NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 03:40:06 on May 7, 2010
Entry number 321361
keyword=Start_Parity_Run_3557__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=test,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
Beginning-of-Parity-run EPICS data for Run Number 3557 at Fri May 7 03:34:32 EDT 2010
CODA Configuration: Prex
# Timing board information: # Integrate Time = 3.58 ms, Ramp Delay = 400.00 us oversamp 1
Compton Run Number : 22798
-----------------------------------------
Wien angle (Vertical) : -88.0006
Wien Vertical BDL (Gcm) : -2149
Wien HV Polarity : ON
Wien electrode Voltage : 54.966
Wien angle (Solenoids) : 89.7547
Wien BDL (First Solenoid) (Gcm) : 876
Wien BDL (Second Solenoid) (Gcm) : 857
Wien angle (Horizontal) : -51.9996
Wien BDL (Gcm) : -1193.7
Wien HV Polarity (Horizontal) : ON
Wien electrode Voltage (Horizontal) : 32.828
Laser attenuation Hall A : 65
Beam Half-wave plate Set(off=out) : OUT
Beam Half-wave plate Read(off=out) : OUT
Rotating waveplate : 2350
IA Cell Setpoint Hall A : 4.96
IA Cell Setpoint Hall B : 4.99145
IA Cell Setpoint Hall C : 5
PZT X Setpoint Hall A : 4
PZT Y Setpoint Hall A : 4
PZT X Setpoint Common : 4.95
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 7.054
Gun2: PC (PITA) NEG : 8.146
Pockels Cell ON/OFF : ON
Pockels Cell X Stage : -0.05435
Pockels Cell Y Stage : -0.0372
Wager X Stage : 800
Wager Y Stage : 775
Hall A Slit Position : 8
Helicity Clock Set : Free Clock
Helicity Delay Set : 8 windows
Helicity Pattern Set : Octet
Helicity Clock Read : Free Clock
Helicity Settle Read : 100
Helicity Stable Read : 4066.65
Helicity Delay Read : 8 windows
Helicity Pattern Read : Octet
Helicity Frequency : 240.001
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr 90mW
Calculated power in cavity : 0.0286991
Photodiode on table : 0.00435365
Laser X position on QPD 1 : -147.891
Laser Y position on QPD 1 : 326.784
Laser X position on QPD 2 : -438.543
Laser Y position on QPD 2 : -442.532
QPD 1 sum : -0.00366241
QPD 2 sum : -0.00122085
Position set point for adjustable
mirror 1 (either x or y) : 8745[c]
Position set point for adjustable
mirror 2 (either x or y) : 104660[c]
Laser minimum temperature (35.8) : 32.2
Laser temperature set point : +47.409
Polarisation in cavity : RIGHT
Reflection photodiode : 0.0579869
Gain of locking servo : 100
Tracking level (V) of locking servo : 0.3
Slow locking signal sent to laser : 0.148324
Fast locking signal sent to laser : 9.56784
Calculated polarisation in cavity : 18.867
Photodiode 1 after Wollaston prism : 0.00174342
Photodiode 2 after Wollaston prism : 0.0022674
Step size for RHWP scan : 250
Laser temp slow ramp (1 = on) : ON
Speed of laser temp slow ramp up : 0.015
Speed of laser temp slow ramp down : 0.015
-----------------------------------------
Left Arm Magnets
-----------------------------------------
Left Arm Q1 power supply current : 582.078
Left Arm Q1 momentum : HacL_Q1_P0rb --- Invalid channel name
Left Arm Q1 gauss meter : HacL_Q1_LS450:FLD_DATA --- Invalid channel name
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : HacL_Q2_HP3458A:IOUT --- Invalid channel name
Left Arm Q2 momentum : HacL_Q2_P0rb --- Invalid channel name
Left Arm Q2 gauss meter : HacL_Q2_LS450:FLD_DATA --- Invalid channel name
Left Arm Q2 power supply polarity : HacL_VMIC1182:0_Ch17 --- Invalid channel name
Left Arm D1 power supply current : HacL_D1_HP3458A:IOUT --- Invalid channel name
