NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 17:17:30 on December 9, 2014
Entry number 404729
keyword=End_of_Run_10455
****************************
Run Number: 10455
End of Run Comment:
Run_type=Other,target_type=15 cm LH2 top,comment_text=DVCS pedestal check with trigger pedestal offsets set to 2000
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 23738
TIME : 33.715 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/11.7 Hz T2:T2: 0.0/9.5 Hz T3:T3: 0.0/12.6 Hz T4:T4: 0.0/0.5 Hz T5:T5: 0.0/3.4 Hz T6:T6: 0.0/1.3 Hz T7:T7: 0.0/6.5 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/23765 T2:T2: 0/19157 T3:T3: 0/25413 T4:T4: 0/1003 T5:T5: 0/6803 T6:T6: 0/2632 T7:T7: 0/13076 T8:T8: 0/209777331
AVERAGE CURRENT
BCM 1 : -0.0342uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -84.6
BCM d1 : -53.84
****************************
End-of-run EPICS data for Run Number 10455 at Tue Dec 9 17:16:57 EST 2014
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 8 at 17:52
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 8 at 17:52
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 7290
Beam Current : 258.5
------
Injector Measured Energy : 100.119
Average North Linac Measured Energy : 911.610333333333333
Average South Linac Measured Energy : 910.98
------
Left arm angle : 36.2
Left arm momentum : 1.00002
Right arm angle : 0.197
Right arm momentum : 0.00437549
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 7290
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 1.36481e-05
MBSY1c Bdl : 1.82462e+06
Misc Epics Info
Left Arm Q1 momentum : 1.00001
Left Arm Q1 power supply : 752.338
Left Arm Q1 gauss meter : 0.06323
Left Arm Q2 power supply current : 430.586
Left Arm Q2 momentum : 0.999968
Left Arm Q2 gauss meter : -0.22722
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : 331.949
Left Arm D1 momentum : 1.00002
Left Arm D1 NMR : 0.370237
Left Arm Q3 power supply current : 398.172
Left Arm Q3 momentum : 1.00014
Left Arm Q3 gauss meter : 0.201711
Left Arm Q3 power supply polarity : enabled
Left Arm B Field Hall Probe (D-G) : 0.3577
-----
Average current of the two cavities : 263.5
Current on Upstream bcm : 380
Current on Downstream bcm : 147
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 380
Raw Downstream Signal : 147
MBSY1c magnet current (amp) : 1.36481e-05
MBSY1c Bdl : 1.82462e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 7290
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.34704
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 9.37619e-06
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0
Wien BDL (First Solenoid) (Gcm) : -978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 21.5998
Wien BDL (Gcm) : 624.54
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 150
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 13056
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 200
