NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 18:03:49 on December 2, 2014
Entry number 404350
keyword=End_of_Run_10290
****************************
Run Number: 10290
End of Run Comment:
Run_type=Other,target_type=Home(no target, or empty),comment_text=DVCS cosmic test, Trigger swap restored(127<->139, 90<->91)
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 1985
TIME : 28.277 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/11.4 Hz T2:T2: 0.0/9.2 Hz T3:T3: 0.0/12.3 Hz T4:T4: 0.0/0.5 Hz T5:T5: 0.0/3.1 Hz T6:T6: 0.0/1.1 Hz T7:T7: 0.0/6.3 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/19392 T2:T2: 0/15623 T3:T3: 0/20915 T4:T4: 0/789 T5:T5: 0/5222 T6:T6: 0/1882 T7:T7: 0/10633 T8:T8: 0/175938873
AVERAGE CURRENT
BCM 1 : -0.0342uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -70.96
BCM d1 : -45.16
****************************
End-of-run EPICS data for Run Number 10290 at Tue Dec 2 18:03:12 EST 2014
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting Dec 2 at 11:01
Right MLU settings
1 0xffff
time of Right HRS MLU last setting Dec 2 at 11:01
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 0
Beam Current : 328.5
------
Injector Measured Energy : 102.722
Average North Linac Measured Energy : 910.219333333333333
Average South Linac Measured Energy : 913.08
------
Left arm angle : -0.179
Left arm momentum : 0.00209615
Right arm angle : 0.197
Right arm momentum : 0.00437549
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 0
MBSY1c Bdl : 1.82573e+06
Misc Epics Info
Left Arm Q1 momentum : 0.0018885
Left Arm Q1 power supply : 0.267033
Left Arm Q1 gauss meter : 0.000185
Left Arm Q2 power supply current : 0.0197223
Left Arm Q2 momentum : 0.00407345
Left Arm Q2 gauss meter : 0.0010781
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : -1.99932
Left Arm D1 momentum : 0.00209615
Left Arm D1 NMR : 0.156822
Left Arm Q3 power supply current : -0.00402861
Left Arm Q3 momentum : -1.01191e-05
Left Arm Q3 gauss meter : -0.00015574
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.0007587
-----
Average current of the two cavities : 73
Current on Upstream bcm : 121
Current on Downstream bcm : 25
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 121
Raw Downstream Signal : 25
MBSY1c magnet current (amp) : 0
MBSY1c Bdl : 1.82573e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.34704
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 9.37619e-06
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0
Wien BDL (First Solenoid) (Gcm) : -978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 21.5998
Wien BDL (Gcm) : 624.54
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 270
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 13056
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 200
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.824