Left Arm D1 momentum : HacL_D1_P0rb --- Invalid channel name
Left Arm D1 NMR : HacL_D1_NMR:SIG --- Invalid channel name
Left Arm Q3 power supply current : HacL_Q3_HP3458A:IOUT --- Invalid channel name
Left Arm Q3 momentum : HacL_Q3_P0rb --- Invalid channel name
Left Arm Q3 gauss meter : HacL_Q3_LS450:FLD_DATA --- Invalid channel name
Left Arm Q3 power supply polarity : HacL_VMIC1182:0_Ch26 --- Invalid channel name
-----------------------------------------
Right Arm Magnets
-----------------------------------------
Right Arm Q1 power supply current : 581.971
Right Arm Q1 momentum : HacR_Q1_P0rb --- Invalid channel name
Right Arm Q1 gauss meter : HacR_Q1_LS450:FLD_DATA --- Invalid channel name
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : HacR_Q2_HP3458A:IOUT --- Invalid channel name
Right Arm Q2 momentum : HacR_Q2_P0rb --- Invalid channel name
Right Arm Q2 gauss meter : HacR_Q2_LS450:FLD_DATA --- Invalid channel name
Right Arm Q2 power supply polarity : HacR_VMIC1182:0_Ch17 --- Invalid channel name
Right Arm D1 power supply current : HacR_D1_HP3458A:IOUT --- Invalid channel name
Right Arm D1 momentum : HacR_D1_P0rb --- Invalid channel name
Right Arm D1 NMR : HacR_D1_NMR:SIG --- Invalid channel name
Right Arm Q3 power supply current : HacR_Q3_HP3458A:IOUT --- Invalid channel name
Right Arm Q3 momentum : HacR_Q3_P0rb --- Invalid channel name
Right Arm Q3 gauss meter : HacR_Q3_LS450:FLD_DATA --- Invalid channel name
Right Arm Q3 power supply polarity : HacR_VMIC1182:0_Ch26 --- Invalid channel name
-----------------------------------------
VDC Currents & Voltages
-----------------------------------------
Left Arm Top VDC Current : HrsH_VDC_rCURTop --- Invalid channel name
Left Arm Bottom VDC Current : HrsH_VDC_rCURBot --- Invalid channel name
Right Arm Top VDC Current : HRSE_DTECTR_HPE1313A:0_Ch1 --- Invalid channel name
Right Arm Bottom VDC Current : HRSE_DTECTR_HPE1313A:0_Ch3 --- Invalid channel name
Left Arm Top VDC voltage : HrsH_VDC_rHVTop --- Invalid channel name
Left Arm Bottom VDC voltage : HrsH_VDC_rHVBot --- Invalid channel name
Right Arm Top VDC voltage : HRSE_DTECTR_HPE1313A:0_Ch0 --- Invalid channel name
Right Arm Bottom VDC voltage : HRSE_DTECTR_HPE1313A:0_Ch2 --- Invalid channel name
-----------------------------------------
HallA & Injector BCMs and Energy
-----------------------------------------
Average current of the two cavities : 0.0247086
Current on Unser monitor : 20.0542
Current on Upstream bcm : 0.0359913
Current on Downstream bcm : 0.0134258
Upstream Cavity Coefficient : 52.95
Downstream Cavity Coefficient : 44.77
Current on IBC0L02 (source) : 0.00117618
Tiefenbach Hall A energy : 1060.52
Tiefenbach Hall C energy : 5092.65
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c Hall A Beam energy : 1061.34
MBSY3c Hall C Beam energy : 5108.4
MBSY1c magnet current (amp) : 1.33514e-05
MBSY1c Bdl : 264859
-----------------------------------------
ARC stuff and Raster
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 9
Raster Y width : 6.6
-----------------------------------------
Target BPMs
-----------------------------------------
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpm4A : 0.24
Survey Y offset bpm4A : 0.36
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : 1
Survey X offset bpm12 : 0
Survey Y offset bpm12 : 0
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
Left Arm Collimator
-----------------------------------------
