• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name a-onl

    Log entry time 14:27:51 on June 26, 2010

    Entry number 328427

    keyword=Start_Run_1147,Run_type=Check out,target_type=Lead/Diamond 1 (top),beam_e0=1.063,beam_raster=on,beam_current=.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
    Run Timestamp:       Sat Jun 26 14:26:55 EDT 2010
    Beginning-of-run EPICS data for Run Number 1147 at Sat Jun 26 14:27:33 EDT 2010
    
    
    
    Run_type=Check out
    target_type=Lead/Diamond 1 (top)
    beam_e0=1.063
    beam_raster=on
    beam_current=.05
    leftarm_p=1.063
    leftarm_theta=5.0
    leftarm_sieve=out
    rightarm_p=1.063
    rightarm_theta=5.0
    rightarm_sieve=out
    comment_text=
    
    
    ; HRS DAQ on adaql2/a-onl account
    ; Prescale factors (integer), downloaded each run at prestart.
    ; Change this file only in-between runs.
    ; Maxima: (2^24)-1 = 16777215 for T1-T4 and 65535 for T5-T8
    ; The default factor is essentially infinite.
    ; T1 = R-HRS S0 trigger
    ; T2 = R-HRS S2 trigger 
    ; T3 = nothing
    ; T4 = nothing
    ; T5 = upper scint trigger.
    ; T6 = nothing
    ; T7 = lower quartz detector
    ; T8 = 1024 Hz p1ulser
    ; String should be one line, no spaces, ending in carriage return
    ; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
    
    
    ps1=4,ps2=16777215,ps3=16777215,ps4=16777215,ps5=65535,ps6=65535,ps7=65535,ps8=65535
    
    
    
    
    
    Left Arm Q1 momentum : 0.800017
    Left Arm Q1 power supply : 400.763
    Left Arm Q1 gauss meter : -0.0335
    Left Arm Q2 power supply current : 326.956
    Left Arm Q2 momentum : 0.800184
    Left Arm Q2 gauss meter : 0.17218
    Left Arm Q2 power supply polarity : disabled
    Left Arm D1 power supply current : 264.392
    Left Arm D1 momentum : 0.799993
    Left Arm D1 NMR : 0.296232
    Left Arm Q3 power supply current : 384.263
    Left Arm Q3 momentum : 0.800151
    Left Arm Q3 gauss meter : -0.194592
    Left Arm Q3 power supply polarity : disabled
    Left Arm B Field Hall Probe (D-G) : -0.2856
    -----
    Right Arm Q1 momentum : 0.00669671
    Right Arm Q1 power supply : 1.28176
    Right Arm Q1 gauss meter : -0.0001463
    Right Arm Q2 power supply current : 0.00315757
    Right Arm Q2 momentum : 0.000685495
    Right Arm Q2 gauss meter : 0.0001351
    Right Arm Q2 power supply polarity : enabled
    Right Arm D1 power supply current : 1.90588
    Right Arm D1 momentum : 0.00697136
    Right Arm D1 NMR : 0.166108
    Right Arm Q3 power supply current : -0.000130771
    Right Arm Q3 momentum : -4.65519e-08
    Right Arm Q3 gauss meter : 0.0002605
    Right Arm Q3 power supply polarity : enabled
    Right Arm B Field Hall Probe (D-G) : -0.002552
    -----
    Left Arm Top VDC Current : -1.31836
    Left Arm Bottom VDC Current : 3.61328
    Left Arm Top VDC voltage : 3.50391
    Left Arm Bottom VDC voltage : 3.49951
    -----
    Right Arm Top VDC Current : -1.80664
    Right Arm Bottom VDC Current : -1.46484
    Right Arm Top VDC voltage : -0.0078125
    Right Arm Bottom VDC voltage : -0.00830078
    -----
    Average current of the two cavities : 0.0274783
    Current on Unser monitor : 22.3537
    Current on Upstream bcm : 0.0412687
    Current on Downstream bcm : 0.0136878
    Upstream Cavity Coefficient : 52.95
    Downstream Cavity Coefficient : 44.77
    Current on IBC0L02 (source) : 0.016789
    Hall C Current : 0
    Hall A momentum (Tiefenbach) (HALLA:p) : 1160.97
    Hall A momentum orbit correction (dpp) : 0
    Hall A setup momentum (MMSHLAE) : 1161.88
    Hall A energy (halla_MeV) : 1160.97
    Hall C energy (hallc_MeV) : 2257.17
    Delta(E)/E width (MV_AI_DXWID) : 6.36303
    MBSY1c magnet current (amp) : 0.0377197
    MBSY1c Bdl : 289952
    Arc1 dp/p : 0
    Arc2 dp/p : 0
    Raster X width : 1
    Raster Y width : 5
    -----
    HacL_HPE1313A:0_Ch58 : -0.304688
    HacL_HPE1313A:0_Ch55 : 22.9004
    HacL_HPE1313A:0_Ch54 : -0.0366211
    Left Arm Angle Floor Angle : 0
    Left Arm Angle Vernier : 0
    Left Arm Scattering Angle : -0.179
    -----
    Right Arm D1 momentum : 0.00695501
    Right Arm arm angle : 0.197
    -----
    Left VDC -DISC LVL Top : -0.00830078
    Left VDC -DISC LVL Bottom : 0
    Left VDC -DISC LVL Voltage1 : -0.00683594
    Left VDC -DISC LVL Voltage2 : -0.00634766
    -----
    Right Arm Arm Collimator : -0.0090332
    HacR_HPE1313A:0_Ch58 : -0.712891
    HacR_HPE1313A:0_Ch55 : 21.8262
    HacR_HPE1313A:0_Ch54 : -1.0415
    Right Arm Angle Floor Angle : 0
    Right Arm Angle Vernier : 0
    Right Arm Scattering Angle : 0.197
    -----
    IPM1C12.XPOS : 0
    IPM1C12.YPOS : 0
    IPM1H04A.XPOS : 0
    IPM1H04A.YPOS : 0
    IPM1H04B.XPOS : 0
    IPM1H04B.YPOS : 0
    Survey X offset bpmA : 0.24
    Survey Y offset bpmA : 0.36
    Survey X offset bpmB : 0.77
    Survey Y offset bpmB : 1
    -----
    Wien angle (Vertical) : 88.8235
    Wien Vertical BDL (Gcm) : 2147.9
    Wien HV Polarity : OFF
    Wien electrode Voltage : 55.48
    Wien angle (Solenoids) : -89.7547
    Wien BDL (First Solenoid) (Gcm) : -876
    Wien BDL (Second Solenoid) (Gcm) : -857
    Wien angle (Horizontal) : -51.9996
    Wien BDL (Gcm) : -1198.62
    Wien HV Polarity (Horizontal) : ON
    Wien electrode Voltage (Horizontal) : 32.828
    Laser attenuation Hall A : 60
    Laser power Hall A : 100
    Half-wave plate (off=out) : IN
    rotating waveplate : 2000
    Beam Half-wave plate (off=out) : IN
    -----
    Helicity Delay Set : 8 windows
    Helicity Pattern Set : Quartet
    Helicity Clock Set : Free Clock
    Helicity Settle Read : 60
    Helicity Stable Read : 1000
    Helicity Delay Read : 8 windows
    Helicity Pattern : Quartet
    Helicity Clock Read : Free Clock
    Helicity Frequency : 943.396
    -----
    Target : Optics
    fan frequency loop 1 : 0
    fan frequency loop 2 : 0
    fan frequency loop 3 : 0
    Encoder position : 3.44669e+07
    Target type : 3.44669e+07
    temperature loop 1(1) : 119.99
    temperature loop 1(2) : 119.99
    temperature loop 1(3) : 119.99
    Heat exchange loop 1 H2 : 115.3
    temperature loop 3(1) : 0
    temperature loop 3(2) : 0
    temperature loop 3(3) : 0
    Heat exchange loop 3 H2 : 278.9
    pressure loop He : 43.1842
    pressure loop H2 before : 15.8785
    pressure loop H2 return :
    HPH He loop 1 : 0.0813417
    HPH He loop 2 : 0.00710569
    HPH H2 loop 3 : 0.00634721
    Left Det/Scint/S0 HV
    Upper Quartz : -1486
    Lower Quartz : -1531.1
    A_T Quartz : -1545.8
    Upper Scint : -11.1
    Lower Scint : -21.3
    S0 A : -901.6
    S0 B : -901.9
    -----
    Det Encoder Position for PREX
    Left Main Det x : 0.0185547
    Left Main Det y : 0.0292969
    Right Main Det x : HacH_DTC_HPE1313A:0_Ch10 --- Invalid channel name
    Right Main Det y : 0.00830078
    -----
    PREX Septum
    Current Setpoint(Amps) : 548.636
    Current Readback(Amps) : 0
    -----
    # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Voltage
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MV
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
    # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Current
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MC
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
    # Map  usage:  Measured Voltage
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  usage:  Measured Current
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  HV_  Measured Voltage
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MV
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: 5555
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D HV_ -c GET -P MV
    # Map  HV_  Measured Current
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MC
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: 5555
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D HV_ -c GET -P MC
    # Map  HV_Port  Measured Voltage
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MV
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: 5555
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D HV_Port -c GET -P MV
    # Map  HV_Port  Measured Current
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MC
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: 5555
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D HV_Port -c GET -P MC
    # Map  'command_message'  Measured Voltage
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  'command_message'  Measured Current
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  Examples:  Measured Voltage
     *** Map name 1:,1:  is missing or not properly set in the server list :
    
