NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 15:02:36 on October 27, 2014
Entry number 402984
keyword=End_of_Run_2380
****************************
Run Number: 2380
End of Run Comment:
Run_type=Other,target_type=Home(no target, or empty),comment_text=DVCS scaler test run
PRESCALE FACTORS:ps1=1 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 34
TIME : 0.074 mins
DEAD TIME: -0.01%
TRIGGER RATES: PRES/REAL
T1:T1: 7.6/7.6 Hz T2:T2: 0.0/4.3 Hz T3:T3: 0.0/4.0 Hz T4:T4: 0.0/87.7 Hz T5:T5: 0.0/211.7 Hz T6:T6: 0.0/4679.0 Hz T7:T7: 0.0/446.1 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 34/34 T2:T2: 0/19 T3:T3: 0/18 T4:T4: 0/390 T5:T5: 0/941 T6:T6: 0/20797 T7:T7: 0/1983 T8:T8: 0/460922
AVERAGE CURRENT
BCM 1 : -0.0342uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -0.1859
BCM d1 : -0.1183
****************************
End-of-run EPICS data for Run Number 2380 at Mon Oct 27 15:02:26 EDT 2014
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting Oct 25 at 13:33
Right MLU settings
1 0xffff
time of Right HRS MLU last setting Oct 25 at 13:33
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
Misc Epics Info
Left Arm Q1 momentum : 0.00060864
Left Arm Q1 power supply : 0.213626
Left Arm Q1 gauss meter : 0.0002801
Left Arm Q2 power supply current : -0.000456743
Left Arm Q2 momentum : -1.06071e-06
Left Arm Q2 gauss meter : 0.0001849
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : -2.01088
Left Arm D1 momentum : 0.00256938
Left Arm D1 NMR : 0.312011
Left Arm Q3 power supply current : -0.000962955
Left Arm Q3 momentum : -2.41876e-06
Left Arm Q3 gauss meter : 0.00053797
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.000923
-----
Average current of the two cavities : 224
Current on Upstream bcm : 420
Current on Downstream bcm : 28
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 420
Raw Downstream Signal : 28
MBSY1c magnet current (amp) : 391.167
MBSY1c Bdl : 2.28838e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9193.18
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.33946
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 9.37619e-06
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0
Wien BDL (First Solenoid) (Gcm) : -978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 21.6992
Wien BDL (Gcm) : 627.41
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 175
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 13056
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : 8 windows
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : 8 windows
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
Target Info
-----
Target : Loop 3
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 2.21627e-38
Target type : 2.21627e-38
temperature loop 1(1) : 294.85
temperature loop 1(2) : 294.94
temperature loop 1(3) : 294.4
Heat exchange loop 1 H2 : 293.97
temperature loop 2(1) : 294.36
temperature loop 2(2) : 294.59
temperature loop 2(3) : 294.45
Heat exchange loop 2 LH2 : 293.59
temperature loop 3(1) : 296.65
temperature loop 3(2) : 295.85
temperature loop 3(3) : 296.71
Heat exchange loop 3 H2 : 295.15
pressure loop H2 before : 35.2559
pressure loop H2 return : 35.8785
pressure loop H2 before : 34.9462
pressure loop H2 return : 34.3938
HPH loop 1 : 2.13466
HPH loop 2 : 1.73564
HPH loop 3 : 1.73528
DVCS Calorimeter
Measured HV voltages
*** Server at host adaq1.jlab.org is not properly responding
Measured HV currents
*** Server at host adaq1.jlab.org is not properly responding
Measured anode currents: block number
0 : -0.021 -0.001 0.005 0.011 -0.051 -0.042 -0.044 -0.046 -0.065 -0.052 -0.051 -0.052 -0.050
1 : -0.021 -0.001 0.005 0.011 -0.040 -0.037 -0.038 -0.042 -0.046 -0.048 -0.046 -0.049 -0.040
2 : -0.020 -0.001 0.005 0.012 -0.040 -0.035 -0.038 -0.042 -0.048 -0.048 -0.046 -0.049 -0.040
3 : -0.021 -0.001 0.007 0.012 -0.040 -0.037 -0.038 -0.043 -0.048 -0.049 -0.046 -0.049 -0.040
4 : -0.287 -0.001 0.010 0.004 -0.040 -0.035 -0.038 -0.043 -0.045 -0.048 -0.046 -0.048 -0.040
5 : -0.286 -0.002 0.011 0.004 -0.039 -0.035 -0.037 -0.042 -0.046 -0.045 -0.046 -0.048 -0.040
6 : -0.286 -0.002 0.010 0.005 -0.039 -0.035 -2.229 -0.042 -0.046 -0.046 -0.046 -0.050 -0.037
7 : -0.288 -0.001 0.012 0.005 -0.040 -0.037 -0.037 -0.042 -0.046 -0.045 -0.046 -0.049 -0.037
8 : -0.271 -0.004 0.009 0.009 -0.045 -0.040 -0.040 -0.045 -0.052 -0.050 -0.050 -0.051 -0.043
9 : -0.271 -0.005 0.009 0.009 -0.039 -0.035 -0.035 -0.040 -0.046 -0.045 -0.046 -0.048 -0.038
10 : -0.271 -0.005 0.009 0.007 -0.039 -0.034 -0.035 -0.043 -0.046 -0.046 -0.048 -0.049 -0.038
11 : -0.271 -0.004 0.010 0.007 -0.039 -0.035 -0.037 -0.043 -0.048 -0.046 -0.050 -0.048 -0.039
12 : -0.004 -0.002 0.009 0.010 -0.038 -0.032 -0.035 -0.042 -0.045 -0.050 -0.048 -0.048 -0.039
13 : -0.005 -0.002 0.007 0.011 -0.038 -0.034 -0.033 -0.040 -0.046 -0.048 -0.050 -0.048 -0.038
14 : -0.005 -0.002 0.006 0.011 -0.038 -0.034 -0.033 -0.035 -0.045 -0.050 -0.050 -0.050 -0.038
15 : -0.004 -0.004 0.007 0.013 -0.038 -0.034 -0.034 -0.037 -0.001 -0.049 -0.051 -0.050 -0.038