NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 00:38:10 on December 3, 2014
Entry number 404360
keyword=End_of_Run_10293
****************************
Run Number: 10293
End of Run Comment:
Run_type=Other,target_type=Home(no target, or empty),comment_text=DVCS pedestal, Trigger swap restored(127<->139, 90<->91)
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=100 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 0
TIME : 0.017 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/0.0 Hz T2:T2: 0.0/0.0 Hz T3:T3: 0.0/0.0 Hz T4:T4: 0.0/0.0 Hz T5:T5: 0.0/0.0 Hz T6:T6: 0.0/0.0 Hz T7:T7: 0.0/0.0 Hz T8:T8: 0.0/0.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/0 T2:T2: 0/0 T3:T3: 0/0 T4:T4: 0/0 T5:T5: 0/0 T6:T6: 0/0 T7:T7: 0/0 T8:T8: 0/0
AVERAGE CURRENT
BCM 1 : -0.0000uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -4.033E-07
BCM d1 : -2.567E-07
****************************
End-of-run EPICS data for Run Number 10293 at Wed Dec 3 00:37:34 EST 2014
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting Dec 2 at 11:01
Right MLU settings
1 0xffff
time of Right HRS MLU last setting Dec 2 at 11:01
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 0
Beam Current : 64.5
------
Injector Measured Energy : 102.722
Average North Linac Measured Energy : 910.219333333333333
Average South Linac Measured Energy : 913.08
------
Left arm angle : -0.179
Left arm momentum : 0.0021251
Right arm angle : 0.197
Right arm momentum : 0.00437549
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 0
MBSY1c Bdl : 1.82573e+06
Misc Epics Info
Left Arm Q1 momentum : 0.00137531
Left Arm Q1 power supply : 0.267033
Left Arm Q1 gauss meter : 0.0002211
Left Arm Q2 power supply current : 0.0201341
Left Arm Q2 momentum : 0.00399076
Left Arm Q2 gauss meter : 0.0010527
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : -2.00543
Left Arm D1 momentum : 0.0021251
Left Arm D1 NMR : 0.188267
Left Arm Q3 power supply current : -0.00465303
Left Arm Q3 momentum : -1.10829e-05
Left Arm Q3 gauss meter : -0.0001583
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.0007396
-----
Average current of the two cavities : 353.5
Current on Upstream bcm : 593
Current on Downstream bcm : 114
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 593
Raw Downstream Signal : 114
MBSY1c magnet current (amp) : 0
MBSY1c Bdl : 1.82573e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.34704
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 9.37619e-06
