NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 15:28:01 on February 24, 2010
Entry number 309852
keyword=Start_Parity_Run_1375__CODA_Config=CHInj2_Run_type=Parityscan,beam_energy=0,beam_polarization=0,beam_raster=on,comment_text=zeroing charge asymmetry,dithering_magnet=off,dithering_magnets=,leftarm_p=0,leftarm_theta=0,parity_feedback=off,parity_ihwp=in,rightarm_p=0,rightarm_theta=0,target_fanspeed=0 Hz,target_type=Empty
Beginning-of-Parity-run EPICS data for Run Number 1375 at Wed Feb 24 15:26:51 EST 2010
CODA Configuration: CHInj2
# Timing board information: # Integrate Time = 3.84 ms, Ramp Delay = 0.00 us oversamp 1
Compton Run Number : 22025
-----------------------------------------
Wien angle : 0
Wien BDL : 2098.1
Wien field : 54.162
Laser attenuation Hall A : 92
Laser power Hall A : 100
Beam Half-wave plate Set(off=out) : IN
Beam Half-wave plate Read(off=out) : IN
Rotating waveplate : 150
IA Cell Setpoint Hall A : 4.96
IA Cell Setpoint Hall C : 5
PZT X Setpoint Hall A : 4
PZT Y Setpoint Hall A : 4
PZT X Setpoint Common : 5
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 5.622
Gun2: PC (PITA) NEG : 6.061
Gun3: PC (PITA) POS : 5
Gun3: PC (PITA) NEG : 5
Pockels Cell Voltage POS : 0
Pockels Cell Voltage NEG : 0
Helicity Clock Set : Free Clock
Helicity Delay Set : 8 windows
Helicity Pattern Set : Pair
Helicity Clock Read : Free Clock
Helicity Settle Read : 500
Helicity Delay Read : 8 windows
Helicity Pattern Read : Pair
Helicity Frequency : 29.5596
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power :
Calculated power in cavity : 0.198686
Photodiode on table : 0.0041999
Laser X position on QPD 1 : -332.743
Laser Y position on QPD 1 : 108.924
Laser X position on QPD 2 : -219.278
Laser Y position on QPD 2 : 442.478
QPD 1 sum : -0.00366241
QPD 2 sum : -0.00244163
Position set point for adjustable
mirror 1 (either x or y) : -6165[c]
Position set point for adjustable
mirror 2 (either x or y) : 59020[c]
Laser minimum temperature (35.8) : 35.8
Laser temperature set point :
Polarisation in cavity : RIGHT
Reflection photodiode : 0.00305191
Gain of locking servo : 168
Tracking level (V) of locking servo : 0.35
Slow locking signal sent to laser : 0.0128181
Fast locking signal sent to laser : 0.00549339
Calculated polarisation in cavity : 9.01561
Photodiode 1 after Wollaston prism : 0.00813922
Photodiode 2 after Wollaston prism : 0.00679299
Step size for RHWP scan : 0
Laser temp slow ramp (1 = on) : OFF
Extent of laser temp slow ramp (C) : 0.1
Speed of laser temp slow ramp up : 150
Speed of laser temp slow ramp down : 150
Left S1 HV
S1 Slot1 ch0 : -22.3
S1 Slot1 ch1 : -20.6
S1 Slot1 ch2 : -21.3
S1 Slot1 ch3 : -20.1
S1 Slot1 ch4 : -21.1
S1 Slot1 ch5 : -19.2
S1 Slot1 ch6 : -21.9
S1 Slot1 ch7 : -21.8
S1 Slot1 ch8 : -23.4
S1 Slot1 ch9 : -20.4
S1 Slot1 ch10 : -20.3
S1 Slot1 ch11 : -22.9
-----
Left S2 HV Left PMTs
S2 Slot0 ch0 Left : -1639.8
S2 Slot0 ch1 Left : -1690.8
S2 Slot0 ch2 Left : -2015.9
S2 Slot0 ch3 Left : -1820.9
S2 Slot0 ch4 Left : -1858.4
S2 Slot0 ch5 Left : -1661.7
S2 Slot0 ch6 Left : -1836.8
S2 Slot0 ch7 Left : -1804.4
S2 Slot0 ch8 Left : -1795.8
S2 Slot0 ch9 Left : -1918.4
S2 Slot0 ch10 Left : -1976.3
S2 Slot0 ch11 Left : -1823.7
S2 Slot13 ch0 Left : -1954.5
S2 Slot13 ch1 Left : -2006.7
S2 Slot13 ch2 Left : -1776.6
S2 Slot13 ch3 Left : -1559.8
-----
Left S2 HV Right PMTs
S2 Slot12 ch0 Right : -1483.5
