BPM signals are in ROC4 slot 25 channel for left arm : BPMA 0 to 3 BPMB 4 to 7 Raster current 11 to 15
I seem to miss a few BPMs channel, I will have to check the ribbon cable did not get unplugged.
Right arm on slot 23 ROC 2 channel 16 to 31
It seems I see BPM signals but not the raster. Will be easier to check with beam.
One should be careful with the attenuator board in the VXI crate on the floor for the raster current, the extender is a bit hard to fit on the board and can have bad contact. It seems right now the board is powered but it could be flaky.