NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 17:34:30 on December 2, 2014
Entry number 404346
keyword=End_of_Run_10289
****************************
Run Number: 10289
End of Run Comment:
Run_type=Other,target_type=Home(no target, or empty),comment_text=DVCS cosmic test, Trigger swap restored(127<->139, 90<->91)
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 6804
TIME : 88.265 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/11.5 Hz T2:T2: 0.0/9.2 Hz T3:T3: 0.0/12.3 Hz T4:T4: 0.0/0.4 Hz T5:T5: 0.0/3.1 Hz T6:T6: 0.0/1.2 Hz T7:T7: 0.0/6.3 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/60812 T2:T2: 0/48885 T3:T3: 0/65331 T4:T4: 0/2368 T5:T5: 0/16315 T6:T6: 0/6137 T7:T7: 0/33273 T8:T8: 0/549185788
AVERAGE CURRENT
BCM 1 : -0.0342uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -221.5
BCM d1 : -141
****************************
End-of-run EPICS data for Run Number 10289 at Tue Dec 2 17:33:52 EST 2014
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting Dec 2 at 11:01
Right MLU settings
1 0xffff
time of Right HRS MLU last setting Dec 2 at 11:01
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 0
Beam Current : 266
------
Injector Measured Energy : 100.064
Average North Linac Measured Energy : 911.065333333333333
Average South Linac Measured Energy : 913.12
------
Left arm angle : -0.179
Left arm momentum : 0.00210645
Right arm angle : 0.197
Right arm momentum : 0.00437549
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 0
MBSY1c Bdl : 1.82573e+06
Misc Epics Info
Left Arm Q1 momentum : 0.00127361
Left Arm Q1 power supply : 0.213626
Left Arm Q1 gauss meter : 0.0002019
Left Arm Q2 power supply current : 0.0191308
Left Arm Q2 momentum : 0.00397493
Left Arm Q2 gauss meter : 0.0010745
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : -2.00455
Left Arm D1 momentum : 0.00207889
Left Arm D1 NMR : 0.186655
Left Arm Q3 power supply current : -0.00378411
Left Arm Q3 momentum : -9.50499e-06
Left Arm Q3 gauss meter : -0.00018836
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.0007566
-----
Average current of the two cavities : 204
Current on Upstream bcm : 372
Current on Downstream bcm : 36
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 372
Raw Downstream Signal : 36
MBSY1c magnet current (amp) : 0
MBSY1c Bdl : 1.82573e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.34704
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 9.37619e-06
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0
Wien BDL (First Solenoid) (Gcm) : -978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 21.5998
Wien BDL (Gcm) : 624.54
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 270
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 13056
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 200
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.824
