NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 14:36:43 on June 22, 2010
Entry number 328037
keyword=Start_Parity_Run_4815__CODA_Config=CHInj2_Run_type=Test,beam_current=70,beam_energy=1.063,beam_polarization=90,beam_raster=off,comment_text=Injector Studies: Hall C Laser, analyzer in, PITA 0, RHWP scan,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
Beginning-of-Parity-run EPICS data for Run Number 4815 at Tue Jun 22 14:35:51 EDT 2010
CODA Configuration: CHInj2
# Timing board information: # Integrate Time = 7.78 ms, Ramp Delay = 100.00 us oversamp 1
Compton Run Number : 23246
-----------------------------------------
Wien angle (Vertical) : 88.8235
Wien Vertical BDL (Gcm) : 2147.9
Wien HV Polarity : OFF
Wien electrode Voltage : 55.48
Wien angle (Solenoids) : -89.7547
Wien BDL (First Solenoid) (Gcm) : -876
Wien BDL (Second Solenoid) (Gcm) : -857
Wien angle (Horizontal) : -51.9996
Wien BDL (Gcm) : -1198.8
Wien HV Polarity (Horizontal) : ON
Wien electrode Voltage (Horizontal) : 32.828
Laser attenuation Hall A : 60
Beam Half-wave plate Set(off=out) : IN
Beam Half-wave plate Read(off=out) : IN
Rotating waveplate : 0
IA Cell Setpoint Hall A : 4.96
IA Cell Setpoint Hall B : 4.9768
IA Cell Setpoint Hall C : 5
PZT X Setpoint Hall A : 4
PZT Y Setpoint Hall A : 4
PZT X Setpoint Common : 4.95
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 7
Gun2: PC (PITA) NEG : 5.5
Pockels Cell ON/OFF : ON
Pockels Cell X Stage : -0.0634
Pockels Cell Y Stage : 0.02015
Wager X Stage : 625
Wager Y Stage : 675
Hall A Slit Position : -1
Helicity Clock Set : Free Clock
Helicity Delay Set : 8 windows
Helicity Pattern Set : Quartet
Helicity Clock Read : Free Clock
Helicity Settle Read : 100
Helicity Stable Read : 8233.35
Helicity Delay Read : 8 windows
Helicity Pattern Read : Quartet
Helicity Frequency : 120
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr 21mW
Calculated power in cavity : 0.052469
Photodiode on table : 335.199
Laser X position on QPD 1 : -147.891
Laser Y position on QPD 1 : -163.404
Laser X position on QPD 2 : -2.15588e+07
Laser Y position on QPD 2 : 7.25044e+06
QPD 1 sum : -0.00366241
QPD 2 sum : 0.0012207
Position set point for adjustable
mirror 1 (either x or y) : 9595[c]
Position set point for adjustable
mirror 2 (either x or y) : -34325[c]
Laser minimum temperature (35.8) : 32.201
Laser temperature set point : +47.200
Polarisation in cavity : RIGHT
Reflection photodiode : 0.0421168
Gain of locking servo : 120
Tracking level (V) of locking servo : 0.72
Slow locking signal sent to laser : 0.151987
Fast locking signal sent to laser : 8.03699
Calculated polarisation in cavity : 1.93008
Photodiode 1 after Wollaston prism : 0.00392774
Photodiode 2 after Wollaston prism : 0.003779
Step size for RHWP scan : 10625
Laser temp slow ramp (1 = on) : OFF
Speed of laser temp slow ramp up : 0.015
Speed of laser temp slow ramp down : 0.015
-----------------------------------------
Left Arm Magnets
-----------------------------------------
Left Arm Q1 power supply current : 10.8415
Left Arm Q1 momentum : 0.012068
Left Arm Q1 gauss meter : 0.0010803
Left Arm Q1 power supply polarity : 0
Left Arm Q2 power supply current : 6.88908
Left Arm Q2 momentum : 0.0191819
Left Arm Q2 gauss meter : 0.004513
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 8.08502
Left Arm D1 momentum : 0.0328592
Left Arm D1 NMR : 0.239366
Left Arm Q3 power supply current : 11.1223
Left Arm Q3 momentum : 0.0326674
Left Arm Q3 gauss meter : -0.0057639
Left Arm Q3 power supply polarity : disabled
-----------------------------------------
Right Arm Magnets
-----------------------------------------
Right Arm Q1 power supply current : 11.4824
Right Arm Q1 momentum : 0.00936904
Right Arm Q1 gauss meter : 0.0001606
Right Arm Q1 power supply polarity : 0
Right Arm Q2 power supply current : 9.82707
Right Arm Q2 momentum : 0.023305
Right Arm Q2 gauss meter : 0.005256
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 13.7573
Right Arm D1 momentum : 0.0321887
Right Arm D1 NMR : 0.166092
Right Arm Q3 power supply current : 10.0827
Right Arm Q3 momentum : 0.0281932
Right Arm Q3 gauss meter : 0.004737
Right Arm Q3 power supply polarity : disabled
-----------------------------------------
VDC Currents & Voltages
-----------------------------------------
Left Arm Top VDC Current : 1.46484
Left Arm Bottom VDC Current : 1.5625
Right Arm Top VDC Current : -1.80664
Right Arm Bottom VDC Current : -1.46484
