NEXT
Make New Entry,
Make Followup Entry
User name a-onl
Log entry time 21:15:23 on June 26, 2010
Entry number 328519
keyword=Start_Run_1178,Run_type=Optics,target_type=Optics,beam_e0=1.162,beam_raster=on,beam_current=2,leftarm_p=1.1383,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=0,rightarm_theta=5.0,rightarm_sieve=out,comment_text=delta = -2%, raster size 5x2
Run Timestamp: Sat Jun 26 21:14:28 EDT 2010
Beginning-of-run EPICS data for Run Number 1178 at Sat Jun 26 21:15:04 EDT 2010
Run_type=Optics
target_type=Optics
beam_e0=1.162
beam_raster=on
beam_current=2
leftarm_p=1.1383
leftarm_theta=5.0
leftarm_sieve=sieve
rightarm_p=0
rightarm_theta=5.0
rightarm_sieve=out
comment_text=delta = -2%, raster size 5x2
; HRS DAQ on adaql2/a-onl account
; Prescale factors (integer), downloaded each run at prestart.
; Change this file only in-between runs.
; Maxima: (2^24)-1 = 16777215 for T1-T4 and 65535 for T5-T8
; The default factor is essentially infinite.
; T1 = R-HRS S0 trigger
; T2 = R-HRS S2 trigger
; T3 = nothing
; T4 = nothing
; T5 = upper scint trigger.
; T6 = nothing
; T7 = lower quartz detector
; T8 = 1024 Hz p1ulser
; String should be one line, no spaces, ending in carriage return
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
ps1=30,ps2=16777215,ps3=16777215,ps4=16777215,ps5=65535,ps6=65535,ps7=65535,ps8=65535
Left Arm Q1 momentum : 1.13815
Left Arm Q1 power supply : 570.222
Left Arm Q1 gauss meter : -0.04772
Left Arm Q2 power supply current : 465.08
Left Arm Q2 momentum : 1.13822
Left Arm Q2 gauss meter : 0.2447
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 378.404
Left Arm D1 momentum : 1.13827
Left Arm D1 NMR : 0.421387
Left Arm Q3 power supply current : 546.666
Left Arm Q3 momentum : 1.13832
Left Arm Q3 gauss meter : -0.27617
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.4063
-----
Right Arm Q1 momentum : 0.00717391
Right Arm Q1 power supply : 1.12154
Right Arm Q1 gauss meter : -0.0001551
Right Arm Q2 power supply current : 0.00347185
Right Arm Q2 momentum : 0.000681517
Right Arm Q2 gauss meter : 0.0001358
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 1.90462
Right Arm D1 momentum : 0.00657619
Right Arm D1 NMR : 0.166115
Right Arm Q3 power supply current : 8.96713e-05
Right Arm Q3 momentum : -3.49139e-07
Right Arm Q3 gauss meter : 0.0002615
Right Arm Q3 power supply polarity : enabled
Right Arm B Field Hall Probe (D-G) : -0.002412
-----
Left Arm Top VDC Current : 0.830078
Left Arm Bottom VDC Current : 3.71094
Left Arm Top VDC voltage : 3.50195
Left Arm Bottom VDC voltage : 3.50098
-----
Right Arm Top VDC Current : -1.66016
Right Arm Bottom VDC Current : -1.51367
Right Arm Top VDC voltage : -0.00634766
Right Arm Bottom VDC voltage : -0.00732422
-----
Average current of the two cavities : 2.29593
Current on Unser monitor : 25.6699
Current on Upstream bcm : 2.42683
Current on Downstream bcm : 2.16502
Upstream Cavity Coefficient : 52.95
Downstream Cavity Coefficient : 44.77
Current on IBC0L02 (source) : 2.54346
Hall C Current : 0
Hall A momentum (Tiefenbach) (HALLA:p) : 1160.96
Hall A momentum orbit correction (dpp) : -5.88773e-06
Hall A setup momentum (MMSHLAE) : 1161.88
Hall A energy (halla_MeV) : 1160.96
Hall C energy (hallc_MeV) : 2257.17
Delta(E)/E width (MV_AI_DXWID) : 5.73543
MBSY1c magnet current (amp) : 48.1354
MBSY1c Bdl : 289952
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 5
Raster Y width : 2
-----
HacL_HPE1313A:0_Ch58 : -0.304688
HacL_HPE1313A:0_Ch55 : 22.9004
HacL_HPE1313A:0_Ch54 : -0.0375977
Left Arm Angle Floor Angle : 0
Left Arm Angle Vernier : 0
Left Arm Scattering Angle : -0.179
-----
Right Arm D1 momentum : 0.00654348
Right Arm arm angle : 0.197
-----
Left VDC -DISC LVL Top : -0.0078125
Left VDC -DISC LVL Bottom : -0.00146484
