• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name adaq

    Log entry time 16:30:52 on November 25, 2014

    Entry number 404221

    keyword=End_of_Run_10236
    ****************************
     Run Number: 10236
     End of Run Comment:
    Run_type=Other,target_type=Home(no target, or empty),comment_text=DVCS test after putting new spare boards in place of modules 0x3 and 0xd
     
    
    PRESCALE FACTORS:ps1=0   ps2=0   ps3=0   ps4=0   ps5=0   ps6=0   ps7=0   ps8=0   ps9=1   ps10=0   ps11=0   ps12=0   
    
    EVENTS   : 16119        
    
    TIME     : 1.326 mins  
    
    DEAD TIME:   0.00%      
    
    TRIGGER RATES:   PRES/REAL
    T1:T1: 0.0/11.3 Hz   T2:T2: 0.0/9.3  Hz   T3:T3: 0.0/12.1 Hz   T4:T4: 0.0/0.5  Hz   T5:T5: 0.0/3.2  Hz   T6:T6: 0.0/1.4  Hz   T7:T7: 0.0/6.4  Hz   T8:T8: 0.0/103700.0 Hz   
    
    TRIGGER TOTALS:   PRES/REAL
    T1:T1:      0/901      T2:T2:      0/743      T3:T3:      0/960      T4:T4:      0/41       T5:T5:      0/256      T6:T6:      0/109      T7:T7:      0/506      T8:T8:      0/8252959  
    
    AVERAGE CURRENT
    BCM 1 : -0.0342uA  
    
    APPROXIMATE BCM CHARGES (C)
    BCM u1 : -3.328         
    BCM d1 : -2.118         
    
    
    ****************************
    End-of-run EPICS data for Run Number 10236 at Tue Nov 25 16:30:24 EST 2014
    
    

    Right and Left MLU settings

    Left MLU settings 0 0xffff time of Left HRS MLU last setting Nov 24 at 03:02 Right MLU settings 0 0xffff time of Right HRS MLU last setting Nov 24 at 03:02 The meaning of the settings is documented elsewhere; briefly: first number is 0 or 1 0 = standard GMp trigger 1 = single detector trigger second number is a bit mask bit=1 means output is enabled bit=0 means output is disabled only last 8 bits are relevant for NIM output

    General Run Info

    Beam energy (MeV) : 0 Beam Current : 280.5 ------ Injector Measured Energy : 99.5653 Average North Linac Measured Energy : 911.271566666666667 Average South Linac Measured Energy : 913.08 ------ Left arm angle : -0.179 Left arm momentum : 0.00303733 Right arm angle : 0.197 Right arm momentum : 0.00437549 ------ Fast Raster Ix : 0 Fast Raster Iy : 0 ------ Hall A momentum (Tiefenbach) (HALLA:p) : 0 Hall A momentum orbit correction (dpp) : 0 Hall A setup momentum (MMSHLAE) : 7375 Hall A energy (halla_MeV) : 0 ------ MBSY1c magnet current (amp) : 2 MBSY1c Bdl : 1.82573e+06

    Misc Epics Info

    Left Arm Q1 momentum : 0.00201524 Left Arm Q1 power supply : 0.267033 Left Arm Q1 gauss meter : 0.0001991 Left Arm Q2 power supply current : 0.0207743 Left Arm Q2 momentum : 0.00422916 Left Arm Q2 gauss meter : 0.0011161 Left Arm Q2 power supply polarity : disabled Left Arm D1 power supply current : -1.99944 Left Arm D1 momentum : 0.00303733 Left Arm D1 NMR : 0.170352 Left Arm Q3 power supply current : 0.795085 Left Arm Q3 momentum : 0.00683704 Left Arm Q3 gauss meter : -0.00060145 Left Arm Q3 power supply polarity : disabled Left Arm B Field Hall Probe (D-G) : -0.00107 ----- Average current of the two cavities : 130 Current on Upstream bcm : 135 Current on Downstream bcm : 125 Upstream Cavity Coefficient : 1 Downstream Cavity Coefficient : 1 Upstream Pedestal : 0 Downstream Pedestal : 0 Raw Upstream Signal : 135 Raw Downstream Signal : 125 MBSY1c magnet current (amp) : 2 MBSY1c Bdl : 1.82573e+06 Hall A momentum (Tiefenbach) (HALLA:p) : 0 Hall A momentum orbit correction (dpp) : 0 Hall A setup momentum (MMSHLAE) : 7375 Hall A energy (halla_MeV) : 0 Delta(E)/E width (MV_AI_DXWID) : 4.34003 IPM1C12.XPOS : 0 IPM1H04A.XPOS : 0 IPM1H04A.YPOS : 0 IPM1H04D.XPOS : 0 IPM1H04D.YPOS : 0 ----- Wien angle (Vertical) : 0 Wien Vertical BDL (Gcm) : 9.37619e-06 Wien HV Polarity : POSITIVE Wien electrode Voltage : 0 Wien angle (Solenoids) : 0 Wien BDL (First Solenoid) (Gcm) : -978 Wien BDL (Second Solenoid) (Gcm) : 978 Wien angle (Horizontal) : 21.5998 Wien BDL (Gcm) : 624.54 Wien HV Polarity (Horizontal) : POSITIVE Wien electrode Voltage (Horizontal) : 0 Laser attenuation Hall A : 135 Laser power Hall A : 0 Rotating waveplate : 0 Fake Half-Wave Plate (8960=OUT) : 13056 Beam Half-wave plate (off=out) : OUT ----- Helicity Delay Set : No Delay Helicity Pattern Set : Quartet Helicity Clock Set : Free Clock Helicity Settle Read : 200 Helicity Stable Read : 33330 Helicity Delay Read : No Delay Helicity Pattern : Quartet Helicity Clock Read : Free Clock Helicity Frequency : 29.824