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0
Wien BDL (First Solenoid) (Gcm) : -978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 21.5998
Wien BDL (Gcm) : 624.54
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 270
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 13056
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 200
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.824
Target Info
-----
Target : 11
fan frequency loop 1 : 0
fan frequency loop 2 : 19.5
fan frequency loop 3 : 0
Encoder position : -9
Target type : -9
temperature loop 1(1) : 249.04
temperature loop 1(2) : 147.76
temperature loop 1(3) : 143.94
Heat exchange loop 1 H2 : 149.22
temperature loop 2(1) : 19.009
temperature loop 2(2) : 18.827
temperature loop 2(3) : 19.256
Heat exchange loop 2 LH2 : 18.992
temperature loop 3(1) : 288.1
temperature loop 3(2) : 290.18
temperature loop 3(3) : 292.31
Heat exchange loop 3 H2 : 290.55
pressure loop H2 before : 25.745
pressure loop H2 return : 26.334
pressure loop H2 before : 17.2396
pressure loop H2 return : 16.9421
HPH loop 1 : 4.50081
HPH loop 2 : 166.578
HPH loop 3 : 2.52236
DVCS Calorimeter
Measured HV voltages
15 : 0.9 -0.2 -0.2 0.2 -0.4 -1.5 0.0 -0.9 -0.9 0.1 0.0 -0.6 0.9
14 : 0.2 -0.4 0.4 -0.4 -0.6 -0.8 0.7 -0.6 -1.2 -0.7 -0.0 -1.7 0.9
13 : -0.0 -0.4 0.1 -0.3 -0.6 0.0 0.8 -0.9 -0.5 0.6 -0.6 0.4 0.9
12 : 0.3 0.4 -0.3 0.0 -1.0 -0.7 1.2 -0.7 -1.9 0.3 0.0 0.5 0.4
11 : -1.8 1.4 -0.6 -1.5 0.7 0.1 -0.5 -0.3 -0.6 0.1 0.8 -0.8 -0.0
10 : 0.2 -0.5 0.9 -0.4 -0.6 -0.7 -0.8 -0.1 -0.9 -0.2 0.8 -0.3 0.2
09 : -2.1 0.3 -0.0 0.1 0.1 -0.3 -1.3 0.3 -0.8 -0.2 1.0 0.3 -0.3
08 : -1.3 1.7 -0.7 -1.9 0.3 -1.2 -0.2 1.1 -0.6 -0.0 0.3 0.0 -1.5
07 : -1.2 0.0 1.2 -0.1 -1.1 0.1 0.1 -0.7 -0.1 0.2 -0.8 1.3 -0.4
06 : -0.5 -0.2 0.2 -1.0 -0.8 0.6 -0.2 -0.6 0.5 -1.0 0.0 -0.2 -1.0
05 : -1.3 -1.4 1.1 -0.8 -0.7 0.4 0.7 -1.4 -0.0 0.0 0.0 0.2 -0.8
04 : -2.4 -0.4 0.8 -0.3 -0.4 0.6 -0.6 -0.6 0.6 0.5 -0.3 0.1 -1.3
03 : -0.3 1.2 -0.2 -0.1 -0.7 -0.4 -0.4 0.3 -0.2 -0.0 -0.9 0.6 1.1
02 : -0.3 0.7 -0.3 -0.6 -1.3 -1.4 0.4 -0.3 0.1 1.2 -0.4 -1.4 -0.3
01 : 1.6 0.5 -0.2 1.0 -1.1 -0.7 0.3 -0.1 -0.3 0.2 0.4 -0.4 0.1
00 : 0.8 -0.3 -0.5 0.4 -0.0 -0.8 0.8 0.0 -0.2 -0.7 0.0 -0.7 1.0
Measured HV currents
15 : -1.4 -1.6 -1.7 1.0 -1.4 2.2 0.6 2.4 -0.6 -1.4 0.1 -1.6 -1.9
14 : 1.2 -1.9 1.4 -0.1 1.6 0.3 0.2 -1.0 -0.5 -1.1 0.9 -0.3 1.2
13 : -1.4 -0.8 -1.3 0.3 -0.4 -1.4 1.6 1.4 0.7 0.4 -1.9 0.4 -1.1
12 : -0.3 -1.4 -0.5 -0.2 0.3 1.5 -1.0 -0.6 0.9 3.7 -1.0 2.6 0.3
11 : -0.4 3.0 -0.9 -0.7 1.2 -0.8 1.1 0.9 -0.7 -3.5 -0.9 -2.6 1.7
