NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 10:34:24 on January 29, 2015
Entry number 405360
keyword=End_of_Run_10805
****************************
Run Number: 10805
End of Run Comment:
Run_type=Cosmics,target_type=Home(no target, or empty),comment_text=checking raster signals
PRESCALE FACTORS:ps1=1 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=4 ps9=0 ps10=0 ps11=0 ps12=0
EVENTS : 131479
TIME : 0.492 mins
DEAD TIME: 82.81%
TRIGGER RATES: PRES/REAL
T1:T1: 4.8/4.8 Hz T2:T2: 0.0/2.8 Hz T3:T3: 0.0/6.2 Hz T4:T4: 0.0/0.6 Hz T5:T5: 0.0/3.8 Hz T6:T6: 0.0/1.6 Hz T7:T7: 0.0/6.4 Hz T8:T8:25925.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 142/142 T2:T2: 0/84 T3:T3: 0/183 T4:T4: 0/19 T5:T5: 0/111 T6:T6: 0/46 T7:T7: 0/188 T8:T8: 764895/3059581
AVERAGE CURRENT
BCM 1 : -0.0342uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -1.234
BCM d1 : -0.7852
****************************
End-of-run EPICS data for Run Number 10805 at Thu Jan 29 10:33:58 EST 2015
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 15 at 15:30
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 15 at 15:30
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 7358.35
Beam Current : 57.5
------
Injector Measured Energy : 102.722
Average North Linac Measured Energy : 910.219333333333333
Average South Linac Measured Energy : 911.653333333333333
------
Left arm angle : -0.179
Left arm momentum : 0.00236617
Right arm angle : 0.197
Right arm momentum : 0
------
Fast Raster Ix : 31.5362
Fast Raster Iy : 33.0068
------
Hall A momentum (Tiefenbach) (HALLA:p) : 7358.35
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 0
MBSY1c Bdl : 1.84167e+06
Misc Epics Info
Left Arm Q1 momentum : 0.000319184
Left Arm Q1 power supply : 0
Left Arm Q1 gauss meter : 0.0002806
Left Arm Q2 power supply current : -0.000336942
Left Arm Q2 momentum : -7.12939e-07
Left Arm Q2 gauss meter : 0.0002168
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : 0.04289
Left Arm D1 momentum : 0.00236617
Left Arm D1 NMR : 0.17785
Left Arm Q3 power supply current : -0.000261098
Left Arm Q3 momentum : -6.55828e-07
Left Arm Q3 gauss meter : -0.00020504
Left Arm Q3 power supply polarity : enabled
Left Arm B Field Hall Probe (D-G) : -0.0008625
-----
Average current of the two cavities : 112
Current on Upstream bcm : 103
Current on Downstream bcm : 121
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 89
Raw Downstream Signal : 132
MBSY1c magnet current (amp) : 0
MBSY1c Bdl : 1.84167e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 7358.35
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 7375