Target Info
-----
Target : BeO
fan frequency loop 1 : 0
fan frequency loop 2 : 19
fan frequency loop 3 : 0
Encoder position : -9
Target type : -9
temperature loop 1(1) : 286.21
temperature loop 1(2) : 238.67
temperature loop 1(3) : 220.84
Heat exchange loop 1 H2 : 239.4
temperature loop 2(1) : 19.024
temperature loop 2(2) : 18.783
temperature loop 2(3) : 19.328
Heat exchange loop 2 LH2 : 18.962
temperature loop 3(1) : 292.81
temperature loop 3(2) : 292.62
temperature loop 3(3) : 294.82
Heat exchange loop 3 H2 : 292.82
pressure loop H2 before : 25.8106
pressure loop H2 return : 26.4408
pressure loop H2 before : 17.2656
pressure loop H2 return : 17.0413
HPH loop 1 : 4.46161
HPH loop 2 : 192.488
HPH loop 3 : 2.51636
DVCS Calorimeter
Measured HV voltages
15 : -689.6 -718.0 -689.6 -726.8 -682.0 -727.5 -674.4 -744.3 -800.2 -762.5 -699.9 -634.4 -758.1
14 : -795.1 -756.1 -814.0 -755.6 -677.4 -684.6 -747.1 -711.4 -794.2 -693.4 -699.3 -769.0 -734.6
13 : -659.8 -788.1 -697.4 -753.6 -714.8 -752.3 -696.4 -740.2 -789.6 -656.0 -717.7 -702.8 -733.8
12 : -680.6 -727.5 -714.7 -696.4 -733.2 -638.5 -707.0 -665.2 -730.7 -707.9 -677.5 -769.0 -753.4
11 : -719.6 -766.6 -671.7 -770.6 -673.9 -656.4 -725.8 -730.5 -686.1 -780.7 -676.5 -698.1 -718.0
10 : -673.5 -762.7 -738.4 -784.8 -711.5 -719.4 -703.4 -794.1 -646.2 -766.0 -850.3 -729.1 -733.2
09 : -640.7 -694.0 -686.0 -816.7 -718.4 -694.4 -714.8 -702.1 -828.3 -694.7 -669.4 -755.4 -651.7
08 : -721.1 -764.3 -717.9 -726.4 -793.7 -653.8 -740.2 -636.5 -693.2 -665.2 -641.8 -723.5 -720.1
07 : -741.1 -820.4 -760.8 -698.0 -727.4 -690.4 -663.0 -667.4 -682.4 -701.9 -691.5 -637.9 -794.3
06 : -756.7 -759.3 -752.9 -779.0 -717.2 -699.7 -733.0 -740.6 -793.6 -674.0 -680.2 -720.1 -727.4
05 : -743.6 -738.1 -652.5 -786.2 -697.6 -758.3 -644.1 -653.8 -735.2 -702.3 -663.2 -768.5 -694.6
04 : -710.4 -736.8 -779.0 -712.7 -695.1 -765.3 -734.8 -729.6 -670.6 -679.7 -675.5 -678.4 -690.5
03 : -747.5 -673.4 -687.5 -647.3 -715.3 -670.4 -632.3 -675.9 -733.5 -688.1 -711.3 -732.6 -667.6
02 : -745.6 -758.1 -723.6 -699.4 -700.5 -731.7 -711.7 -672.2 -708.8 -716.9 -714.9 -690.9 -744.4
01 : -691.6 -746.5 -850.3 -850.4 -749.5 -699.1 -631.9 -719.1 -659.6 -730.1 -709.7 -711.4 -670.6
00 : -673.6 -702.2 -730.4 -786.3 -721.2 -790.9 -767.0 -758.4 -701.2 -760.6 -686.8 -804.3 -725.9
Measured HV currents
15 : -685.6 -711.0 -682.8 -721.4 -672.3 -718.3 -670.2 -737.8 -790.5 -755.5 -695.1 -628.6 -765.8
14 : -789.5 -753.5 -806.4 -746.5 -669.7 -675.5 -738.9 -702.9 -782.4 -687.7 -689.1 -759.1 -744.4
13 : -651.9 -781.2 -689.8 -747.3 -707.4 -747.8 -688.1 -733.9 -783.1 -647.9 -710.1 -696.8 -743.0
12 : -676.0 -719.8 -705.7 -689.2 -724.3 -630.3 -702.5 -660.4 -720.7 -703.2 -672.5 -762.6 -761.3
11 : -711.7 -759.9 -666.3 -761.8 -669.2 -648.1 -734.7 -722.4 -679.0 -774.3 -673.0 -693.4 -722.0