10 : 0.0 -0.8 -1.1 -2.2 -0.7 0.1 0.8 -1.6 -0.9 3.5 -1.2 -0.3 -1.7
09 : 0.7 -1.3 0.1 3.4 -1.7 0.3 -2.2 0.7 1.8 0.4 3.0 -1.4 -1.6
08 : -0.8 1.3 2.4 -1.7 1.3 -3.0 -0.3 -0.2 -0.5 1.0 -1.3 -1.3 0.8
07 : -1.1 0.7 -1.0 -1.5 -1.6 0.0 0.2 0.6 0.6 -3.6 1.3 0.4 3.1
06 : 1.6 1.8 1.0 -1.3 -0.8 0.3 -0.4 -0.2 1.3 4.3 1.3 2.1 -1.8
05 : -1.2 -1.7 -0.2 1.0 0.7 2.5 3.6 -0.2 2.7 0.7 -0.9 -1.3 1.8
04 : 1.1 1.0 2.2 -0.2 -0.3 -3.4 -3.4 1.4 -1.2 1.3 -0.7 1.7 -0.4
03 : 0.0 0.9 -2.1 -0.6 -0.5 0.0 -0.5 0.2 1.4 -1.3 1.0 1.2 -0.4
02 : -0.1 3.4 -2.2 -0.8 -0.0 -1.8 2.0 -0.4 0.6 -0.2 0.4 0.9 -2.9
01 : -1.6 -3.0 -0.5 1.3 2.1 -0.6 3.6 1.4 -0.9 1.1 -1.6 2.0 3.5
00 : 1.1 1.0 1.2 0.6 -1.5 2.9 -2.6 -1.6 0.4 2.5 0.8 -3.1 -0.5
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: 1 RC s13.10 mv 0.0
TOP2: 1 RC s13.11 mv 0.1
DVCS Cosmic Padels BOTTOM
BOTTOM1: 1 RC s13.5 mv 0.4
BOTTOM2: 1 RC s13.4 mv 0.1
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : 0.061 0.001 0.013 -0.011 -0.020 -0.024 -0.024 -0.024 -0.007 -0.006 -0.023 -0.011 -0.015
14 : 0.061 0.002 0.012 -0.009 -0.020 -0.017 -0.018 -0.020 -0.015 -0.012 -0.012 -0.020 -0.004
13 : 0.061 0.001 0.011 -0.002 -0.023 -0.024 -0.023 -0.022 -0.012 -0.007 -0.029 -0.018 -0.016
12 : 0.061 0.002 0.009 -0.009 -0.022 -0.024 -0.022 -0.016 -0.004 -0.006 -0.013 -0.013 -0.016
11 : -0.084 -0.004 0.007 -0.004 -0.018 -0.021 -0.017 -0.017 -0.013 -0.005 -0.022 -0.017 -0.020
10 : -0.084 -0.002 0.006 -0.009 -0.018 -0.018 -0.016 -0.017 -0.012 -0.002 -0.026 -0.023 -0.022
9 : -0.084 -0.002 0.006 -0.006 -0.018 -0.021 -0.023 -0.018 -0.007 -0.001 -0.028 -0.023 -0.015
8 : -0.084 -0.004 0.005 -0.009 -0.017 -0.020 -0.023 -0.022 -0.009 -0.001 -0.016 -0.011 -0.018
7 : -0.116 0.002 0.004 -0.009 -0.016 -0.021 -0.024 -0.021 -0.002 -0.005 -0.002 -0.020 -0.020
6 : -0.116 0.001 0.006 -0.007 -0.020 -0.017 -2.169 -0.023 -0.007 -0.011 -0.004 -0.024 -0.018
5 : -0.116 0.002 0.011 -0.001 -0.016 -0.018 -0.016 -0.023 -0.005 -0.009 -0.010 -0.032 -0.021
4 : -0.115 0.001 0.007 -0.011 -0.016 -0.018 -0.021 -0.022 -0.001 -0.006 -0.010 -0.018 -0.015
3 : 0.001 0.002 0.009 -0.002 -0.018 -0.018 -0.021 -0.021 -0.010 -0.009 -0.011 -0.022 -0.015
2 : 0.002 0.001 0.013 -0.005 -0.017 -0.020 -0.022 -0.023 -0.017 -0.010 -0.016 -0.020 -0.012
1 : 0.001 0.002 0.009 -0.002 -0.016 -0.020 -0.021 -0.021 -0.015 -0.015 -0.020 -0.018 -0.016
0 : 0.002 0.002 0.010 0.005 -0.022 -0.020 -0.021 -0.018 -0.031 -0.016 -0.023 -0.018 -0.021
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'