NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 13:36:14 on March 2, 2015
Entry number 405436
keyword=End_of_Run_10839
****************************
Run Number: 10839
End of Run Comment:
Run_type=LED,target_type=Home(no target, or empty),comment_text=DVCS LED run
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 26
TIME : 0.224 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/5.0 Hz T2:T2: 0.0/3.2 Hz T3:T3: 0.0/6.0 Hz T4:T4: 0.0/0.7 Hz T5:T5: 0.0/4.3 Hz T6:T6: 0.0/1.0 Hz T7:T7: 0.0/6.1 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/67 T2:T2: 0/43 T3:T3: 0/81 T4:T4: 0/10 T5:T5: 0/58 T6:T6: 0/14 T7:T7: 0/82 T8:T8: 0/1392878
AVERAGE CURRENT
BCM 1 : -0.0342uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -0.5618
BCM d1 : -0.3575
****************************
End-of-run EPICS data for Run Number 10839 at Mon Mar 2 13:35:40 EST 2015
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 2 at 12:30
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 2 at 12:30
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 10375.6
Beam Current : 102
------
Injector Measured Energy : 106.734
Average North Linac Measured Energy : 952.555333333333333
Average South Linac Measured Energy : 948.996666666666667
------
Left arm angle : -0.179
Left arm momentum : 0.00287615
Right arm angle : 0.197
Right arm momentum : 0.147685
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 10375.6
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9607.2
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 2
MBSY1c Bdl : 2.59461e+06
Misc Epics Info
Left Arm Q1 momentum : 0.00468136
Left Arm Q1 power supply : 2.08286
Left Arm Q1 gauss meter : 9.8e-06
Left Arm Q2 power supply current : 0.0226163
Left Arm Q2 momentum : 0.000537057
Left Arm Q2 gauss meter : 0.0002587
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : -2.06287
Left Arm D1 momentum : 0.00287615
Left Arm D1 NMR : 0.346733
Left Arm Q3 power supply current : 0.792578
Left Arm Q3 momentum : 0.00684604
Left Arm Q3 gauss meter : -0.00059165
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.0010411
-----
Average current of the two cavities : 72.5
Current on Upstream bcm : 43
Current on Downstream bcm : 102
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 43
Raw Downstream Signal : 102
MBSY1c magnet current (amp) : 2
MBSY1c Bdl : 2.59461e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 10375.6
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9607.2
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.34004
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 45.4007
Wien Vertical BDL (Gcm) : 1312.9
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 88.1178
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : 0
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 80
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 8960
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
Target Info
-----
Target : Carbon hole
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 1
Target type : 1
temperature loop 1(1) : 294.15
temperature loop 1(2) : 294.28
temperature loop 1(3) : 294.07
Heat exchange loop 1 H2 : 293.63
temperature loop 2(1) : 294.22
temperature loop 2(2) : 294.3
temperature loop 2(3) : 294.26
Heat exchange loop 2 LH2 : 293.32
temperature loop 3(1) : 296.38
temperature loop 3(2) : 295.6
temperature loop 3(3) : 296.59
Heat exchange loop 3 H2 : 295.03
pressure loop H2 before : 42.6062
pressure loop H2 return : 42.7466
pressure loop H2 before : 42.4933
pressure loop H2 return : 42.2125
HPH loop 1 : 4.52704
HPH loop 2 : 2.06075
