NEXT
Make New Entry,
Make Followup Entry
User name a-onl
Log entry time 06:29:01 on March 20, 2010
Entry number 312243
keyword=Start_Run_6094,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=super-thin C12, sieve slit in. ps8=100, moved Rx slider +5mm
Run Timestamp: Sat Mar 20 06:27:52 EDT 2010
Beginning-of-run EPICS data for Run Number 6094 at Sat Mar 20 06:28:48 EDT 2010
Run_type=Check out
target_type=Super-Thin C12
beam_e0=1.063
beam_raster=off
beam_current=2
leftarm_p=1.063
leftarm_theta=5.0
leftarm_sieve=sieve
rightarm_p=1.063
rightarm_theta=5.0
rightarm_sieve=sieve
comment_text=super-thin C12, sieve slit in. ps8=100, moved Rx slider +5mm
; R-HRS DAQ on adaql2/a-onl account
; Prescale factors (integer), downloaded each run at prestart.
; Change this file only in-between runs.
; Maxima: (2^24)-1 = 16777215 for T1-T4 and 65535 for T5-T8
; The default factor is essentially infinite.
; T1 = R-HRS S0 trigger
; T2 = R-HRS S2 trigger
; T3 = R-HRS PREX Detector
; T4-T7 = Eventually PREX stuff
; T8 = 1024 Hz p1ulser
; String should be one line, no spaces, ending in carriage return
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
ps1=100,ps2=100,ps3=99999,ps4=99999,ps5=100,ps6=100,ps7=65535,ps8=100
Left Arm Q1 momentum : 0.00126109
Left Arm Q1 power supply : 0
Left Arm Q1 gauss meter : 0.0002229
Left Arm Q2 power supply current : -2.24628e-05
Left Arm Q2 momentum : 0.00426523
Left Arm Q2 gauss meter : 0.0011336
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : 353.789
Left Arm D1 momentum : 1.06302
Left Arm D1 NMR : 0.393546
Left Arm Q3 power supply current : 462.329
Left Arm Q3 momentum : 1.0629
Left Arm Q3 gauss meter : -0.23324
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.3792
-----
Right Arm Q1 momentum : 1.06268
Right Arm Q1 power supply : 437.079
Right Arm Q1 gauss meter : -0.010966
Right Arm Q2 power supply current : 463.693
Right Arm Q2 momentum : 1.06302
Right Arm Q2 gauss meter : 0.2418
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 364.559
Right Arm D1 momentum : 1.06299
Right Arm D1 NMR : 0.394464
Right Arm Q3 power supply current : 460.799
Right Arm Q3 momentum : 1.06324
Right Arm Q3 gauss meter : 0.2057
Right Arm Q3 power supply polarity : disabled
Right Arm B Field Hall Probe (D-G) : -0.3898
-----
Left Arm Top VDC Current : 3.66211
Left Arm Bottom VDC Current : -1.51367
Left Arm Top VDC voltage : 4.01221
Left Arm Bottom VDC voltage : 4.00049
-----
Right Arm Top VDC Current : -5.22461
Right Arm Bottom VDC Current : 0.0976562
Right Arm Top VDC voltage : 3.99561
Right Arm Bottom VDC voltage : 3.98779
-----
Average current of the two cavities : 1.84625
Current on Unser monitor : 20.6835
Current on Upstream bcm : 1.68268
Current on Downstream bcm : 2.00983
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 5.41783
Hall C Current : 0
Hall A momentum (Tiefenbach) (HALLA:p) : 1060.79
Hall A momentum orbit correction (dpp) : 0.000103105
Hall A setup momentum (MMSHLAE) : 1063.12
Hall A energy (halla_MeV) : 1060.79
Hall C energy (hallc_MeV) : 5092.66
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c magnet current (amp) : 43.9227
MBSY1c Bdl : 264899
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 0.2
Raster Y width : 0.2
-----
HacL_HPE1313A:0_Ch58 : -0.259277