S2 Slot12 ch1 Right : -1626.8
S2 Slot12 ch2 Right : -1780.8
S2 Slot12 ch3 Right : -1699.9
S2 Slot12 ch4 Right : -1757.2
S2 Slot12 ch5 Right : -1732.5
S2 Slot12 ch6 Right : -1765.9
S2 Slot12 ch7 Right : -1472.1
S2 Slot12 ch8 Right : -1825.3
S2 Slot12 ch9 Right : -1700.7
S2 Slot12 ch10 Right : -1830
S2 Slot12 ch11 Right : -1550.9
S2 Slot13 ch4 Right : -1553
S2 Slot13 ch5 Right : -1635.9
S2 Slot13 ch6 Right : -1650
S2 Slot13 ch7 Right : -1626.6
-----
Left Cerenkov HV
GCER Slot2 ch0 : -12.7
GCER Slot2 ch1 : -10.8
GCER Slot2 ch2 : -14.6
GCER Slot2 ch3 : -13.1
GCER Slot2 ch4 : -12.5
GCER Slot2 ch5 : -14.2
GCER Slot2 ch6 : -15.5
GCER Slot2 ch7 : -13.2
GCER Slot2 ch8 : -14.6
GCER Slot2 ch9 : -14.2
GCER Slot2 ch10 : -12.7
GCER Slot2 ch11 : -3.3
-----
Left Pion Rejector Layer 1 HV
PRL1 Slot3 ch0 : -12.8
PRL1 Slot3 ch1 : -12.5
PRL1 Slot3 ch2 : -14.2
PRL1 Slot3 ch3 : -13.4
PRL1 Slot3 ch4 : -12.6
PRL1 Slot3 ch5 : -13.9
PRL1 Slot3 ch6 : -12.7
PRL1 Slot3 ch7 : -15.5
PRL1 Slot3 ch8 : -13.4
PRL1 Slot3 ch9 : -13.9
PRL1 Slot3 ch10 : -13.7
PRL1 Slot3 ch11 : -12.1
PRL1 Slot4 ch0 : -14.7
PRL1 Slot4 ch1 : -13.2
PRL1 Slot4 ch2 : -15.6
PRL1 Slot4 ch3 : -12.7
PRL1 Slot4 ch4 : -13
PRL1 Slot4 ch5 : -15.5
PRL1 Slot4 ch6 : -13.8
PRL1 Slot4 ch7 : -12.8
PRL1 Slot4 ch8 : -13.7
PRL1 Slot4 ch9 : -15.2
PRL1 Slot4 ch10 : -19.4
PRL1 Slot4 ch11 : -15.9
PRL1 Slot5 ch0 : -23.1
PRL1 Slot5 ch1 : -23.8
PRL1 Slot5 ch2 : -24
PRL1 Slot5 ch3 : -23.8
PRL1 Slot5 ch4 : -22.9
PRL1 Slot5 ch5 : -20.4
PRL1 Slot5 ch6 : -24.5
PRL1 Slot5 ch7 : -25.7
PRL1 Slot5 ch8 : -24.6
PRL1 Slot5 ch9 : -23.7
PRL1 Slot5 ch10 : -27.3
PRL1 Slot5 ch11 : -27.2
-----
Left Pion Rejector Layer 2 HV
PRL2 Slot9 ch0 : -20
PRL2 Slot9 ch1 : -25.4
PRL2 Slot9 ch2 : -21.1
PRL2 Slot9 ch3 : -23.5
PRL2 Slot9 ch4 : -22.3
PRL2 Slot9 ch5 : -22.5
PRL2 Slot9 ch6 : -24.2
PRL2 Slot9 ch7 : -22.7
PRL2 Slot9 ch8 : -19.7
PRL2 Slot9 ch9 : -22.9
PRL2 Slot9 ch10 : -23.3
PRL2 Slot9 ch11 : -20
PRL2 Slot10 ch0 : -13.4
PRL2 Slot10 ch1 : -16.2
PRL2 Slot10 ch2 : -17.6
PRL2 Slot10 ch3 : -18.5
PRL2 Slot10 ch4 : -16.2
PRL2 Slot10 ch5 : -14.9
PRL2 Slot10 ch6 : -18
PRL2 Slot10 ch7 : -17.8
PRL2 Slot10 ch8 : -15.1
PRL2 Slot10 ch9 : -19.8
PRL2 Slot10 ch10 : -16.6
PRL2 Slot10 ch11 : -16.5
PRL2 Slot11 ch0 : -19.3
PRL2 Slot11 ch1 : -20
PRL2 Slot11 ch2 : -19.7
PRL2 Slot11 ch3 : -20.7
PRL2 Slot11 ch4 : -16.8
PRL2 Slot11 ch5 : -21.2
PRL2 Slot11 ch6 : -22
PRL2 Slot11 ch7 : -18.3
PRL2 Slot11 ch8 : -21.4
PRL2 Slot11 ch9 : -21.4
PRL2 Slot11 ch10 : -23.6
PRL2 Slot11 ch11 : -25.5
-----
-----------------------------------------
Left Arm Magnets
-----------------------------------------
Left Arm Q1 power supply current : 0
Left Arm Q1 momentum : 0.000693129
Left Arm Q1 gauss meter : 0.0002647
Left Arm Q1 power supply polarity : 0
Left Arm Q2 power supply current : -0.000396842
Left Arm Q2 momentum : -6.46294e-07
Left Arm Q2 gauss meter : 0.0010725
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : -0.00203387
Left Arm D1 momentum : 0.00250369
Left Arm D1 NMR : 0.270394
Left Arm Q3 power supply current : -0.000763593
Left Arm Q3 momentum : -1.52427e-06
Left Arm Q3 gauss meter : -0.00013425
Left Arm Q3 power supply polarity : enabled
-----------------------------------------
Right Arm Magnets
-----------------------------------------
Right Arm Q1 power supply current : 0.106813
Right Arm Q1 momentum : 0.00222163
Right Arm Q1 gauss meter : -4.24e-05