HPH loop 3 : 2.21985
DVCS Calorimeter
Measured HV voltages
15 : -743.2 -721.8 -691.2 -722.3 -683.5 -711.4 -671.4 -741.2 -750.5 -757.1 -720.6 -647.5 -806.4
14 : -798.2 -779.9 -761.9 -741.0 -677.4 -678.5 -728.8 -700.0 -780.3 -693.4 -689.4 -748.3 -715.3
13 : -662.1 -773.6 -702.0 -743.6 -706.4 -733.1 -691.8 -742.5 -782.7 -663.7 -723.8 -708.2 -744.5
12 : -682.9 -699.1 -704.0 -703.3 -760.7 -622.4 -687.0 -669.8 -729.9 -706.4 -678.2 -759.8 -748.7
11 : -731.1 -750.5 -662.5 -767.6 -682.3 -653.3 -741.1 -731.3 -686.1 -768.4 -681.8 -692.0 -718.0
10 : -708.7 -752.8 -739.2 -756.5 -700.8 -706.4 -706.4 -765.0 -639.4 -761.5 -850.3 -743.6 -691.9
09 : -643.7 -694.0 -687.5 -785.9 -713.0 -689.9 -717.1 -707.5 -806.1 -695.5 -668.6 -764.6 -655.5
08 : -715.0 -756.6 -698.8 -719.5 -773.8 -667.6 -740.2 -622.0 -693.2 -666.7 -649.4 -730.4 -718.6
07 : -725.1 -805.1 -750.2 -687.3 -724.3 -655.2 -662.3 -668.9 -671.7 -712.7 -686.9 -637.1 -795.9
06 : -781.9 -751.7 -750.6 -761.4 -711.8 -687.4 -721.5 -743.7 -793.6 -665.6 -668.7 -709.4 -719.7
05 : -745.1 -719.7 -641.8 -763.9 -689.9 -743.7 -634.9 -641.6 -728.3 -696.2 -660.9 -753.3 -718.2
04 : -727.2 -747.5 -760.7 -698.9 -700.5 -809.8 -709.6 -725.0 -662.2 -683.5 -681.6 -678.4 -702.8
03 : -797.0 -681.0 -660.6 -652.6 -697.0 -665.8 -632.3 -675.9 -748.1 -692.7 -713.6 -737.9 -668.4
02 : -712.0 -766.6 -726.6 -675.7 -693.6 -714.0 -694.1 -663.8 -695.8 -721.5 -737.8 -696.2 -731.4
01 : -686.2 -724.3 -828.8 -850.4 -730.3 -705.2 -634.1 -715.2 -664.2 -740.8 -721.9 -712.9 -674.4
00 : -697.2 -719.9 -718.1 -769.5 -731.1 -794.7 -776.2 -776.8 -728.0 -781.2 -733.3 -776.1 -759.0
Measured HV currents
15 : -739.3 -717.0 -686.2 -715.4 -675.0 -703.0 -665.5 -736.5 -744.3 -750.8 -714.2 -639.8 -815.3
14 : -790.2 -776.6 -754.1 -732.6 -668.4 -671.5 -721.7 -691.0 -768.5 -685.7 -679.9 -740.0 -722.7
13 : -659.3 -765.4 -695.1 -739.4 -700.8 -723.9 -683.5 -735.9 -771.8 -657.2 -716.7 -700.7 -755.2
12 : -676.6 -695.4 -697.8 -697.2 -751.4 -616.4 -680.7 -663.7 -720.7 -701.9 -671.1 -750.7 -755.9
11 : -720.2 -743.4 -653.7 -761.8 -677.2 -647.4 -745.5 -723.0 -681.0 -757.7 -675.6 -685.4 -723.4
10 : -703.5 -743.6 -730.0 -747.9 -694.5 -700.2 -712.6 -759.3 -630.5 -753.0 -990.4 -737.8 -700.0
09 : -636.9 -689.1 -683.9 -777.3 -703.9 -680.6 -721.9 -702.1 -798.4 -689.7 -664.0 -757.6 -662.4
08 : -704.9 -748.9 -690.5 -708.7 -769.5 -661.2 -746.6 -613.7 -685.0 -657.3 -643.7 -723.9 -726.4
07 : -718.9 -797.6 -742.8 -678.8 -715.4 -652.7 -666.6 -660.9 -663.8 -706.2 -676.9 -630.5 -806.9
06 : -775.8 -744.1 -743.8 -751.8 -704.3 -682.1 -731.2 -735.3 -788.0 -657.4 -662.6 -702.9 -724.6
05 : -738.3 -714.7 -638.8 -757.8 -684.0 -739.2 -641.0 -638.5 -722.4 -688.7 -653.6 -744.8 -727.0
04 : -717.1 -742.3 -754.7 -692.6 -691.6 -802.8 -718.8 -717.8 -653.5 -678.2 -673.4 -674.1 -710.6
03 : -786.3 -675.9 -657.0 -645.2 -690.7 -658.4 -642.6 -669.0 -742.2 -686.3 -705.4 -729.9 -679.9
02 : -706.9 -762.9 -723.3 -668.3 -686.7 -708.4 -703.5 -654.7 -688.1 -715.2 -732.6 -689.5 -735.0
01 : -680.3 -713.4 -826.5 -846.0 -721.2 -697.9 -638.4 -709.3 -657.5 -732.1 -715.9 -704.9 -682.5
00 : -690.3 -711.8 -709.9 -760.3 -725.2 -788.7 -786.1 -766.6 -719.7 -777.5 -725.3 -769.0 -769.0
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: 1 RC s13.10 mv -599.7
TOP2: 1 RC s13.11 mv -600.4
DVCS Cosmic Padels BOTTOM
BOTTOM1: 1 RC s13.5 mv -601.8
BOTTOM2: 1 RC s13.4 mv -601.3
-------------------------------------------------------------------
Measured anode currents: block number
iochacs (129.57.242.13) needs to be reboot
Please see DVCS HOW-TO wiki for reboot IOC
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'