Left VDC -DISC LVL Voltage1 : -0.00732422
Left VDC -DISC LVL Voltage2 : -0.00732422
-----
Right Arm Arm Collimator : -0.00869141
HacR_HPE1313A:0_Ch58 : -0.713379
HacR_HPE1313A:0_Ch55 : 21.9238
HacR_HPE1313A:0_Ch54 : -1.04102
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----
IPM1C12.XPOS : -0.00212365
IPM1C12.YPOS : -0.0286428
IPM1H04A.XPOS : 0.0487341
IPM1H04A.YPOS : 0.075259
IPM1H04B.XPOS : 0.00927287
IPM1H04B.YPOS : 0.608913
Survey X offset bpmA : 0.24
Survey Y offset bpmA : 0.36
Survey X offset bpmB : 0.77
Survey Y offset bpmB : 1
-----
Wien angle (Vertical) : 88.8235
Wien Vertical BDL (Gcm) : 2147.9
Wien HV Polarity : OFF
Wien electrode Voltage : 55.48
Wien angle (Solenoids) : -89.7547
Wien BDL (First Solenoid) (Gcm) : -876
Wien BDL (Second Solenoid) (Gcm) : -857
Wien angle (Horizontal) : -51.9996
Wien BDL (Gcm) : -1198.62
Wien HV Polarity (Horizontal) : ON
Wien electrode Voltage (Horizontal) : 32.828
Laser attenuation Hall A : 75
Laser power Hall A : 100
Half-wave plate (off=out) : IN
rotating waveplate : 2000
Beam Half-wave plate (off=out) : IN
-----
Helicity Delay Set : 8 windows
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 60
Helicity Stable Read : 1000
Helicity Delay Read : 8 windows
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 943.396
-----
Target : Optics
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 3.44669e+07
Target type : 3.44669e+07
temperature loop 1(1) : 119.99
temperature loop 1(2) : 119.99
temperature loop 1(3) : 119.99
Heat exchange loop 1 H2 : 115.3
temperature loop 3(1) : 0
temperature loop 3(2) : 0
temperature loop 3(3) : 0
Heat exchange loop 3 H2 : 278.9
pressure loop He : 43.1177
pressure loop H2 before : 15.8572
pressure loop H2 return : 14.8363
HPH He loop 1 : 0.0970926
HPH He loop 2 : 0.0118473
HPH H2 loop 3 : 0.00634721
Left Det/Scint/S0 HV
Upper Quartz : -1485.2
Lower Quartz : -1531.1
A_T Quartz : -1545.8
Upper Scint : -11.9
Lower Scint : -22
S0 A : -901.6
S0 B : -901.9
-----
Det Encoder Position for PREX
Left Main Det x : 0.00146484
Left Main Det y : 0.0170898
Right Main Det x : HacH_DTC_HPE1313A:0_Ch10 --- Invalid channel name
Right Main Det y : 0.00634766
-----
PREX Septum
Current Setpoint(Amps) : 780.64
Current Readback(Amps) : 776.809
-----
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
# Map usage: Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map usage: Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map HV_ Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_ -c GET -P MV
# Map HV_ Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_ -c GET -P MC
# Map HV_Port Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_Port -c GET -P MV
# Map HV_Port Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_Port -c GET -P MC
# Map 'command_message' Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map 'command_message' Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Examples: Measured Voltage
*** Map name 1:,1: is missing or not properly set in the server list :
/adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Error(2) in information retrieval in -D Examples: -c GET -P MV
# Map Examples: Measured Current
*** Map name 1:,1: is missing or not properly set in the server list :
/adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Error(2) in information retrieval in -D Examples: -c GET -P MC
# Map Send Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Send Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
# Map Send Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Send Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map for Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map for Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
CODA config : config LeftHrs LeftNoGem
HAPPEX run : 4816