NEXT
Make New Entry,
Make Followup Entry
User name a-onl
Log entry time 04:24:00 on April 20, 2010
Entry number 318386
keyword=End_of_Run_27440
****************************
Run Number: 27440
End of Run Comment:
Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
syntax error in expression "145239/ ( 2; )"
while executing
"expr $scal($map(trigger-$t,$h))/ ( $ps($t) ) "
invoked from within
"set trigger($t,$h) [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) ) ]..."
invoked from within
"if { $ps($t) != 0 } {
set trigger($t,$h) [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) ) ]
} else {
set trigger($t,$h) 0
}"
("foreach" body line 3)
invoked from within
"foreach t $scalerinfo(triglist) {
set trigger_real($t,$h) [ expr $scal($map(trigger-$t,$h)) ]
if { $ps($t) != 0 } {
set trigger($t,$h) [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) ) ]
} else {
set trigger($t,$h) 0
}
}"
("foreach" body line 4)
invoked from within
"foreach h { 0 } {
set trigtot($h) 0
set acc_trigtot($h) 0
foreach t $scalerinfo(triglist) {
set trigger_real($t,$h) [ expr $scal($map(trigger-$t,$h)) ]
if { $ps($t) != 0 } {
set trigger($t,$h) [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) ) ]
} else {
set trigger($t,$h) 0
}
}
set trigacc($h) $scal($map(TS-accept,$h))
set clock($h) $scal($map(clock,$h))
# These correlations need updating ...
set t3corr $trigger(3,$h)
set t5corr $trigger(5,$h)
foreach t $scalerinfo(triglist) {
set tcorr 0
if { $t == 1 } {
set tcorr $t5corr
}
if { $t == 3 } {
set tcorr [ expr $t5corr ]
}
if { $t == 4 } {
set tcorr [ expr $t3corr ]
}
set trigtot($h) [ expr $trigtot($h) + $scal($map(trigger-$t,$h))/($ps($t)+0.0001) - $tcorr/($ps($t)+0.0001) ]
}
set hvf(u1,$h) $scal($map(bcm_u1,$h))
set hvf(u3,$h) $scal($map(bcm_u3,$h))
set hvf(u10,$h) $scal($map(bcm_u10,$h))
set hvf(d1,$h) $scal($map(bcm_d1,$h))
set hvf(d3,$h) $scal($map(bcm_d3,$h))
set hvf(d10,$h) $scal($map(bcm_d10,$h))
}"
(procedure "halla_scaler_process" line 185)
invoked from within
"halla_scaler_process .mid.tex scalerinfo "
****************************
End-of-run EPICS data for Run Number 27440 at Tue Apr 20 04:23:50 EDT 2010
Left Arm Top VDC Current : 1.46484
Left Arm Bottom VDC Current : 1.5625
Left Arm Top VDC voltage : 0.0175781
Left Arm Bottom VDC voltage : 0.0185547
-----
Right Arm Top VDC Current : -1.75781
Right Arm Bottom VDC Current : -1.51367
Right Arm Top VDC voltage : -0.0131836
Right Arm Bottom VDC voltage : -0.0112305
-----
Left Arm Q1 momentum : 1.063
Left Arm Q1 power supply : 582.078
Left Arm Q1 gauss meter : -0.04885
Left Arm Q2 gauss meter : 0.24234
Left Arm Q2 power supply current : 461.81
Left Arm Q2 momentum : 1.06299
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 353.907
Left Arm D1 momentum : 1.06302
Left Arm D1 NMR : 0.393546
Left Arm arm angle : -0.179
Left Arm Q3 gauss meter : -0.28691
Left Arm Q3 power supply current : 569.931
Left Arm Q3 momentum : 1.06314
Left Arm Q3 power supply polarity : disabled
-----
Right Arm Q1 momentum : 1.06407
Right Arm Q1 power supply : 582.666
Right Arm Q1 gauss meter : -0.014558
Right Arm Q2 power supply current : 463.546
Right Arm Q2 momentum : 1.06328
Right Arm Q2 gauss meter : 0.2425
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 364.473
Right Arm D1 momentum : 1.06298
Right Arm D1 NMR : 0.394461
Right Arm arm angle : 0.197
Right Arm Q3 power supply current : 573.432
Right Arm Q3 momentum : 1.06297
Right Arm Q3 gauss meter : 0.25599
Right Arm Q3 power supply polarity : disabled
-----
Average current of the two cavities : 5.46359
Current on Unser monitor : 26.527
Current on Upstream bcm : 5.48648
Current on Downstream bcm : 5.4407
Upstream Cavity Coefficient : 52.95
Downstream Cavity Coefficient : 44.77
Current on IBC0L02 (source) : 5.52364
Hall C Current : 0
MBSY1c magnet current (amp) : 43.916
MBSY1c Bdl : 264859
Hall A momentum (Tiefenbach) (HALLA:p) : 1060.48
Hall A momentum orbit correction (dpp) : -3.99424e-05
Hall A setup momentum (MMSHLAE) : 1063.12
Hall A energy (halla_MeV) : 1060.48
Hall C energy (hallc_MeV) : 4085.03
Delta(E)/E width (MV_AI_DXWID) : 1.49575
IPM1C12.XPOS : 0
IPM1H04A.XPOS : -0.0328031
IPM1H04A.YPOS : -0.0724668
IPM1H04B.XPOS : 0.0208423
IPM1H04B.YPOS : 1.01089
-----
Wien angle (Vertical) : 88.8235
Wien Vertical BDL (Gcm) : 2152.7
Wien HV Polarity : OFF
Wien electrode Voltage : 55.48
Wien angle (Solenoids) : 90.7456
Wien BDL (First Solenoid) (Gcm) : 876.345
Wien BDL (Second Solenoid) (Gcm) : 876.346
Wien angle (Horizontal) : -51.9996
Wien BDL (Gcm) : -1193.9
Wien HV Polarity (Horizontal) : ON
Wien electrode Voltage (Horizontal) : 32.828
Laser attenuation Hall A : 86
Laser power Hall A : 100
Half-wave plate (off=out) : IN
rotating waveplate : 2350
Beam Half-wave plate (off=out) : IN
-----
Helicity Delay Set : 16 windows
Helicity Pattern Set : Octet
Helicity Clock Set : Free Clock
Helicity Settle Read : 100
Helicity Stable Read : 4067
Helicity Delay Read : 16 windows
Helicity Pattern : Octet
Helicity Clock Read : Free Clock
Helicity Frequency : 239.981
-----
Target : Empty
fan frequency loop 1 : 0
fan frequency loop 3 : 0
Encoder position : 1.33953e+07
Target type : 1.33953e+07
temperature loop 1(1) : 119.99
temperature loop 1(2) : 119.99
temperature loop 1(3) : 119.99
temperature loop 3(1) : 0
temperature loop 3(2) : 0
temperature loop 3(3) : 0
Heat exchange LH2 : 115.3
Heat exchange LH2 : 278.9
HPH H2 loop 1 : 0.0813417
HPH H2 loop 3 : 0.00293052
Left Det/Scint/S0 HV
Upper Quartz : -850.7
Lower Quartz : -751.2
A_T Quartz : -998.3
Upper Scint : -5.8
Lower Scint : -20.5
S0 A : -19
S0 B : -20.4
-----
Det Encoder Position for PREX
Left Main Det x : 1.09131
Left Main Det y : 1.86816
Right Main Det x : HacH_DTC_HPE1313A:0_Ch10 --- Invalid channel name
Right Main Det y : 1.86768
-----
PREX Septum
Current Setpoint(Amps) : 729
Current Readback(Amps) : 725.411
-----