    Target Info

    ----- Target : 11 fan frequency loop 1 : 0 fan frequency loop 2 : 0 fan frequency loop 3 : 0 Encoder position : -4 Target type : -4 temperature loop 1(1) : 294.4 temperature loop 1(2) : 294.46 temperature loop 1(3) : 294.15 Heat exchange loop 1 H2 : 293.32 temperature loop 2(1) : 294 temperature loop 2(2) : 294.2 temperature loop 2(3) : 294.05 Heat exchange loop 2 LH2 : 293.22 temperature loop 3(1) : 296.09 temperature loop 3(2) : 295.28 temperature loop 3(3) : 296.24 Heat exchange loop 3 H2 : 294.66 pressure loop H2 before : 0 pressure loop H2 return : 0 pressure loop H2 before : 0.0030518 pressure loop H2 return : 0 HPH loop 1 : 0 HPH loop 2 : 0 HPH loop 3 : 0

    DVCS Calorimeter

    Measured HV voltages *** Server at host adaq1.jlab.org is not properly responding Measured HV currents *** Server at host adaq1.jlab.org is not properly responding Measured anode currents: block number DVCS IOCHACS is LIVE !! 15 : 0.056 -0.002 0.005 0.000 -0.015 -0.013 -0.020 -0.017 -0.001 -0.020 -0.021 -0.017 -0.015 14 : 0.055 -0.001 0.007 0.004 -0.013 -0.006 -0.012 -0.011 -0.021 -0.023 -0.013 -0.020 -0.005 13 : 0.056 -0.001 0.001 0.012 -0.016 -0.016 -0.016 -0.013 -0.024 -0.018 -0.020 -0.011 -0.018 12 : 0.057 -0.001 0.001 0.005 -0.016 -0.017 -0.013 -0.005 -0.016 -0.022 -0.016 -0.013 -0.017 11 : -0.323 -0.004 0.002 0.009 -0.020 -0.013 -0.013 -0.013 -0.023 -0.020 -0.021 -0.013 -0.018 10 : -0.325 -0.004 0.001 0.001 -0.021 -0.012 -0.011 -0.010 -0.022 -0.021 -0.023 -0.017 -0.021 9 : -0.325 -0.004 0.000 0.001 -0.022 -0.013 -0.016 -0.013 -0.022 -0.018 -0.018 -0.015 -0.013 8 : -0.325 -0.004 -0.001 0.005 -0.021 -0.013 -0.013 -0.016 -0.026 -0.023 -0.021 -0.016 -0.018 7 : -0.337 0.000 0.002 0.002 -0.018 -0.013 -0.018 -0.016 -0.021 -0.024 -0.020 -0.020 -0.018 6 : -0.337 0.001 0.002 0.002 -0.021 -0.012 -2.113 -0.020 -0.021 -0.018 -0.016 -0.017 -0.018 5 : -0.337 0.001 0.006 0.007 -0.018 -0.013 -0.011 -0.021 -0.020 -0.016 -0.017 -0.020 -0.018 4 : -0.337 0.000 0.000 -0.001 -0.018 -0.011 -0.015 -0.017 -0.018 -0.013 -0.015 -0.017 -0.013 3 : -0.001 -0.001 0.000 0.007 -0.013 -0.011 -0.016 -0.013 -0.024 -0.017 -0.016 -0.018 -0.013 2 : -0.001 -0.001 0.002 0.005 -0.013 -0.013 -0.017 -0.016 -0.022 -0.013 -0.017 -0.016 -0.013 1 : -0.002 0.000 -0.001 0.006 -0.013 -0.013 -0.013 -0.013 -0.017 -0.015 -0.016 -0.021 -0.017 0 : -0.004 0.000 -0.001 0.006 -0.021 -0.016 -0.013 -0.011 -0.029 -0.017 -0.023 -0.017 -0.021

    LHRS Detector High Voltage and Current

    S0 A B HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' S2m 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Cherenkov 1 2 3 4 5 6 7 8 9 10 HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' PRL1 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' PRL2 18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' VDC 1 2 HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Straw Chamber 1 2 3 4 5 6 HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'