4
PRL1 Slot4 ch10 : -7
PRL1 Slot4 ch11 : -6.1
PRL1 Slot5 ch0 : -7.8
PRL1 Slot5 ch1 : -8.5
PRL1 Slot5 ch2 : -9.5
PRL1 Slot5 ch3 : -8.5
PRL1 Slot5 ch4 : -7.6
PRL1 Slot5 ch5 : -6.6
PRL1 Slot5 ch6 : -8.4
PRL1 Slot5 ch7 : -8.1
PRL1 Slot5 ch8 : -9.2
PRL1 Slot5 ch9 : -8.4
PRL1 Slot5 ch10 : -27.3
PRL1 Slot5 ch11 : -26.4
-----
Left Pion Rejector Layer 2 HV
PRL2 Slot9 ch0 : -804.7
PRL2 Slot9 ch1 : -796.3
PRL2 Slot9 ch2 : -820.8
PRL2 Slot9 ch3 : -772.6
PRL2 Slot9 ch4 : -720.6
PRL2 Slot9 ch5 : -901
PRL2 Slot9 ch6 : -795.8
PRL2 Slot9 ch7 : -989.4
PRL2 Slot9 ch8 : -924.2
PRL2 Slot9 ch9 : -865.2
PRL2 Slot9 ch10 : -1079.9
PRL2 Slot9 ch11 : -1054.4
PRL2 Slot10 ch0 : -807
PRL2 Slot10 ch1 : -861.3
PRL2 Slot10 ch2 : -1009.7
PRL2 Slot10 ch3 : -904.5
PRL2 Slot10 ch4 : -864.8
PRL2 Slot10 ch5 : -825.6
PRL2 Slot10 ch6 : -838.1
PRL2 Slot10 ch7 : -829.4
PRL2 Slot10 ch8 : -1190.4
PRL2 Slot10 ch9 : -1041.2
PRL2 Slot10 ch10 : -1081.1
PRL2 Slot10 ch11 : -836.5
PRL2 Slot11 ch0 : -1075.5
PRL2 Slot11 ch1 : -901.2
PRL2 Slot11 ch2 : -946.3
PRL2 Slot11 ch3 : -765.8
PRL2 Slot11 ch4 : -914.8
PRL2 Slot11 ch5 : -823.8
PRL2 Slot11 ch6 : -839.8
PRL2 Slot11 ch7 : -890.5
PRL2 Slot11 ch8 : -785.9
PRL2 Slot11 ch9 : -840.6
PRL2 Slot11 ch10 : -2.9
PRL2 Slot11 ch11 : -11.7
-----
-----------------------------------------
Left Arm Magnets
-----------------------------------------
Left Arm Q1 power supply current : 0.694286
Left Arm Q1 momentum : 0.00184626
Left Arm Q1 gauss meter : 0.000191
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : -0.000389355
Left Arm Q2 momentum : -1.21721e-06
Left Arm Q2 gauss meter : 0.001084
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : -0.00336714
Left Arm D1 momentum : 0.00255352
Left Arm D1 NMR : 0.270408
Left Arm Q3 power supply current : -0.000504047
Left Arm Q3 momentum : -8.59795e-07
Left Arm Q3 gauss meter : -0.00013086
Left Arm Q3 power supply polarity : enabled
-----------------------------------------
Right Arm Magnets
-----------------------------------------
Right Arm Q1 power supply current : 0.16022
Right Arm Q1 momentum : 0.00301167
Right Arm Q1 gauss meter : -7.68e-05
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : -0.00025512
Right Arm Q2 momentum : -3.60833e-07
Right Arm Q2 gauss meter : 0.0005331
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : -0.00348067
Right Arm D1 momentum : 0.00462731
Right Arm D1 NMR : 0
Right Arm Q3 power supply current : 6.35172e-05
Right Arm Q3 momentum : 0.00190921
Right Arm Q3 gauss meter : 4.11e-05
Right Arm Q3 power supply polarity : enabled
-----------------------------------------
VDC Currents & Voltages
-----------------------------------------
Left Arm Top VDC Current : 1.51367
Left Arm Bottom VDC Current : 1.5625
Right Arm Top VDC Current : -1.61133
Right Arm Bottom VDC Current : -1.46484
Left Arm Top VDC voltage : 0.019043
Left Arm Bottom VDC voltage : 0.0195312
Right Arm Top VDC voltage : -0.0146484
Right Arm Bottom VDC voltage : -0.0244141
-----------------------------------------
HallA & Injector BCMs and Energy
-----------------------------------------
Average current of the two cavities : 0.0240145
Current on Unser monitor : 19.7234
Current on Upstream bcm : 0.0352747
Current on Downstream bcm : 0.0127543
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 0.00218085
Tiefenbach Hall A energy : 0
Tiefenbach Hall C energy : 7128.6
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c Hall A Beam energy : 7172.88
MBSY3c Hall C Beam energy : 7157.07
MBSY1c magnet current (amp) : 300
MBSY1c Bdl : 1.79e+06
-----------------------------------------
ARC stuff and Raster
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 0
Raster Y width : 0
-----------------------------------------
Target BPMs
-----------------------------------------
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpm4A : -0.63
Survey Y offset bpm4A : -0.9
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : -1
Survey X offset bpm12 : 0
Survey Y offset bpm12 : 0
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
Left Arm Collimator
-----------------------------------------
Left Arm Collimator : 0.000634766
HacL_HPE1313A:0_Ch58 : -0.259277
HacL_HPE1313A:0_Ch55 : 23.7305
HacL_HPE1313A:0_Ch54 : 0.0522461
Left Arm Angle Floor Angle : 0
Left Arm Angle Vernier : 0
Left Arm Scattering Angle : -0.179
-----------------------------------------
Right Arm Collimator
-----------------------------------------
Right Arm Collimator : -0.00102539
HacR_HPE1313A:0_Ch58 : -0.640137
HacR_HPE1313A:0_Ch55 : 22.2168
HacR_HPE1313A:0_Ch54 : -1.02246
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
Target : L2 20cm
Encoder position : 0
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
temperature loop 1-1 : 119.99
temperature loop 1-2 : 119.99
temperature loop 1-3 : 119.99
temperature loop 2-1 : 100.09
temperature loop 2-2 : 95.14
temperature loop 2-3 : 119.99
temperature loop 3-1 : 0
temperature loop 3-2 : 0
temperature loop 3-3 : 0
pressure fill target H2 : 14.6349
pressure fill bottle H2 : 14.5373
pressure ballast H2 : 24.8219
pressure exhaust H2 : 14.5968
cryogen input temp : 299.8
crogen return flow : 0.210831
JT valve setting : 98.4375
-----------------------------------------
Parameters used for HAPPEX feedback
-----------------------------------------
Parity DAQ Feedback Control (ON=1) : 1
anatype fdbk
curmon bcm1
feedback IA off 2 bcm1
feedback PITA on 1 bcm1
feedback PZT off 20 bpm4b
IAHallCparam slope 200.0
IAparam slope -1.0
PITAparam slope -28790
ncuts 6
cutnames Low_beam Beam_burp Evt_seq Pair_seq Startup Low_beam_c
extlo 10 10 25 25 0 10
exthi 1200 40 25 25 1 1200
#
# command to log run in database (should already have been done)\n
/adaqfs/home/apar/pvdis/runlistDB/addRun2runlist.pl -r 1144 -d '2010-02-12 12:05:42' -t 0 -s OUT