NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 10:44:42 on March 3, 2015
Entry number 405465
keyword=End_of_Run_10855
****************************
Run Number: 10855
End of Run Comment:
Run_type=LED,target_type=Home(no target, or empty),comment_text=LED run - low rate - block 14 - HV on
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 246080
TIME : 0.017 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/178974.0 Hz T2:T2: 0.0/105022.0 Hz T3:T3: 0.0/211609.0 Hz T4:T4: 0.0/17595.0 Hz T5:T5: 0.0/119787.0 Hz T6:T6: 0.0/37971.0 Hz T7:T7: 0.0/210118.0 Hz T8:T8: 0.0/-719562960.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/178974 T2:T2: 0/105022 T3:T3: 0/211609 T4:T4: 0/17595 T5:T5: 0/119787 T6:T6: 0/37971 T7:T7: 0/210118 T8:T8: 0/-719562958
AVERAGE CURRENT
BCM 1 : -0.0000uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -4.033E-07
BCM d1 : -2.567E-07
****************************
End-of-run EPICS data for Run Number 10855 at Tue Mar 3 10:44:04 EST 2015
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 2 at 12:30
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 2 at 12:30
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 10375.6
Beam Current : 80.5
------
Injector Measured Energy : 104.96
Average North Linac Measured Energy : 952.293333333333333
Average South Linac Measured Energy : 949.85
------
Left arm angle : -0.179
Left arm momentum : 0.150154
Right arm angle : 0.197
Right arm momentum : 0.147739
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 10375.6
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9607.2
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 2
MBSY1c Bdl : 2.59461e+06
Misc Epics Info
Left Arm Q1 momentum : 0.130224
Left Arm Q1 power supply : 99.2828
Left Arm Q1 gauss meter : -0.008014
Left Arm Q2 power supply current : 0.0204112
Left Arm Q2 momentum : 0.000363756
Left Arm Q2 gauss meter : 0.0002271
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 47.9304
Left Arm D1 momentum : 0.150154
Left Arm D1 NMR : 0.333539
Left Arm Q3 power supply current : 100.644
Left Arm Q3 momentum : 0.258151
Left Arm Q3 gauss meter : -0.05084
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.05391
-----
Average current of the two cavities : 138
Current on Upstream bcm : 154
Current on Downstream bcm : 108
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 119
Raw Downstream Signal : 108
MBSY1c magnet current (amp) : 2
MBSY1c Bdl : 2.59461e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 10375.6
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9607.2
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.34004
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 45.4007
Wien Vertical BDL (Gcm) : 1312.9
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 88.1178
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : 0
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 90
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 8960
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
Target Info
-----
Target : Carbon hole
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 1
Target type : 1
temperature loop 1(1) : 294.33
temperature loop 1(2) : 294.34
temperature loop 1(3) : 294.14
Heat exchange loop 1 H2 : 293.59
temperature loop 2(1) : 294.36
temperature loop 2(2) : 294.31
temperature loop 2(3) : 294.24
Heat exchange loop 2 LH2 : 293.32
temperature loop 3(1) : 296.45
temperature loop 3(2) : 295.62
temperature loop 3(3) : 296.57
Heat exchange loop 3 H2 : 295
pressure loop H2 before : 42.0446
pressure loop H2 return : 42.214
pressure loop H2 before : 42.3376
pressure loop H2 return : 42.0446
