NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 20:51:35 on March 4, 2010
Entry number 310774
keyword=End_of_Parity_Run_1704__CODA_Config=CHInj2
************************************************
Run Number: 1704
End of Run Comment:
Run_type=Test,beam_energy=0,beam_polarization=0,beam_raster=on,comment_text=injector studies:: PC ON, 120Hz, Polarization right, new cathode angle, PC@-25.2/-35.0, RHWP @7150, PITA scan,dithering_magnet=off,dithering_magnets=,leftarm_p=0,leftarm_theta=0,parity_feedback=off,parity_ihwp=in,rightarm_p=0,rightarm_theta=0,target_fanspeed=0 Hz,target_type=Empty
************************************************
End-of-Parity-run EPICS data for Run Number 1704 at Thu Mar 4 20:51:30 EST 2010
CODA Configuration: CHInj2
# Timing board information: # Integrate Time = 33.25 ms, Ramp Delay = 0.00 us oversamp 1
Compton Run Number : 0
-----------------------------------------
Wien angle (Vertical) : 88.8235
Wien Vertical BDL : 2149
Wien HV Polarity : OFF
Wien electrode Voltage : 55.48
Wien angle (Solenoids) : 90.7455
Wien BDL (First Solenoid) : 876.345
Wien BDL (Second Solenoid) : 876.345
Wien angle (Horizontal) : 0.1584
Wien BDL : -9.48
Wien HV Polarity (Horizontal) : OFF
Wien electrode Voltage (Horizontal) : 0.1
Laser attenuation Hall A : 118
Laser power Hall A : 100
Beam Half-wave plate Set(off=out) : IN
Beam Half-wave plate Read(off=out) : IN
Rotating waveplate : 7150
IA Cell Setpoint Hall A : 4.96
IA Cell Setpoint Hall C : 5
PZT X Setpoint Hall A : 4
PZT Y Setpoint Hall A : 4
PZT X Setpoint Common : 5
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 5.901
Gun2: PC (PITA) NEG : 9.371
Gun3: PC (PITA) POS : 5
Gun3: PC (PITA) NEG : 5
Pockels Cell Voltage POS : 2.50549
Pockels Cell Voltage NEG : 2.30525
Helicity Clock Set : Free Clock
Helicity Delay Set : 8 windows
Helicity Pattern Set : Quartet
Helicity Clock Read : Free Clock
Helicity Settle Read : 100
Helicity Delay Read : 8 windows
Helicity Pattern Read : Quartet
Helicity Frequency : 120.048
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr 21mW
Calculated power in cavity : 0.278592
Photodiode on table : 390.329
Laser X position on QPD 1 : 488.016
Laser Y position on QPD 1 : -89.1279
Laser X position on QPD 2 : 98.9592
Laser Y position on QPD 2 : -790.613
QPD 1 sum : -0.0122079
QPD 2 sum : -0.438259
Position set point for adjustable
mirror 1 (either x or y) : -8048[c]
Position set point for adjustable
mirror 2 (either x or y) : -74155[c]
Laser minimum temperature (35.8) : 35.8
Laser temperature set point : +47.2010
Polarisation in cavity : RIGHT
Reflection photodiode : 0.0445583
Gain of locking servo : 168
Tracking level (V) of locking servo : 0.35
Slow locking signal sent to laser : 0.148324
Fast locking signal sent to laser : 8.63761
Calculated polarisation in cavity : 90.907
Photodiode 1 after Wollaston prism : -0.00302544
Photodiode 2 after Wollaston prism : 0.00100107
Step size for RHWP scan : 3750
Laser temp slow ramp (1 = on) : OFF
Extent of laser temp slow ramp (C) : 0.01
Speed of laser temp slow ramp up : 150
Speed of laser temp slow ramp down : 150
-----------------------------------------
Left Arm Magnets
-----------------------------------------
Left Arm Q1 power supply current : 0
Left Arm Q1 momentum : 0.000494422
Left Arm Q1 gauss meter : 0.0002774
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : -0.000258322
Left Arm Q2 momentum : -5.03606e-07
Left Arm Q2 gauss meter : 0.0010326
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : -0.00214468
Left Arm D1 momentum : 0.00322635
Left Arm D1 NMR : 0.270396
Left Arm Q3 power supply current : -0.000515332
Left Arm Q3 momentum : -1.0287e-06
Left Arm Q3 gauss meter : -0.0001289
Left Arm Q3 power supply polarity : enabled
-----------------------------------------
Right Arm Magnets
-----------------------------------------
Right Arm Q1 power supply current : 0
Right Arm Q1 momentum : 0.000609756
Right Arm Q1 gauss meter : -3.15e-05
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : -0.000569399
Right Arm Q2 momentum : -1.32305e-06
Right Arm Q2 gauss meter : 0.0005338
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 0.0397418
Right Arm D1 momentum : 0.00505873
Right Arm D1 NMR : 0
Right Arm Q3 power supply current : 0.000280223
Right Arm Q3 momentum : 0.00198701
Right Arm Q3 gauss meter : 5.53e-05
Right Arm Q3 power supply polarity : enabled
-----------------------------------------
HallA & Injector BCMs and Energy
-----------------------------------------
Average current of the two cavities : 0.0234707
Current on Unser monitor : 17.1268
Current on Upstream bcm : 0.0342904
Current on Downstream bcm : 0.0127862
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 0.000777992
Tiefenbach Hall A energy : 397.035
Tiefenbach Hall C energy : 7128.6
Delta(E)/E width (MV_AI_DXWID) : 0.798885
MBSY1c Hall A Beam energy : 396.694
MBSY3c Hall C Beam energy : 7157.07
MBSY1c magnet current (amp) : 0
MBSY1c Bdl : 98995.4
-----------------------------------------
ARC stuff and Raster
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 0.2
Raster Y width : 0.2
-----------------------------------------
Target BPMs
-----------------------------------------
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpm4A : -0.63
Survey Y offset bpm4A : -0.9
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : -1
Survey X offset bpm12 : 0
Survey Y offset bpm12 : 0
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
Target : L2 20cm
Encoder position : 0
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
temperature loop 1-1 : 119.99
temperature loop 1-2 : 119.99
temperature loop 1-3 : 119.99
temperature loop 2-1 : 100.09
temperature loop 2-2 : 95.14
temperature loop 2-3 : 119.99
temperature loop 3-1 : 0
temperature loop 3-2 : 0
temperature loop 3-3 : 0
pressure fill target H2 : 14.5251
pressure fill bottle H2 : 14.5464
pressure ballast H2 : 24.0299
pressure exhaust H2 : 14.612
cryogen input temp : 299.8
crogen return flow : 0.101194
JT valve setting : 98.5352
-----------------------------------------
Parameters used for HAPPEX feedback
-----------------------------------------
Parity DAQ Feedback Control (ON=1) : 1
Did not obtain HAPPEX feedback cumulative results from
/adaqfs/halla/apar/feedback/runlog/ffb_1704.log