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.824
Target Info
-----
Target : Loop 2
fan frequency loop 1 : 0
fan frequency loop 2 : 53.5
fan frequency loop 3 : 0
Encoder position : 2.56168e+07
Target type : 2.56168e+07
temperature loop 1(1) : 205.21
temperature loop 1(2) : 109.49
temperature loop 1(3) : 113.07
Heat exchange loop 1 H2 : 109.54
temperature loop 2(1) : 19.046
temperature loop 2(2) : 18.901
temperature loop 2(3) : 19.036
Heat exchange loop 2 LH2 : 19.021
temperature loop 3(1) : 278.64
temperature loop 3(2) : 280.1
temperature loop 3(3) : 281.28
Heat exchange loop 3 H2 : 280.87
pressure loop H2 before : 25.5161
pressure loop H2 return : 26.6727
pressure loop H2 before : 16.9924
pressure loop H2 return : 16.6262
HPH loop 1 : 4.41999
HPH loop 2 : 136.204
HPH loop 3 : 2.4984
DVCS Calorimeter
Measured HV voltages
15 : -453.1 -459.4 -442.8 -440.9 -437.7 -440.2 -432.5 -477.4 -457.5 -468.9 -457.7 -419.6 -498.4
14 : -504.0 -479.5 -482.3 -468.8 -432.8 -416.5 -447.9 -430.2 -476.6 -422.3 -419.9 -456.9 -439.6
13 : -423.1 -486.1 -443.3 -463.8 -443.4 -460.4 -442.0 -475.3 -485.3 -424.9 -456.6 -450.2 -474.6
12 : -436.8 -447.4 -447.5 -428.1 -445.4 -390.5 -421.8 -404.7 -445.7 -430.3 -412.6 -466.9 -463.0
11 : -459.7 -474.4 -426.1 -471.6 -430.4 -412.5 -459.4 -462.9 -439.0 -469.1 -435.7 -445.0 -444.9
10 : -450.8 -481.1 -469.6 -468.8 -442.9 -431.6 -431.2 -466.7 -400.8 -464.5 -528.0 -476.0 -425.3
09 : -414.8 -438.6 -434.8 -480.3 -458.3 -424.6 -457.3 -449.6 -491.7 -430.3 -415.9 -486.1 -408.2
08 : -460.6 -487.1 -450.3 -433.1 -491.6 -410.4 -470.9 -389.8 -429.2 -426.2 -403.8 -463.8 -435.4
07 : -452.2 -506.1 -473.8 -426.2 -461.1 -413.0 -428.7 -407.9 -421.3 -453.0 -422.7 -411.6 -484.4
06 : -469.9 -471.3 -480.2 -472.5 -458.4 -422.3 -455.9 -464.8 -496.8 -426.5 -417.2 -453.9 -449.4
05 : -476.9 -448.1 -415.3 -473.1 -439.2 -459.7 -397.3 -400.2 -437.6 -430.2 -408.9 -479.2 -435.9
04 : -462.9 -475.6 -480.8 -426.0 -445.7 -514.6 -453.9 -442.0 -420.6 -439.7 -439.0 -436.2 -452.6
03 : -489.5 -435.8 -428.0 -397.6 -428.6 -412.2 -393.6 -414.5 -445.4 -422.5 -432.8 -446.5 -410.0
02 : -455.7 -490.7 -465.2 -425.1 -441.4 -439.7 -422.6 -424.8 -427.7 -461.2 -454.1 -448.4 -468.5
01 : -443.3 -460.8 -505.9 -546.8 -462.1 -430.5 -392.1 -442.6 -407.7 -444.4 -443.1 -434.7 -417.7
00 : -430.0 -458.0 -438.2 -492.0 -465.3 -506.0 -496.6 -493.4 -453.8 -500.7 -460.1 -484.1 -482.0
Measured HV currents
15 : -448.5 -455.4 -440.2 -438.1 -430.4 -431.9 -426.9 -474.5 -454.8 -464.7 -455.2 -414.3 -506.5
14 : -500.6 -476.8 -477.6 -464.2 -428.5 -413.4 -444.0 -429.1 -467.1 -417.4 -415.5 -453.5 -443.0
13 : -419.4 -479.5 -437.8 -458.0 -438.9 -457.0 -436.8 -468.7 -479.7 -422.6 -451.8 -442.0 -480.4
12 : -431.5 -443.8 -442.4 -426.3 -442.9 -383.9 -417.1 -400.3 -440.9 -426.1 -408.8 -462.3 -469.5
11 : -452.5 -470.6 -422.7 -468.2 -425.9 -409.8 -463.3 -456.3 -432.4 -463.9 -431.8 -441.5 -450.2
