NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 15:39:33 on March 25, 2010
Entry number 313674
keyword=End_of_Parity_Run_2302__CODA_Config=Prex
************************************************
Run Number: 2302
End of Run Comment:
Run_type=Test,beam_energy=0,beam_polarization=0,beam_raster=off,comment_text=dithering test,dithering_magnet=off,dithering_magnets=,leftarm_p=0,leftarm_theta=0,parity_feedback=off,parity_ihwp=in,rightarm_p=0,rightarm_theta=0,target_fanspeed=0 Hz,target_type=Empty
************************************************
End-of-Parity-run EPICS data for Run Number 2302 at Thu Mar 25 15:39:28 EDT 2010
CODA Configuration: Prex
# Timing board information: # Integrate Time = 3.84 ms, Ramp Delay = 0.00 us oversamp 1
Compton Run Number : 0
-----------------------------------------
Wien angle (Vertical) : 88.8235
Wien Vertical BDL (Gcm) : 2152.7
Wien HV Polarity : OFF
Wien electrode Voltage : 55.48
Wien angle (Solenoids) : 90.7455
Wien BDL (First Solenoid) (Gcm) : 876.345
Wien BDL (Second Solenoid) (Gcm) : 876.346
Wien angle (Horizontal) : -58.9992
Wien BDL (Gcm) : -1350.5
Wien HV Polarity (Horizontal) : ON
Wien electrode Voltage (Horizontal) : 37.247
Laser attenuation Hall A : 70
Laser power Hall A : 100
Beam Half-wave plate Set(off=out) : IN
Beam Half-wave plate Read(off=out) : IN
Rotating waveplate : 2350
IA Cell Setpoint Hall A : 4.96
IA Cell Setpoint Hall C : 5
PZT X Setpoint Hall A : 4
PZT Y Setpoint Hall A : 4
PZT X Setpoint Common : 4.9
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 6.776
Gun2: PC (PITA) NEG : 8.496
Gun3: PC (PITA) POS : 5
Gun3: PC (PITA) NEG : 5
Pockels Cell Voltage POS : 2.73993
Pockels Cell Voltage NEG : 2.52991
Helicity Clock Set : Free Clock
Helicity Delay Set : 16 windows
Helicity Pattern Set : Octet
Helicity Clock Read : Free Clock
Helicity Settle Read : 100
Helicity Stable Read : 4067
Helicity Delay Read : 16 windows
Helicity Pattern Read : Octet
Helicity Frequency : 239.981
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power :
Calculated power in cavity : 0.102771
Photodiode on table : 0.857895
Laser X position on QPD 1 : -221.835
Laser Y position on QPD 1 : -108.937
Laser X position on QPD 2 : 438.596
Laser Y position on QPD 2 : 7.25044e+06
QPD 1 sum : -0.00244163
QPD 2 sum : -0.00122085
Position set point for adjustable
mirror 1 (either x or y) : 705[c]
Position set point for adjustable
mirror 2 (either x or y) : -1795[c]
Laser minimum temperature (35.8) : 32.201
Laser temperature set point :
Polarisation in cavity : RIGHT
Reflection photodiode : 0.040896
Gain of locking servo : 168
Tracking level (V) of locking servo : 0.35
Slow locking signal sent to laser : 0.148324
Fast locking signal sent to laser : -6.59037
Calculated polarisation in cavity : 5.95485
Photodiode 1 after Wollaston prism : 0.00381941
Photodiode 2 after Wollaston prism : 0.00430309
Step size for RHWP scan : 0
Laser temp slow ramp (1 = on) : OFF
Extent of laser temp slow ramp (C) :
Speed of laser temp slow ramp up : 0.015
Speed of laser temp slow ramp down : 0.015
-----------------------------------------
Left Arm Magnets
-----------------------------------------
Left Arm Q1 power supply current : 0.694286
Left Arm Q1 momentum : 0.00200898
Left Arm Q1 gauss meter : 0.0001928
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : 0.0117817
Left Arm Q2 momentum : 0.00130987
Left Arm Q2 gauss meter : -0.0001458
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : -1.26161
Left Arm D1 momentum : 0.00472984
Left Arm D1 NMR : 0.166887
Left Arm Q3 power supply current : 1.37611
Left Arm Q3 momentum : 0.00809582
Left Arm Q3 gauss meter : -0.00085303
Left Arm Q3 power supply polarity : disabled
-----------------------------------------
Right Arm Magnets
-----------------------------------------
Right Arm Q1 power supply current : 0.16022
Right Arm Q1 momentum : 0.00177094
Right Arm Q1 gauss meter : -6.1e-05
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : -0.0135066
Right Arm Q2 momentum : -3.22355e-05
Right Arm Q2 gauss meter : 0.0004206
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 2.0251
Right Arm D1 momentum : 0.0256343
Right Arm D1 NMR : 0.203183
Right Arm Q3 power supply current : 0.0976035
Right Arm Q3 momentum : 0.00334882
Right Arm Q3 gauss meter : 0.0002983
Right Arm Q3 power supply polarity : disabled
-----------------------------------------
HallA & Injector BCMs and Energy
-----------------------------------------
Average current of the two cavities : 0.0236142
Current on Unser monitor : 19.2758
Current on Upstream bcm : 0.0327609
Current on Downstream bcm : 0.0144675
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 0.0299934
Tiefenbach Hall A energy : 1060.52
Tiefenbach Hall C energy : 5092.66
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c Hall A Beam energy : 1061.34
MBSY3c Hall C Beam energy : 5108.41
MBSY1c magnet current (amp) : 1.33514e-05
MBSY1c Bdl : 264859
-----------------------------------------
ARC stuff and Raster
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 8
Raster Y width : 8
-----------------------------------------
Target BPMs
-----------------------------------------
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpm4A : -0.63
Survey Y offset bpm4A : -0.9
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : -1
Survey X offset bpm12 : 0
Survey Y offset bpm12 : 0
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
Target : Empty
Encoder position : 13395292
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
temperature loop 1-1 : 119.99
temperature loop 1-2 : 119.99
temperature loop 1-3 : 119.99
temperature loop 2-1 : 100.09
temperature loop 2-2 : 95.14
temperature loop 2-3 : 119.99
temperature loop 3-1 : 99.99
temperature loop 3-2 : 99.99
temperature loop 3-3 : 29.99
pressure fill target H2 : 14.432
pressure fill bottle H2 : 14.5205
pressure ballast H2 : 24.2527
pressure exhaust H2 : 14.5068
cryogen input temp : 118.7
crogen return flow : 6.24226
JT valve setting : 0.585938
-----------------------------------------
Parameters used for HAPPEX feedback
-----------------------------------------
Parity DAQ Feedback Control (ON=1) : 1
Did not obtain HAPPEX feedback cumulative results from
/adaqfs/halla/apar/feedback/runlog/ffb_2302.log