Target Info
-----
Target : 11
fan frequency loop 1 : 0
fan frequency loop 2 : 19
fan frequency loop 3 : 0
Encoder position : -9
Target type : -9
temperature loop 1(1) : 283.69
temperature loop 1(2) : 230.9
temperature loop 1(3) : 211.72
Heat exchange loop 1 H2 : 232.06
temperature loop 2(1) : 19.015
temperature loop 2(2) : 18.792
temperature loop 2(3) : 19.178
Heat exchange loop 2 LH2 : 18.943
temperature loop 3(1) : 292.47
temperature loop 3(2) : 292.42
temperature loop 3(3) : 294.65
Heat exchange loop 3 H2 : 292.67
pressure loop H2 before : 25.7496
pressure loop H2 return : 26.3721
pressure loop H2 before : 17.2808
pressure loop H2 return : 17.0809
HPH loop 1 : 4.40702
HPH loop 2 : 133.528
HPH loop 3 : 2.43704
DVCS Calorimeter
Measured HV voltages
15 : -689.6 -718.0 -689.6 -726.8 -682.0 -727.5 -674.4 -744.3 -800.2 -762.5 -699.9 -634.4 -758.1
14 : -795.1 -756.1 -814.0 -755.6 -677.4 -684.6 -747.1 -711.4 -794.2 -693.4 -699.3 -769.0 -734.6
13 : -659.8 -788.1 -697.4 -753.6 -714.8 -752.3 -696.4 -740.2 -789.6 -656.0 -717.7 -702.8 -733.8
12 : -680.6 -727.5 -714.7 -696.4 -733.2 -638.5 -707.0 -665.2 -730.7 -707.9 -677.5 -769.0 -753.4
11 : -719.6 -766.6 -671.7 -770.6 -673.9 -656.4 -725.8 -730.5 -686.1 -780.7 -676.5 -698.1 -718.0
10 : -673.5 -762.7 -738.4 -784.8 -711.5 -719.4 -703.4 -794.1 -646.2 -766.0 -850.3 -729.1 -733.2
09 : -640.7 -694.0 -686.0 -816.7 -718.4 -694.4 -714.8 -702.1 -828.3 -694.7 -669.4 -755.4 -651.7
08 : -721.1 -764.3 -717.9 -726.4 -793.7 -653.8 -740.2 -636.5 -693.2 -665.2 -641.8 -723.5 -720.1
07 : -741.1 -820.4 -760.8 -698.0 -727.4 -690.4 -663.0 -667.4 -682.4 -701.9 -691.5 -637.9 -794.3
06 : -756.7 -759.3 -752.9 -779.0 -717.2 -699.7 -733.0 -740.6 -793.6 -674.0 -680.2 -720.1 -727.4
05 : -743.6 -738.1 -652.5 -786.2 -697.6 -758.3 -644.1 -653.8 -735.2 -702.3 -663.2 -768.5 -694.6
04 : -710.4 -736.8 -779.0 -712.7 -695.1 -765.3 -734.8 -729.6 -670.6 -679.7 -675.5 -678.4 -690.5
03 : -747.5 -673.4 -687.5 -647.3 -715.3 -670.4 -632.3 -675.9 -733.5 -688.1 -711.3 -732.6 -667.6
02 : -745.6 -758.1 -723.6 -699.4 -700.5 -731.7 -711.7 -672.2 -708.8 -716.9 -714.9 -690.9 -744.4
01 : -691.6 -746.5 -850.3 -850.4 -749.5 -699.1 -631.9 -719.1 -659.6 -730.1 -709.7 -711.4 -670.6
00 : -673.6 -702.2 -730.4 -786.3 -721.2 -790.9 -767.0 -758.4 -701.2 -760.6 -686.8 -804.3 -725.9
Measured HV currents
15 : -684.3 -711.0 -680.8 -720.7 -677.0 -716.9 -668.2 -739.2 -794.6 -754.1 -693.7 -629.2 -765.8
14 : -786.8 -753.5 -806.4 -746.5 -668.4 -678.8 -740.2 -704.9 -782.4 -685.7 -693.1 -759.8 -742.3
13 : -656.6 -781.2 -690.5 -750.0 -708.7 -743.1 -688.1 -731.9 -783.1 -651.3 -711.5 -693.4 -744.4
12 : -674.0 -719.8 -707.0 -689.2 -725.6 -631.6 -699.1 -658.4 -721.4 -701.2 -672.5 -762.6 -761.3
11 : -709.6 -759.9 -665.0 -763.8 -669.9 -649.4 -730.6 -726.4 -681.7 -769.6 -670.3 -690.0 -726.8