10 : -446.6 -476.9 -462.8 -463.6 -436.8 -426.1 -433.8 -464.9 -396.4 -460.0 -614.3 -475.2 -428.7
09 : -409.7 -432.1 -432.5 -473.1 -454.9 -418.9 -459.3 -444.2 -486.2 -425.0 -413.7 -479.3 -413.6
08 : -454.1 -485.4 -444.6 -428.6 -487.4 -406.3 -476.5 -385.4 -423.8 -419.3 -401.2 -460.1 -437.0
07 : -448.7 -502.3 -469.5 -419.5 -457.3 -412.8 -430.4 -402.5 -419.8 -450.9 -416.7 -410.3 -489.7
06 : -462.9 -466.1 -478.3 -466.1 -451.9 -417.3 -461.7 -457.6 -491.6 -418.5 -410.8 -448.3 -452.9
05 : -470.0 -444.8 -411.8 -468.9 -436.1 -455.3 -400.4 -398.6 -432.2 -422.7 -403.9 -475.6 -439.7
04 : -455.4 -472.5 -476.1 -422.8 -438.0 -510.8 -458.7 -435.5 -417.3 -436.9 -437.5 -432.7 -457.0
03 : -487.0 -434.2 -421.9 -395.3 -425.2 -408.1 -399.5 -410.0 -441.1 -419.9 -428.5 -441.7 -416.0
02 : -449.9 -484.2 -464.2 -420.9 -434.5 -435.7 -429.1 -416.8 -426.1 -456.6 -447.3 -446.1 -472.1
01 : -440.4 -458.1 -502.3 -543.2 -459.0 -425.2 -396.4 -439.8 -401.6 -440.9 -440.7 -427.4 -424.8
00 : -427.6 -454.3 -433.9 -483.9 -458.8 -498.6 -501.7 -489.8 -449.9 -495.6 -454.4 -478.9 -487.2
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: 1 RC s13.10 mv -0.7
TOP2: 1 RC s13.11 mv -0.6
DVCS Cosmic Padels BOTTOM
BOTTOM1: 1 RC s13.5 mv -1.8
BOTTOM2: 1 RC s13.4 mv -1.3
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : 0.054 -0.004 -0.004 -0.007 -0.021 -0.017 -0.018 -0.018 0.004 -0.013 -0.020 -0.021 -0.011
14 : 0.052 -0.002 -0.001 -0.004 -0.021 -0.011 -0.011 -0.012 -0.012 -0.020 -0.011 -0.022 0.000
13 : 0.052 -0.004 -0.004 0.000 -0.023 -0.018 -0.016 -0.016 -0.013 -0.013 -0.017 -0.013 -0.012
12 : 0.054 -0.004 -0.004 -0.005 -0.023 -0.020 -0.013 -0.009 -0.006 -0.015 -0.009 -0.018 -0.011
11 : -0.294 -0.005 -0.002 -0.001 -0.021 -0.017 -0.012 -0.016 -0.016 -0.013 -0.013 -0.016 -0.013
10 : -0.294 -0.004 -0.004 -0.007 -0.021 -0.013 -0.010 -0.012 -0.012 -0.010 -0.015 -0.018 -0.016
9 : -0.294 -0.004 -0.004 -0.007 -0.023 -0.015 -0.017 -0.016 -0.012 -0.011 -0.015 -0.018 -0.009
8 : -0.295 -0.004 -0.005 -0.002 -0.020 -0.016 -0.017 -0.020 -0.017 -0.015 -0.013 -0.016 -0.013
7 : -0.316 -0.001 -0.004 -0.005 -0.023 -0.016 -0.018 -0.018 -0.009 -0.013 -0.013 -0.016 -0.015
6 : -0.316 -0.002 -0.004 -0.006 -0.026 -0.013 -1.866 -0.021 -0.010 -0.011 -0.012 -0.015 -0.013
5 : -0.316 -0.002 -0.001 -0.001 -0.023 -0.016 -0.011 -0.022 -0.007 -0.011 -0.017 -0.020 -0.013
4 : -0.316 -0.001 -0.005 -0.011 -0.024 -0.015 -0.016 -0.021 -0.007 -0.010 -0.015 -0.017 -0.010
3 : -0.005 -0.004 -0.005 -0.004 -0.026 -0.015 -0.017 -0.015 -0.015 -0.015 -0.015 -0.016 -0.010
2 : -0.006 -0.002 -0.002 -0.006 -0.024 -0.015 -0.020 -0.017 -0.016 -0.010 -0.018 -0.013 -0.010
1 : -0.006 -0.004 -0.005 -0.004 -0.022 -0.017 -0.015 -0.016 -0.015 -0.012 -0.021 -0.018 -0.013
0 : -0.007 -0.002 -0.006 -0.001 -0.029 -0.021 -0.015 -0.016 -0.027 -0.018 -0.023 -0.012 -0.016
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'