HPH loop 1 : 4.51917
HPH loop 2 : 2.14295
HPH loop 3 : 2.23677
DVCS Calorimeter
Measured HV voltages
15 : -743.2 -721.8 -691.2 -722.3 -683.5 -710.6 -671.4 -740.4 -750.5 -757.1 -720.6 -647.5 -806.4
14 : -799.0 -779.9 -762.7 -741.0 -677.4 -678.5 -728.8 -700.0 -780.3 -693.4 -688.6 -747.6 -716.1
13 : -662.1 -773.6 -702.0 -743.6 -706.4 -733.1 -691.8 -742.5 -782.7 -663.7 -723.0 -708.2 -744.5
12 : -682.9 -699.1 -704.0 -703.3 -760.7 -621.7 -687.8 -670.5 -729.9 -706.4 -678.2 -759.1 -748.7
11 : -731.1 -750.5 -662.5 -767.6 -682.3 -653.3 -741.1 -732.0 -686.1 -768.4 -681.0 -692.0 -718.8
10 : -708.7 -752.8 -739.2 -756.5 -700.8 -705.6 -706.4 -765.0 -640.1 -761.5 -849.6 -743.6 -691.9
09 : -643.7 -694.8 -687.5 -785.9 -713.0 -689.9 -717.1 -708.2 -806.1 -695.5 -667.8 -764.6 -655.5
08 : -715.0 -756.6 -698.0 -719.5 -773.8 -667.6 -740.2 -622.0 -693.2 -666.7 -649.4 -730.4 -718.6
07 : -725.1 -805.9 -750.2 -687.3 -724.3 -654.4 -662.3 -668.9 -671.7 -711.9 -686.9 -637.1 -796.6
06 : -781.9 -751.7 -751.4 -761.4 -711.8 -687.4 -721.5 -744.5 -793.6 -666.4 -668.7 -709.4 -719.7
05 : -745.1 -718.9 -641.8 -763.1 -689.9 -743.7 -634.9 -641.6 -728.3 -696.2 -660.9 -753.3 -718.2
04 : -726.4 -747.5 -761.4 -698.9 -700.5 -809.0 -709.6 -725.8 -662.2 -683.5 -681.6 -678.4 -702.8
03 : -796.2 -681.0 -660.6 -651.9 -697.0 -665.8 -632.3 -675.2 -748.1 -692.7 -712.8 -737.9 -668.4
02 : -712.8 -766.6 -726.6 -676.5 -693.6 -714.0 -694.1 -663.8 -695.8 -721.5 -737.8 -696.2 -732.2
01 : -686.2 -724.3 -828.8 -850.4 -730.3 -705.2 -634.1 -715.2 -664.2 -740.8 -721.2 -713.7 -674.4
00 : -697.2 -719.9 -718.1 -769.5 -731.1 -794.7 -776.2 -776.8 -728.0 -781.2 -732.5 -775.3 -758.3
Measured HV currents
15 : -739.3 -714.3 -686.8 -718.7 -673.7 -702.4 -666.9 -732.5 -741.6 -749.5 -713.6 -640.5 -814.6
14 : -789.5 -774.6 -752.1 -733.2 -669.7 -668.9 -721.7 -691.0 -769.8 -686.4 -683.9 -739.3 -726.8
13 : -658.6 -768.1 -697.8 -736.1 -699.4 -727.9 -684.8 -734.6 -773.2 -658.5 -712.7 -702.7 -751.1
12 : -676.0 -692.7 -697.1 -699.8 -756.0 -613.7 -682.0 -663.7 -723.4 -699.2 -673.1 -749.3 -759.3
11 : -720.9 -745.4 -656.4 -758.5 -675.8 -647.4 -748.2 -729.1 -677.7 -757.7 -674.3 -684.7 -726.1
10 : -702.8 -746.3 -729.4 -747.9 -693.9 -699.6 -710.6 -758.0 -631.1 -755.0 -989.7 -735.8 -697.9
09 : -638.9 -687.1 -683.2 -779.3 -703.9 -680.6 -726.0 -700.1 -799.1 -688.4 -663.3 -759.0 -663.1
08 : -706.9 -748.9 -692.5 -712.7 -770.8 -659.2 -750.0 -615.1 -683.7 -660.0 -643.1 -723.9 -727.1
07 : -715.6 -798.9 -745.4 -676.8 -718.1 -652.7 -668.0 -658.9 -665.1 -702.9 -680.2 -631.2 -802.2
06 : -775.2 -741.4 -747.1 -752.4 -702.3 -684.1 -729.1 -739.3 -786.7 -660.1 -661.9 -700.3 -728.6
05 : -736.9 -716.1 -637.5 -757.1 -682.7 -736.5 -639.6 -636.5 -719.1 -688.7 -654.3 -748.1 -726.3
04 : -717.8 -741.6 -754.0 -690.6 -690.9 -802.2 -716.1 -716.4 -659.5 -674.9 -672.7 -672.7 -708.5
03 : -791.6 -675.2 -656.4 -645.8 -691.4 -659.7 -642.6 -669.7 -742.2 -687.6 -706.7 -730.6 -675.1
02 : -704.9 -759.5 -721.3 -670.3 -684.1 -709.7 -700.1 -655.4 -686.1 -715.2 -730.6 -689.5 -743.2
01 : -678.3 -722.7 -827.2 -843.3 -723.2 -695.9 -639.7 -707.3 -657.5 -733.5 -713.9 -705.6 -682.5
00 : -693.0 -711.8 -710.5 -762.9 -724.6 -790.0 -782.7 -768.0 -723.0 -776.2 -727.3 -768.3 -767.0
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: 1 RC s13.10 mv -599.7
TOP2: 1 RC s13.11 mv -599.7
DVCS Cosmic Padels BOTTOM
BOTTOM1: 1 RC s13.5 mv -601.8
BOTTOM2: 1 RC s13.4 mv -601.3
-------------------------------------------------------------------
Measured anode currents: block number
iochacs (129.57.242.13) needs to be reboot
Please see DVCS HOW-TO wiki for reboot IOC
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'