10 : -667.0 -756.9 -728.0 -777.7 -703.1 -711.5 -710.6 -785.8 -636.4 -755.0 -987.7 -724.0 -740.4
09 : -633.5 -685.8 -682.6 -805.7 -711.9 -687.2 -721.9 -696.8 -820.9 -690.4 -666.6 -745.7 -658.4
08 : -711.6 -758.9 -713.7 -719.3 -787.3 -647.3 -748.7 -631.6 -685.0 -658.0 -635.1 -719.3 -728.5
07 : -735.5 -811.4 -752.7 -690.7 -720.1 -684.5 -671.4 -659.6 -677.7 -692.3 -683.5 -631.2 -802.9
06 : -748.7 -751.4 -749.1 -768.3 -709.6 -697.4 -738.6 -731.3 -784.7 -668.7 -673.8 -714.2 -734.0
05 : -736.3 -735.2 -647.4 -780.3 -691.3 -752.4 -650.4 -651.0 -729.7 -694.0 -655.0 -762.0 -701.3
04 : -701.9 -729.7 -775.2 -703.8 -685.6 -760.5 -744.5 -719.7 -666.1 -672.9 -670.1 -672.1 -698.5
03 : -744.7 -666.6 -680.1 -639.9 -707.8 -663.7 -638.5 -669.7 -725.6 -684.3 -706.1 -723.9 -675.1
02 : -738.0 -754.9 -720.0 -693.5 -693.3 -729.6 -719.0 -665.3 -702.7 -708.6 -708.1 -682.2 -751.3
01 : -683.6 -743.9 -847.7 -846.6 -741.0 -689.3 -639.0 -709.9 -652.2 -724.2 -704.6 -705.6 -681.9
00 : -669.1 -693.3 -721.7 -776.1 -714.6 -783.4 -775.9 -750.8 -695.3 -756.3 -679.0 -795.4 -733.2
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: 1 RC s13.10 mv -599.7
TOP2: 1 RC s13.11 mv -599.7
DVCS Cosmic Padels BOTTOM
BOTTOM1: 1 RC s13.5 mv -601.8
BOTTOM2: 1 RC s13.4 mv -601.3
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : 0.060 -0.001 0.004 -0.001 -0.015 -0.018 -0.021 -0.018 -0.004 -0.023 -0.024 -0.024 -0.006
14 : 0.059 0.000 0.006 0.002 -0.015 -0.011 -0.015 -0.011 -0.022 -0.029 -0.018 -0.027 0.004
13 : 0.060 -0.001 0.002 0.007 -0.018 -0.020 -0.020 -0.016 -0.023 -0.024 -0.027 -0.022 -0.011
12 : 0.059 -0.001 0.002 0.002 -0.018 -0.020 -0.018 -0.009 -0.017 -0.027 -0.022 -0.027 -0.009
11 : -0.247 -0.009 0.004 0.005 -0.016 -0.017 -0.015 -0.016 -0.024 -0.024 -0.024 -0.024 -0.011
10 : -0.247 -0.009 0.001 -0.001 -0.016 -0.015 -0.012 -0.013 -0.023 -0.023 -0.026 -0.028 -0.013
9 : -0.247 -0.009 0.001 -0.001 -0.016 -0.016 -0.018 -0.016 -0.022 -0.022 -0.026 -0.028 -0.007
8 : -0.247 -0.009 0.000 0.002 -0.013 -0.016 -0.020 -0.020 -0.026 -0.026 -0.029 -0.027 -0.011
7 : -0.262 0.000 0.001 0.000 -0.013 -0.017 -0.020 -0.018 -0.022 -0.024 -0.026 -0.027 -0.011
6 : -0.264 0.000 0.002 -0.001 -0.017 -0.015 -2.081 -0.021 -0.022 -0.024 -0.024 -0.023 -0.011
5 : -0.264 0.000 0.006 0.004 -0.015 -0.015 -0.013 -0.021 -0.021 -0.023 -0.027 -0.026 -0.013
4 : -0.262 0.000 0.001 -0.004 -0.015 -0.013 -0.017 -0.021 -0.020 -0.022 -0.027 -0.024 -0.007
3 : 0.001 0.000 0.001 0.001 -0.015 -0.012 -0.016 -0.020 -0.026 -0.026 -0.024 -0.026 -0.007
2 : 0.001 0.000 0.005 -0.001 -0.015 -0.012 -0.018 -0.020 -0.026 -0.021 -0.027 -0.022 -0.009
1 : 0.001 0.001 -0.001 0.000 -0.016 -0.013 -0.016 -0.017 -0.023 -0.023 -0.024 -0.026 -0.012
0 : 0.001 0.000 0.001 0.001 -0.022 -0.016 -0.017 -0.015 -0.038 -0.026 -0.028 -0.021 -0.015
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'