HacL_HPE1313A:0_Ch55 : 22.7539
HacL_HPE1313A:0_Ch54 : 0.0473633
Left Arm Angle Floor Angle : 0
Left Arm Angle Vernier : 0
Left Arm Scattering Angle : -0.179
-----
Right Arm D1 momentum : 1.06299
Right Arm arm angle : 0.197
-----
Left VDC -DISC LVL Top : 3.89014
Left VDC -DISC LVL Bottom : 3.95947
Left VDC -DISC LVL Voltage1 : 4.97949
Left VDC -DISC LVL Voltage2 : -5.05029
-----
Right Arm Arm Collimator : -0.00859375
HacR_HPE1313A:0_Ch58 : -0.633301
HacR_HPE1313A:0_Ch55 : 21.6309
HacR_HPE1313A:0_Ch54 : -0.969727
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----
IPM1C12.XPOS : -0.518037
IPM1C12.YPOS : -0.224437
IPM1H04A.XPOS : 2.26029
IPM1H04A.YPOS : 0.732262
IPM1H04B.XPOS : -0.691559
IPM1H04B.YPOS : 0.00252599
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
-----
Wien angle : -58.9992
Wien BDL : 2152.7
Wien field : 55.48
Laser attenuation Hall A : 71
Laser power Hall A : 100
Half-wave plate (off=out) : IN
rotating waveplate : 2350
Beam Half-wave plate (off=out) : IN
-----
Helicity Delay Set : 16 windows
Helicity Pattern Set : Octet
Helicity Clock Set : Free Clock
Helicity Settle Read : 100
Helicity Delay Read : 16 windows
Helicity Pattern : Octet
Helicity Clock Read : Free Clock
Helicity Frequency : 239.981
-----
Target : THIN Carbon
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 1.91872e+07
Target type : 1.91872e+07
temperature loop 1(1) : 119.99
temperature loop 1(2) : 119.99
temperature loop 1(3) : 119.99
Heat exchange loop 1 H2 : 282
temperature loop 3(1) : 99.99
temperature loop 3(2) : 99.99
temperature loop 3(3) : 29.99
Heat exchange loop 3 H2 : 302
pressure loop He : 45.2932
pressure loop H2 before : 14.5174
pressure loop H2 return : 14.5678
HPH He loop 1 : 0.0813417
HPH He loop 2 : 0.0118473
HPH H2 loop 3 : 0.00634721
Left S2 HV Left PMTs
S2 Slot0 ch0 Left : -3.2
S2 Slot0 ch1 Left : -3.8
S2 Slot0 ch2 Left : -5
S2 Slot0 ch3 Left : -4
S2 Slot0 ch4 Left : -4
S2 Slot0 ch5 Left : -4.1
S2 Slot0 ch6 Left : -4.1
S2 Slot0 ch7 Left : -3.6
S2 Slot0 ch8 Left : -4.8
S2 Slot0 ch9 Left : -4.6
S2 Slot0 ch10 Left : -4.8
S2 Slot0 ch11 Left : -4.1
S2 Slot13 ch0 Left : -1897.1
S2 Slot13 ch1 Left : -1925.8
S2 Slot13 ch2 Left : -1739.9
S2 Slot13 ch3 Left : -1552.1
-----
Left S2 HV Right PMTs
S2 Slot12 ch0 Right : -1513.1
S2 Slot12 ch1 Right : -1644.3
S2 Slot12 ch2 Right : -1797.3
S2 Slot12 ch3 Right : -1718.2
S2 Slot12 ch4 Right : -1813.1
S2 Slot12 ch5 Right : -1792.1
S2 Slot12 ch6 Right : -1805.7
S2 Slot12 ch7 Right : -1577.3
S2 Slot12 ch8 Right : -1885.4
S2 Slot12 ch9 Right : -1760.6
S2 Slot12 ch10 Right : -1858.5
S2 Slot12 ch11 Right : -1577.3
S2 Slot13 ch4 Right : -1609
S2 Slot13 ch5 Right : -1698.4
S2 Slot13 ch6 Right : -1676.7
S2 Slot13 ch7 Right : -1681.6
-----
Left S1 HV
S1 Slot1 ch0 : -22.3
S1 Slot1 ch1 : -9.2
S1 Slot1 ch2 : -1401.4
S1 Slot1 ch3 : -7.8
S1 Slot1 ch4 : -21.1
S1 Slot1 ch5 : -19.9
S1 Slot1 ch6 : -21.9
S1 Slot1 ch7 : -21.8
S1 Slot1 ch8 : -23.4
S1 Slot1 ch9 : -20.4
S1 Slot1 ch10 : -21.1
S1 Slot1 ch11 : -23.6
-----
Left Cerenkov HV
GCER Slot2 ch0 : -1522.3
GCER Slot2 ch1 : -8.6
GCER Slot2 ch2 : -16.1
GCER Slot2 ch3 : -16.1
GCER Slot2 ch4 : -13.3
GCER Slot2 ch5 : -15.8
GCER Slot2 ch6 : -14.8
GCER Slot2 ch7 : -15.6
GCER Slot2 ch8 : -16.1
GCER Slot2 ch9 : -8.9
GCER Slot2 ch10 : -1400.2
GCER Slot2 ch11 : -1.8