Left Arm Top VDC voltage : 0.0185547
Left Arm Bottom VDC voltage : 0.0180664
Right Arm Top VDC voltage : -0.0131836
Right Arm Bottom VDC voltage : -0.0131836
-----------------------------------------
HallA & Injector BCMs and Energy, FFB Variables
-----------------------------------------
Average current of the two cavities : 0.0268734
Current on Unser monitor : 22.5327
Current on Upstream bcm : 0.0379514
Current on Downstream bcm : 0.015779
Upstream Cavity Coefficient : 52.95
Downstream Cavity Coefficient : 44.77
Current on IBC0L02 (source) : 0.477063
Tiefenbach Hall A energy : 2263.56
Tiefenbach Hall C energy : 1159.7
Delta(E)/E width (MV_AI_DXWID) : 4.1707
MBSY1c Hall A Beam energy : 2266.3
MBSY3c Hall C Beam energy : 1162.15
MBSY1c magnet current (amp) : 0.0377197
MBSY1c Bdl : 565557
FB ON, Standby, Pause status : 0
Gain OK or Gain Fail status : 1
Absolute or Relative mode : absolute
RF gain high/low : Low
Gain mode: manual, automatic : manual
-----------------------------------------
ARC stuff and Raster
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 23
Raster Y width : 9.5
-----------------------------------------
Target BPMs
-----------------------------------------
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpm4A : 0.24
Survey Y offset bpm4A : 0.36
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : 1
Survey X offset bpm12 : 0
Survey Y offset bpm12 : 0
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
Left Arm Collimator
-----------------------------------------
Left Arm Collimator : 0.00185547
HacL_HPE1313A:0_Ch58 : -0.308594
HacL_HPE1313A:0_Ch55 : 22.9004
HacL_HPE1313A:0_Ch54 : -0.0390625
Left Arm Angle Floor Angle : 0
Left Arm Angle Vernier : 0
Left Arm Scattering Angle : -0.179
-----------------------------------------
Right Arm Collimator
-----------------------------------------
Right Arm Collimator : -0.00112305
HacR_HPE1313A:0_Ch58 : -0.692383
HacR_HPE1313A:0_Ch55 : 21.875
HacR_HPE1313A:0_Ch54 : -1.03613
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
Target : Pb Diamond #1
Encoder position : 30087738
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
temperature loop 1-1 : 119.99
temperature loop 1-2 : 119.99
temperature loop 1-3 : 119.99
temperature loop 2-1 : 100.09
temperature loop 2-2 : 95.14
temperature loop 2-3 : 119.99
temperature loop 3-1 : 0
temperature loop 3-2 : 0
temperature loop 3-3 : 0
pressure fill target H2 : 16.0388
pressure fill bottle H2 : 14.2535
pressure ballast H2 : 22.9129
pressure exhaust H2 : 15.0423
cryogen input temp : 299.5
crogen return flow : 0
JT valve setting : -0.195312
-----------------------------------------
PREX Left arm Det/Scint/S0 HV
-----------------------------------------
Upper Quartz : -14
Lower Quartz : -16.8
A_T Quartz : -15.7
Upper Scint : -1400.2
Lower Scint : -19.7
S0 A : -21.3
S0 B : -22.7
-----------------------------------------
PREX Det Encoder Positions
-----------------------------------------
Left Main Det x : 0.059082
Left Main Det y : 0.222168
Right Main Det x : 0.530762
Right Main Det y : 2.22559
-----------------------------------------
PREX A_T Encoder Positions
-----------------------------------------
Left A_T Det x : 0.140625
Left A_T Det y : 0.102539
Right A_T Det x : 0.837891
Right A_T Det y : 1.32178
-----------------------------------------
PREX Septum Currents
-----------------------------------------
Current Setpoint(Amps) : 0
Current Readback(Amps) : 0
-----------------------------------------
Moeller Magnet Currents
-----------------------------------------
Moeller ON/OFF : disabled
MQM1H02 Setpoint(Amps) : 77.5494
MQM1H02 Readback(Amps) : 76.315
MQO1H03 Setpoint(Amps) : 1.33226
MQO1H03 Readback(Amps) : 2.09524
MQO1H03A Setpoint(Amps) : -80.9597
MQO1H03A Readback(Amps) : -79.6191
MMA1H01 Setpoint(Amps) : 0
MMA1H01 Readback(Amps) : 0
-----------------------------------------
Parameters used for HAPPEX feedback
-----------------------------------------
Parity DAQ Feedback Control (ON=1) : 1
anatype fdbk
curmon bcm3
posmone bpm12x
feedback PITA on 4 bcm3
PITAparam slope -574
feedback IA off 2 bcm3
feedback PZT off 20 bpm12x
ncuts 7
cutnames Low_beam Beam_burp Evt_seq Pair_seq Startup Adcx_DAC_burp Pos_burp_E
extlo 10 10 25 25 0 10 50
exthi 1200 40 25 25 0 10 100
#
# command to log run in database (should already have been done)\n
/adaqfs/home/apar/PREX/runlistDB/addRun2runlist.pl -r 4815 -d '2010-06-22 14:35:43' -t 30087738 -s IN