NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 17:50:49 on November 12, 2014
Entry number 403957
keyword=End_of_Run_10151
****************************
Run Number: 10151
End of Run Comment:
Run_type=Cosmics,target_type=Home(no target, or empty),comment_text=DVCS test, SpectrometerClock triggered with PS of 128, clusters required at 223
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 7955
TIME : 0.848 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/79.7 Hz T2:T2: 0.0/162.5 Hz T3:T3: 0.0/5731.7 Hz T4:T4: 0.0/949.2 Hz T5:T5: 0.0/237.0 Hz T6:T6: 0.0/12.3 Hz T7:T7: 0.0/6.3 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/4055 T2:T2: 0/8269 T3:T3: 0/291667 T4:T4: 0/48301 T5:T5: 0/12062 T6:T6: 0/625 T7:T7: 0/323 T8:T8: 0/5276924
AVERAGE CURRENT
BCM 1 : -0.0342uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -2.128
BCM d1 : -1.354
****************************
End-of-run EPICS data for Run Number 10151 at Wed Nov 12 17:50:29 EST 2014
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting Nov 12 at 16:25
Right MLU settings
0 0xffff
time of Right HRS MLU last setting Nov 12 at 16:25
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 7296.85
Beam Current : 137
------
Injector Measured Energy : 102.722
Average North Linac Measured Energy : 910.219333333333333
Average South Linac Measured Energy : 913.08
------
Left arm angle : -0.179
Left arm momentum : 1.00027
Right arm angle : 0.197
Right arm momentum : 0.00433189
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 7296.85
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 1.36481e-05
MBSY1c Bdl : 1.82633e+06
Misc Epics Info
Left Arm Q1 momentum : 1.00001
Left Arm Q1 power supply : 752.392
Left Arm Q1 gauss meter : -0.06248
Left Arm Q2 power supply current : 430.553
Left Arm Q2 momentum : 0.999892
Left Arm Q2 gauss meter : 0.22739
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 331.829
Left Arm D1 momentum : 1.00027
Left Arm D1 NMR : 0.370331
Left Arm Q3 power supply current : 398.115
Left Arm Q3 momentum : 0.999991
Left Arm Q3 gauss meter : -0.200892
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.3567
-----
Average current of the two cavities : 234
Current on Upstream bcm : 353
Current on Downstream bcm : 115
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 353
Raw Downstream Signal : 115
MBSY1c magnet current (amp) : 1.36481e-05
MBSY1c Bdl : 1.82633e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 7296.85
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.33312
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 9.37619e-06
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0
Wien BDL (First Solenoid) (Gcm) : -978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 21.5998
Wien BDL (Gcm) : 624.54
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 135
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 13056
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 200
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.824
Target Info
-----
Target : BeO
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : -3
Target type : -3
temperature loop 1(1) : 294.28
temperature loop 1(2) : 294.53
temperature loop 1(3) : 294.22
Heat exchange loop 1 H2 : 293.52
temperature loop 2(1) : 294.16
temperature loop 2(2) : 294.38
temperature loop 2(3) : 294.21
Heat exchange loop 2 LH2 : 293.43
temperature loop 3(1) : 296.35
temperature loop 3(2) : 295.49
temperature loop 3(3) : 296.73
Heat exchange loop 3 H2 : 294.89
pressure loop H2 before : 48.754
pressure loop H2 return : 48.9295
pressure loop H2 before : 47.9423
pressure loop H2 return : 47.6966
HPH loop 1 : 2.10411
HPH loop 2 : 1.7192
HPH loop 3 : 1.72037
DVCS Calorimeter
Measured HV voltages
*** Server at host adaq1.jlab.org is not properly responding
Measured HV currents
*** Server at host adaq1.jlab.org is not properly responding
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : 0.056 -0.001 0.000 -0.007 -0.015 -0.018 -0.018 -0.020 0.002 -0.018 -0.018 -0.021 -0.007
14 : 0.056 -0.001 0.001 -0.002 -0.013 -0.012 -0.012 -0.012 -0.016 -0.023 -0.013 -0.022 0.002
13 : 0.056 -0.002 0.000 0.001 -0.017 -0.021 -0.017 -0.017 -0.018 -0.018 -0.018 -0.015 -0.010
12 : 0.056 -0.001 -0.001 -0.004 -0.017 -0.021 -0.017 -0.010 -0.012 -0.022 -0.013 -0.020 -0.009
11 : -0.286 -0.005 0.000 -0.001 -0.015 -0.017 -0.013 -0.017 -0.018 -0.017 -0.017 -0.018 -0.010
10 : -0.284 -0.005 -0.001 -0.005 -0.016 -0.013 -0.011 -0.016 -0.020 -0.016 -0.018 -0.022 -0.013
9 : -0.286 -0.005 -0.001 -0.005 -0.015 -0.013 -0.018 -0.018 -0.018 -0.015 -0.016 -0.020 -0.006
8 : -0.284 -0.005 -0.002 0.000 -0.013 -0.015 -0.018 -0.021 -0.022 -0.018 -0.020 -0.020 -0.012
7 : -0.298 -0.001 -0.001 -0.002 -0.013 -0.016 -0.020 -0.017 -0.013 -0.017 -0.016 -0.021 -0.012
6 : -0.298 -0.001 -0.001 -0.002 -0.015 -0.015 -2.180 -0.018 -0.016 -0.018 -0.017 -0.020 -0.011
5 : -0.298 -0.001 0.005 0.000 -0.012 -0.015 -0.012 -0.020 -0.015 -0.016 -0.020 -0.020 -0.013
4 : -0.298 -0.001 -0.001 -0.007 -0.013 -0.012 -0.018 -0.020 -0.013 -0.015 -0.017 -0.020 -0.007
3 : -0.001 -0.001 -0.002 0.000 -0.015 -0.013 -0.017 -0.018 -0.021 -0.017 -0.017 -0.021 -0.006
2 : -0.001 -0.001 0.001 -0.002 -0.013 -0.015 -0.021 -0.021 -0.020 -0.015 -0.020 -0.018 -0.007
1 : -0.002 -0.001 -0.001 -0.002 -0.013 -0.016 -0.017 -0.017 -0.017 -0.016 -0.018 -0.024 -0.011
0 : -0.001 -0.001 -0.001 -0.001 -0.020 -0.017 -0.017 -0.015 -0.032 -0.021 -0.022 -0.017 -0.015
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'