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.34704
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 0
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : -93.5148
Wien BDL (First Solenoid) (Gcm) : -1037.9
Wien BDL (Second Solenoid) (Gcm) : -1037.9
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : 1.24999
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 0
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 12800
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
Target Info
-----
Target : Loop 1
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 2.56168e+07
Target type : 2.56168e+07
temperature loop 1(1) : 294.45
temperature loop 1(2) : 294.55
temperature loop 1(3) : 294.24
Heat exchange loop 1 H2 : 293.5
temperature loop 2(1) : 294.01
temperature loop 2(2) : 294.43
temperature loop 2(3) : 294.23
Heat exchange loop 2 LH2 : 293.39
temperature loop 3(1) : 296.08
temperature loop 3(2) : 295.37
temperature loop 3(3) : 296.38
Heat exchange loop 3 H2 : 295.01
pressure loop H2 before : 15.0652
pressure loop H2 return : 15.6893
pressure loop H2 before : 14.8775
pressure loop H2 return : 14.4823
HPH loop 1 : 4.38631
HPH loop 2 : 1.99718
HPH loop 3 : 2.12147
DVCS Calorimeter
Measured HV voltages
15 : 0.9 -0.2 -0.2 0.2 -0.4 -0.8 0.0 -0.9 -0.2 0.1 0.0 -1.4 0.9
14 : 0.2 -0.4 0.4 -0.4 -0.6 -0.1 0.7 -0.6 -1.2 -0.7 -0.0 -1.7 0.9
13 : -0.0 -0.4 0.1 -0.3 -0.6 0.0 0.8 -0.9 -0.5 0.6 -0.6 0.4 0.9
12 : 0.3 0.4 -0.3 0.7 -1.0 -0.7 1.2 -0.7 -1.9 1.1 0.0 0.5 0.4
11 : -1.8 1.4 -1.4 -0.7 0.7 0.1 -0.5 0.4 -0.6 -0.6 0.8 -0.8 -0.0
10 : 0.2 -0.5 0.9 -0.4 -0.6 -0.7 -0.8 -0.1 -0.9 -0.2 0.8 -0.3 0.2
09 : -2.1 0.3 -0.0 -0.6 0.1 -0.3 -1.3 -0.4 -0.8 -0.2 1.0 0.3 -0.3
08 : -2.1 1.7 -0.7 -2.7 0.3 -1.2 -0.2 0.3 -0.6 -0.0 0.3 0.0 -1.5
07 : -0.5 0.0 1.2 -0.9 -1.1 0.1 0.1 -0.7 -0.1 0.2 -0.8 1.3 -0.4
06 : -0.5 -0.2 0.2 -1.0 -0.8 0.6 -0.2 0.1 0.5 -1.0 0.0 -0.2 -1.0
05 : -1.3 -1.4 1.1 -0.8 -0.7 0.4 0.7 -1.4 -0.0 0.0 0.0 -0.4 -0.8
04 : -2.4 -0.4 0.8 -0.3 0.3 0.6 -0.6 -1.4 0.6 0.5 -0.3 0.1 -1.3
03 : -0.3 1.2 -0.2 -0.1 -0.7 -0.4 -0.4 0.3 -0.2 0.7 -0.9 0.6 1.1
02 : -0.3 0.7 -0.3 -0.6 -1.3 -1.4 0.4 -0.3 -0.6 1.2 -0.4 -1.4 -0.3
01 : 1.6 0.5 -0.2 0.2 -1.1 0.0 0.3 -0.1 -0.3 0.2 0.4 -0.4 0.1
00 : 0.8 -0.3 -0.5 0.4 -0.0 -0.8 0.8 0.0 -0.2 -0.7 0.0 -0.7 0.3
Measured HV currents
15 : -0.1 1.0 -1.1 -0.2 -2.1 0.1 3.3 1.7 -1.9 0.5 1.4 -1.6 -1.2
14 : -3.4 -3.9 2.7 3.8 -1.7 1.6 0.2 0.9 4.1 -0.4 2.3 -1.6 -1.4
13 : 3.8 1.8 -2.0 -2.3 -1.1 -1.4 -0.3 -1.2 -0.6 -0.8 -1.9 -0.1 4.2
12 : 0.2 1.2 1.4 -0.8 0.3 0.8 -2.3 1.3 -1.0 1.0 -0.4 1.2 -2.4