-----
Left Pion Rejector Layer 1 HV
PRL1 Slot3 ch0 : -12.8
PRL1 Slot3 ch1 : -13.3
PRL1 Slot3 ch2 : -15
PRL1 Slot3 ch3 : -13.4
PRL1 Slot3 ch4 : -12.6
PRL1 Slot3 ch5 : -13.9
PRL1 Slot3 ch6 : -13.4
PRL1 Slot3 ch7 : -15.5
PRL1 Slot3 ch8 : -13.4
PRL1 Slot3 ch9 : -13.9
PRL1 Slot3 ch10 : -13.7
PRL1 Slot3 ch11 : -12.1
PRL1 Slot4 ch0 : -14.7
PRL1 Slot4 ch1 : -13.2
PRL1 Slot4 ch2 : -15.6
PRL1 Slot4 ch3 : -12.7
PRL1 Slot4 ch4 : -13
PRL1 Slot4 ch5 : -15.5
PRL1 Slot4 ch6 : -13.8
PRL1 Slot4 ch7 : -12.8
PRL1 Slot4 ch8 : -13.7
PRL1 Slot4 ch9 : -15.2
PRL1 Slot4 ch10 : -19.4
PRL1 Slot4 ch11 : -15.9
PRL1 Slot5 ch0 : -22.3
PRL1 Slot5 ch1 : -23.1
PRL1 Slot5 ch2 : -24
PRL1 Slot5 ch3 : -23.1
PRL1 Slot5 ch4 : -22.2
PRL1 Slot5 ch5 : -20.4
PRL1 Slot5 ch6 : -23.7
PRL1 Slot5 ch7 : -25
PRL1 Slot5 ch8 : -23.8
PRL1 Slot5 ch9 : -23.7
PRL1 Slot5 ch10 : -26.5
PRL1 Slot5 ch11 : -25.6
-----
Left Pion Rejector Layer 2 HV
PRL2 Slot9 ch0 : -20.8
PRL2 Slot9 ch1 : -26.1
PRL2 Slot9 ch2 : -21.9
PRL2 Slot9 ch3 : -24.2
PRL2 Slot9 ch4 : -23
PRL2 Slot9 ch5 : -24
PRL2 Slot9 ch6 : -25
PRL2 Slot9 ch7 : -23.5
PRL2 Slot9 ch8 : -20.4
PRL2 Slot9 ch9 : -24.4
PRL2 Slot9 ch10 : -24.8
PRL2 Slot9 ch11 : -21.5
PRL2 Slot10 ch0 : -14.9
PRL2 Slot10 ch1 : -17
PRL2 Slot10 ch2 : -18.3
PRL2 Slot10 ch3 : -19.3
PRL2 Slot10 ch4 : -16.9
PRL2 Slot10 ch5 : -16.4
PRL2 Slot10 ch6 : -18.8
PRL2 Slot10 ch7 : -18.6
PRL2 Slot10 ch8 : -16.6
PRL2 Slot10 ch9 : -21.3
PRL2 Slot10 ch10 : -17.4
PRL2 Slot10 ch11 : -17.2
PRL2 Slot11 ch0 : -20.1
PRL2 Slot11 ch1 : -20.8
PRL2 Slot11 ch2 : -21.2
PRL2 Slot11 ch3 : -22.2
PRL2 Slot11 ch4 : -18.3
PRL2 Slot11 ch5 : -21.9
PRL2 Slot11 ch6 : -23.5
PRL2 Slot11 ch7 : -19.8
PRL2 Slot11 ch8 : -22.2
PRL2 Slot11 ch9 : -22.2
PRL2 Slot11 ch10 : -22.9
PRL2 Slot11 ch11 : -24.7
-----
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
# Map usage: Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map usage: Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map HV_ Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_ -c GET -P MV
# Map HV_ Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_ -c GET -P MC
# Map HV_Port Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_Port -c GET -P MV
# Map HV_Port Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_Port -c GET -P MC
# Map 'command_message' Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map 'command_message' Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Examples: Measured Voltage
*** Map name 1:,1: is missing or not properly set in the server list :
/adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Error(2) in information retrieval in -D Examples: -c GET -P MV
# Map Examples: Measured Current
*** Map name 1:,1: is missing or not properly set in the server list :
/adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Error(2) in information retrieval in -D Examples: -c GET -P MC
# Map Send Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Send Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
# Map Send Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Send Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map for Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map for Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
CODA config : config RightNoGem LeftHrs
HAPPEX run : 2159