Left Arm Collimator : HacL_COL:ENC --- Invalid channel name
HacL_HPE1313A:0_Ch58 : HacL_HPE1313A:0_Ch58 --- Invalid channel name
HacL_HPE1313A:0_Ch55 : HacL_HPE1313A:0_Ch55 --- Invalid channel name
HacL_HPE1313A:0_Ch54 : HacL_HPE1313A:0_Ch54 --- Invalid channel name
Left Arm Angle Floor Angle : HacL_AglMrk --- Invalid channel name
Left Arm Angle Vernier : HacL_AglVrn --- Invalid channel name
Left Arm Scattering Angle : HacL_alignAGL --- Invalid channel name
-----------------------------------------
Right Arm Collimator
-----------------------------------------
Right Arm Collimator : HacR_COL:ENC --- Invalid channel name
HacR_HPE1313A:0_Ch58 : HacR_HPE1313A:0_Ch58 --- Invalid channel name
HacR_HPE1313A:0_Ch55 : HacR_HPE1313A:0_Ch55 --- Invalid channel name
HacR_HPE1313A:0_Ch54 : HacR_HPE1313A:0_Ch54 --- Invalid channel name
Right Arm Angle Floor Angle : HacR_AglMrk --- Invalid channel name
Right Arm Angle Vernier : HacR_AglVrn --- Invalid channel name
Right Arm Scattering Angle : HacR_alignAGL --- Invalid channel name
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
Target : Pb Diamond #3
Encoder position : 26503736
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
temperature loop 1-1 : 119.99
temperature loop 1-2 : 119.99
temperature loop 1-3 : 119.99
temperature loop 2-1 : 100.09
temperature loop 2-2 : 95.14
temperature loop 2-3 : 119.99
temperature loop 3-1 : 0
temperature loop 3-2 : 0
temperature loop 3-3 : 0
pressure fill target H2 : 15.5779
pressure fill bottle H2 : 14.3313
pressure ballast H2 : 23.8743
pressure exhaust H2 : 14.8791
cryogen input temp : 213.8
crogen return flow : 7.16372
JT valve setting : 0.244141
-----------------------------------------
PREX Left arm Det/Scint/S0 HV
-----------------------------------------
Upper Quartz : -960.5
Lower Quartz : -901
A_T Quartz : -1197.5
Upper Scint : -1400.2
Lower Scint : -20.5
S0 A : -21.3
S0 B : -21.9
-----------------------------------------
PREX Det Encoder Positions
-----------------------------------------
Left Main Det x : HacH_DTC_HPE1313A:0_Ch35 --- Invalid channel name
Left Main Det y : HacH_DTC_HPE1313A:0_Ch32 --- Invalid channel name
Right Main Det x : HRSE_DTECTR_HPE1313A:0_Ch10 --- Invalid channel name
Right Main Det y : HRSE_DTECTR_HPE1313A:0_Ch7 --- Invalid channel name
-----------------------------------------
PREX A_T Encoder Positions
-----------------------------------------
Left A_T Det x : HacH_DTC_HPE1313A:0_Ch33 --- Invalid channel name
Left A_T Det y : HacH_DTC_HPE1313A:0_Ch34 --- Invalid channel name
Right A_T Det x : HRSE_DTECTR_HPE1313A:0_Ch9 --- Invalid channel name
Right A_T Det y : HRSE_DTECTR_HPE1313A:0_Ch8 --- Invalid channel name
-----------------------------------------
PREX Septum Currents
-----------------------------------------
Current Setpoint(Amps) : 729
Current Readback(Amps) : 725.411
-----------------------------------------
Parameters used for HAPPEX feedback
-----------------------------------------
Parity DAQ Feedback Control (ON=1) : 1
anatype fdbk
curmon bcm3
feedback PITA on 8 bcm3
PITAparam slope 800
feedback IA off 2 bcm3
feedback PZT off 20 bpm4b
ncuts 6
cutnames Low_beam Beam_burp Evt_seq Pair_seq Startup Adcx_DAC_burp
extlo 10 10 25 25 0 10
exthi 1200 40 25 25 0 10
#
# command to log run in database (should already have been done)\n
/adaqfs/home/apar/PREX/runlistDB/addRun2runlist.pl -r 3557 -d '2010-05-07 03:34:23' -t 26503736 -s OUT