10 : -666.4 -756.9 -728.7 -776.3 -705.8 -714.1 -709.2 -789.8 -635.1 -757.6 -986.4 -725.3 -741.1
09 : -631.5 -685.8 -681.2 -809.0 -710.5 -685.9 -719.2 -695.5 -821.6 -687.7 -663.9 -746.4 -656.3
08 : -714.9 -758.9 -712.4 -719.3 -786.0 -646.7 -748.0 -631.0 -685.0 -654.7 -638.5 -718.6 -729.1
07 : -732.1 -811.4 -756.0 -689.4 -720.7 -687.2 -668.0 -657.6 -674.3 -697.7 -685.5 -633.2 -800.1
06 : -749.3 -750.7 -749.1 -771.0 -707.6 -696.7 -740.6 -734.7 -789.3 -667.4 -672.5 -716.9 -735.4
05 : -734.3 -732.6 -648.1 -780.9 -689.9 -751.7 -650.4 -648.4 -730.4 -696.7 -657.0 -759.3 -700.0
04 : -703.2 -729.7 -773.2 -703.8 -687.0 -759.1 -740.4 -721.1 -665.4 -670.2 -664.1 -673.4 -699.1
03 : -740.7 -670.0 -680.1 -639.2 -705.8 -665.0 -641.2 -670.3 -725.6 -683.7 -706.7 -727.3 -674.5
02 : -738.7 -753.6 -720.7 -694.8 -694.0 -726.9 -721.1 -663.3 -701.3 -709.9 -708.1 -680.8 -751.9
01 : -686.3 -741.2 -847.7 -842.6 -743.0 -690.0 -639.7 -709.9 -652.2 -725.6 -705.3 -705.6 -677.8
00 : -665.8 -691.9 -721.7 -779.5 -711.3 -786.7 -771.9 -752.1 -695.9 -753.0 -676.4 -798.1 -738.0
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: 1 RC s13.10 mv -599.7
TOP2: 1 RC s13.11 mv -599.7
DVCS Cosmic Padels BOTTOM
BOTTOM1: 1 RC s13.5 mv -601.8
BOTTOM2: 1 RC s13.4 mv -601.3
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : 0.048 -0.001 -0.009 -0.007 -0.011 -0.011 -0.010 -0.009 -0.009 -0.029 -0.022 -0.024 -0.004
14 : 0.049 -0.001 -0.005 -0.004 -0.010 -0.004 -0.006 -0.002 -0.024 -0.034 -0.015 -0.028 0.006
13 : 0.049 -0.001 -0.009 0.001 -0.011 -0.012 -0.009 -0.006 -0.031 -0.029 -0.022 -0.021 -0.006
12 : 0.049 -0.001 -0.009 -0.006 -0.012 -0.013 -0.009 -0.001 -0.017 -0.028 -0.021 -0.027 -0.006
11 : -0.386 -0.007 -0.001 -0.001 -0.007 -0.011 -0.004 -0.004 -0.023 -0.024 -0.022 -0.026 -0.007
10 : -0.387 -0.009 -0.001 -0.007 -0.006 -0.009 -0.004 -0.004 -0.027 -0.026 -0.021 -0.028 -0.010
9 : -0.387 -0.007 0.000 -0.009 -0.006 -0.009 -0.007 -0.007 -0.028 -0.026 -0.021 -0.028 -0.001
8 : -0.385 -0.007 -0.001 -0.005 -0.007 -0.009 -0.009 -0.009 -0.031 -0.028 -0.027 -0.027 -0.006
7 : -0.393 -0.006 0.001 -0.006 -0.009 -0.007 -0.009 -0.010 -0.023 -0.021 -0.022 -0.026 -0.001
6 : -0.393 -0.006 0.001 -0.007 -0.010 -0.006 -2.078 -0.012 -0.024 -0.023 -0.021 -0.024 0.000
5 : -0.393 -0.006 0.004 -0.006 -0.010 -0.012 -0.002 -0.011 -0.024 -0.023 -0.022 -0.023 -0.006
4 : -0.396 -0.006 -0.002 -0.012 -0.007 -0.010 -0.009 -0.012 -0.024 -0.023 -0.026 -0.024 -0.001
3 : -0.013 -0.006 -0.004 -0.009 -0.007 -0.010 -0.009 -0.010 -0.026 -0.023 -0.022 -0.024 -0.004
2 : -0.013 -0.006 -0.001 -0.011 -0.007 -0.010 -0.012 -0.012 -0.029 -0.022 -0.023 -0.020 -0.004
1 : -0.013 -0.006 -0.002 -0.009 -0.006 -0.011 -0.007 -0.009 -0.027 -0.023 -0.021 -0.020 -0.006
0 : -0.011 -0.007 -0.005 -0.007 -0.013 -0.013 -0.009 -0.006 -0.040 -0.028 -0.031 -0.015 -0.009
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'