11 : 3.5 -1.6 1.7 -2.1 3.8 0.5 2.5 0.9 -3.4 3.7 -3.6 2.7 -0.2
10 : -3.2 1.1 0.1 3.0 -2.0 -1.2 -1.9 -0.3 3.7 -1.7 2.0 -3.6 1.6
09 : -1.2 -0.0 -1.8 -1.8 -1.0 1.0 0.4 -1.2 0.4 1.1 -1.6 0.5 2.4
08 : 0.5 -1.2 -0.2 0.2 2.0 -2.3 0.3 1.1 -1.1 1.7 -1.3 1.2 -1.8
07 : 4.2 -0.5 0.9 1.1 0.9 -1.2 -1.0 3.9 -1.9 1.6 -4.6 4.4 1.0
06 : -2.3 2.4 -0.9 1.3 -2.2 1.7 0.2 -2.2 0.6 -3.6 1.9 -2.5 0.1
05 : -0.6 -1.7 1.8 -4.3 1.4 -2.1 3.0 -0.9 2.0 2.0 1.0 0.0 -1.5
04 : 2.4 0.3 0.8 1.1 -0.3 -0.1 0.5 2.0 0.7 0.6 -2.7 2.3 0.8
03 : 2.0 -0.3 0.5 1.3 2.1 -1.9 -1.2 -1.1 -1.1 -2.0 1.0 1.8 2.3
02 : -0.1 -1.2 -0.8 -1.5 -2.0 0.7 0.0 0.1 0.6 -3.5 -0.2 1.6 -3.6
01 : -0.9 3.5 0.1 0.7 0.7 0.7 2.9 0.7 2.4 1.1 1.6 -4.0 2.1
00 : -1.5 -0.9 -0.0 -0.0 -0.1 2.2 -3.3 -1.6 -2.9 -2.8 -2.4 1.5 -0.5
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: ERROR:Host:hatsv17:2003 no response
TOP2: ERROR:Host:hatsv17:2003 no response
DVCS Cosmic Padels BOTTOM
BOTTOM1: ERROR:Host:hatsv17:2003 no response
BOTTOM2: ERROR:Host:hatsv17:2003 no response
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : -0.004 -0.002 0.004 0.007 -0.052 -0.057 -0.034 -0.037 0.002 -0.043 -0.042 -0.044 -0.048
14 : -0.005 -0.004 0.000 0.004 -0.049 -0.060 -0.033 -0.038 -0.042 -0.040 -0.040 -0.042 -0.050
13 : -0.005 -0.002 0.001 0.005 -0.063 -0.059 -0.032 -0.038 -0.040 -0.040 -0.040 -0.042 -0.051
12 : -0.005 -0.004 0.000 0.005 -0.066 -0.060 -0.033 -0.039 -0.040 -0.042 -0.040 -0.040 -0.052
11 : -0.187 -0.001 0.001 0.002 -0.061 -0.060 -0.034 -0.040 -0.042 -0.043 -0.042 -0.042 -0.054
10 : -0.186 -0.001 -0.010 0.004 -0.055 -0.060 -0.034 -0.038 -0.042 -0.043 -0.040 -0.040 -0.054
9 : -0.192 -0.001 -0.001 0.004 -0.051 -0.057 -0.035 -0.035 -0.040 -0.044 -0.043 -0.040 -0.055
8 : -0.192 0.000 0.001 0.004 -0.054 -0.061 -0.046 -0.042 -0.045 -0.049 -0.045 -0.043 -0.061
7 : -0.189 -0.001 0.001 0.005 -0.057 -0.060 -0.045 -0.043 -0.040 -0.044 -0.043 -0.043 -0.054
6 : -0.190 -0.002 0.000 0.004 -0.054 -0.060 -2.061 -0.043 -0.040 -0.039 -0.040 -0.042 -0.055
5 : -0.189 -0.002 0.000 0.005 -0.052 -0.059 -0.045 -0.042 -0.040 -0.040 -0.043 -0.042 -0.055
4 : -0.190 -0.004 0.001 0.004 -0.054 -0.059 -0.045 -0.042 -0.040 -0.039 -0.040 -0.042 -0.055
3 : -0.005 -0.001 0.000 0.004 -0.050 -0.056 -0.051 -0.042 -0.042 -0.038 -0.043 -0.042 -0.055
2 : -0.005 -0.002 0.000 0.004 -0.048 -0.056 -0.048 -0.040 -0.043 -0.040 -0.042 -0.042 -0.055
1 : -0.005 -0.004 0.000 0.005 -0.045 -0.055 -0.050 -0.038 -0.044 -0.040 -0.043 -0.043 -0.052
0 : -0.005 -0.004 0.001 0.004 -0.056 -0.060 -0.059 -0.048 -0.061 -0.046 -0.048 -0.048 -0.060
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'