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : -0.000218146
Right Arm Q2 momentum : -6.8802e-07
Right Arm Q2 gauss meter : 0.0005351
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : -0.00342419
Right Arm D1 momentum : 0.00464258
Right Arm D1 NMR : 6.85876
Right Arm Q3 power supply current : 6.72535e-05
Right Arm Q3 momentum : 0.00191425
Right Arm Q3 gauss meter : 4.22e-05
Right Arm Q3 power supply polarity : enabled
-----------------------------------------
VDC Currents & Voltages
-----------------------------------------
Left Arm Top VDC Current : 5.0293
Left Arm Bottom VDC Current : 3.85742
Right Arm Top VDC Current : -26.8066
Right Arm Bottom VDC Current : 0.634766
Left Arm Top VDC voltage : 4
Left Arm Bottom VDC voltage : 4.00195
Right Arm Top VDC voltage : 4.00342
Right Arm Bottom VDC voltage : 4.01025
-----------------------------------------
HallA & Injector BCMs and Energy
-----------------------------------------
Average current of the two cavities : 0.0226905
Current on Unser monitor : 18.4109
Current on Upstream bcm : 0.0333756
Current on Downstream bcm : 0.0120054
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 9.29984e-05
Tiefenbach Hall A energy : 0
Tiefenbach Hall C energy : 0
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c Hall A Beam energy : 15616
MBSY3c Hall C Beam energy : 8874.29
MBSY1c magnet current (amp) : 0.0377197
MBSY1c Bdl : 3.897e+06
-----------------------------------------
ARC stuff and Raster
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 0
Raster Y width : 0
-----------------------------------------
Target BPMs
-----------------------------------------
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpm4A : -0.63
Survey Y offset bpm4A : -0.9
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : -1
Survey X offset bpm12 : 0
Survey Y offset bpm12 : 0
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
Left Arm Collimator
-----------------------------------------
Left Arm Collimator : 0.000976562
HacL_HPE1313A:0_Ch58 : -0.290527
HacL_HPE1313A:0_Ch55 : 23.0469
HacL_HPE1313A:0_Ch54 : 0.0532227
Left Arm Angle Floor Angle : 0
Left Arm Angle Vernier : 0
Left Arm Scattering Angle : -0.179
-----------------------------------------
Right Arm Collimator
-----------------------------------------
Right Arm Collimator : -0.0012207
HacR_HPE1313A:0_Ch58 : -0.643066
HacR_HPE1313A:0_Ch55 : 21.8262
HacR_HPE1313A:0_Ch54 : -1.02539
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
Target : L2 20cm
Encoder position : 0
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
temperature loop 1-1 : 119.99
temperature loop 1-2 : 119.99
temperature loop 1-3 : 119.99
temperature loop 2-1 : 100.09
temperature loop 2-2 : 95.14
temperature loop 2-3 : 119.99
temperature loop 3-1 : 0
temperature loop 3-2 : 0
temperature loop 3-3 : 0
pressure fill target H2 : 14.5418
pressure fill bottle H2 : 14.5602
pressure ballast H2 : 24.3671
pressure exhaust H2 : 14.638
cryogen input temp : 299.8
crogen return flow : 0
JT valve setting : 98.4863
-----------------------------------------
Parameters used for HAPPEX feedback
-----------------------------------------
Parity DAQ Feedback Control (ON=1) : 1
anatype fdbk
curmon bpm1I02ws
feedback PITA on 1 bpm1I02ws
PITAparam slope 5200
ncuts 6
cutnames Low_beam Beam_burp Evt_seq Pair_seq Startup Low_beam_c
extlo 10 10 25 25 0 10
exthi 1200 40 25 25 1 1200