    
    /adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe. 
    usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
    
      HV_ hostname - name(or IP address) of HV mainframe  
      HV_Port      - number of HV port for TCP/IP connetction(1090 default) 
      'command_message' - message for sending to HV mainframe(string with quotas)
    
    Examples: 
     Send command to HV mainframe 'hallahv1':
              /adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090  -m 'LD L0.1 DV -1000.' 
     Send command to control program running on 'adaqel1'
     for setup voltage on HVframe 0:
              /adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555  -m '0 LD L0.1 DV -1000.' 
     Error(2) in information retrieval in  -D Examples: -c GET -P MV
    # Map  Examples:  Measured Current
     *** Map name 1:,1:  is missing or not properly set in the server list :
    
    
    /adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe. 
    usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
    
      HV_ hostname - name(or IP address) of HV mainframe  
      HV_Port      - number of HV port for TCP/IP connetction(1090 default) 
      'command_message' - message for sending to HV mainframe(string with quotas)
    
    Examples: 
     Send command to HV mainframe 'hallahv1':
              /adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090  -m 'LD L0.1 DV -1000.' 
     Send command to control program running on 'adaqel1'
     for setup voltage on HVframe 0:
              /adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555  -m '0 LD L0.1 DV -1000.' 
     Error(2) in information retrieval in  -D Examples: -c GET -P MC
    # Map  Send  Measured Voltage
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  Send  Measured Current
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Voltage
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MV
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
    # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Current
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MC
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
    # Map  Send  Measured Voltage
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  Send  Measured Current
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  for  Measured Voltage
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  for  Measured Current
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Voltage
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MV
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
    # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Current
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MC
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
    CODA config : config LeftHrs LeftNoGem
    HAPPEX run : 4816