Log entry time 00:44:12 on June 7,2010

Entry number 325009

I updated the bpms/bcm pedestals for IT 3110.
pedestal run # 4351.

Since bcm5r correlations to either bcm1r or bcm3r were not linear on both the 
hi/low values, I used bcm3 as reference for all these pedestals.

bcm3r: 870 (beam off value)

Typical plot command:  
R->Draw("bcm1r:bcm3r-870","ev_num>10&&!cond_adcx_dac_burp&&bcm3r>50e3","prof")

Pedestals:
bcm1r: -3289
bcm2r: 5043
bcm6r: 1948
bcm7r: 2198
bcm10r: 2637
bcm11r: 2071

bpm4a (xp,xm,yp,ym): 
ped adcx 10 chan 0 value 16392.81 
ped adcx 10 chan 1 value 15831.31 
ped adcx 10 chan 2 value 21278.15 
ped adcx 10 chan 3 value 22437.94 

bpm4b (xp,xm,yp,ym): 
ped adcx 19 chan 0 value 19980.05 
ped adcx 19 chan 1 value 16490.39 
ped adcx 19 chan 2 value 16095.05 
ped adcx 19 chan 3 value 15551.28 

bpm8 (xp,xm,yp,ym): 
ped adcx 9 chan 0 value 3219.25 
ped adcx 9 chan 1 value 3245.02 
ped adcx 9 chan 2 value 1762.69 
ped adcx 9 chan 3 value 1843.18 

bpm12 (xp,xm,yp,ym):
ped adcx 1 chan 0 value 12863.58 
ped adcx 1 chan 1 value 11212.11 
ped adcx 1 chan 2 value 12427.99 
ped adcx 1 chan 3 value 13683.19 

bpm14 (xp,xm,yp,ym):
ped adc 11 chan 0 value 5653.52 
ped adc 11 chan 1 value 5534.46 
ped adc 11 chan 2 value 5536.77 
ped adc 11 chan 3 value 5650.26 

For the det pedestals I used run # 4356.
(run# 4351 is useless for det ped calibration 
since the target is empty, and there is no beam
on the dets.)

Typical plot command
M->Draw("avg_det1:avg_bcm3>>htemp","m_ev_num>60e3","prof")

Pedestals:

det 1/2,flumi1:
ped adcx 5 chan 0 value 205
ped adcx 5 chan 1 value 37
ped adcx 5 chan 2 value -24

det 3/4,flumi2:
ped adcx 4 chan 0 value -133
ped adcx 4 chan 1 value -140
ped adcx 4 chan 2 value -381