• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name adaq

    Log entry time 06:30:21 on March 9, 2015

    Entry number 405732

    keyword=End_of_Run_10947
    ****************************
     Run Number: 10947
     End of Run Comment:
    Run_type=Spot++,target_type=Carbon,comment_text=raster off  T3 & clock (scaler 4) trigger (optics target) BPMA(2,0) BPMB(2,2)
     
    
    PRESCALE FACTORS:ps1=0   ps2=0   ps3=0   ps4=0   ps5=0   ps6=0   ps7=0   ps8=0   ps9=1   ps10=0   ps11=0   ps12=0   
    
    EVENTS   : 48250        
    
    TIME     : 2.260 mins  
    
    DEAD TIME:   0.00%      
    
    TRIGGER RATES:   PRES/REAL
    T1:T1: 0.0/2522.5 Hz   T2:T2: 0.0/70.9 Hz   T3:T3: 0.0/75.8 Hz   T4:T4: 0.0/2936.2 Hz   T5:T5: 0.0/4011.9 Hz   T6:T6: 0.0/10097.3 Hz   T7:T7: 0.0/6.2  Hz   T8:T8: 0.0/103700.0 Hz   
    
    TRIGGER TOTALS:   PRES/REAL
    T1:T1:      0/342058   T2:T2:      0/9615     T3:T3:      0/10274    T4:T4:      0/398165   T5:T5:      0/544025   T6:T6:      0/1369236  T7:T7:      0/834      T8:T8:      0/14062114  
    
    AVERAGE CURRENT
    BCM 1 : -0.0342uA  
    
    APPROXIMATE BCM CHARGES (C)
    BCM u1 : -5.671         
    BCM d1 : -3.609         
    
    
    ****************************
    End-of-run EPICS data for Run Number 10947 at Mon Mar 9 06:29:49 EDT 2015
    
    

    Right and Left MLU settings

    Left MLU settings 0 0xffff time of Left HRS MLU last setting 2 at 12:30 Right MLU settings 0 0xffff time of Right HRS MLU last setting 2 at 12:30 The meaning of the settings is documented elsewhere; briefly: first number is 0 or 1 0 = standard GMp trigger 1 = single detector trigger second number is a bit mask bit=1 means output is enabled bit=0 means output is disabled only last 8 bits are relevant for NIM output

    General Run Info

    Beam energy (MeV) : 9574.41 Beam Current : 115.5 ------ Injector Measured Energy : 104.882 Average North Linac Measured Energy : 952.302666666666667 Average South Linac Measured Energy : 949.963333333333333 ------ Left arm angle : 23.0054 Left arm momentum : 1.00001 Right arm angle : 52.8814 Right arm momentum : 1.00002 ------ Fast Raster Ix : 0 Fast Raster Iy : 0 ------ Hall A momentum (Tiefenbach) (HALLA:p) : 9574.41 Hall A momentum orbit correction (dpp) : 0 Hall A setup momentum (MMSHLAE) : 9607.2 Hall A energy (halla_MeV) : 0 ------ MBSY1c magnet current (amp) : 414.555 MBSY1c Bdl : 2.39467e+06

    Misc Epics Info

    Left Arm Q1 momentum : 1.00008 Left Arm Q1 power supply : 752.392 Left Arm Q1 gauss meter : -0.06246 Left Arm Q2 power supply current : 430.602 Left Arm Q2 momentum : 1.00001 Left Arm Q2 gauss meter : 0.22682 Left Arm Q2 power supply polarity : disabled Left Arm D1 power supply current : 331.825 Left Arm D1 momentum : 1.00001 Left Arm D1 NMR : 0.370235 Left Arm Q3 power supply current : 398.15 Left Arm Q3 momentum : 1.00008 Left Arm Q3 gauss meter : -0.200827 Left Arm Q3 power supply polarity : disabled Left Arm B Field Hall Probe (D-G) : -0.357 ----- Average current of the two cavities : 41 Current on Upstream bcm : 72 Current on Downstream bcm : 10 Upstream Cavity Coefficient : 1 Downstream Cavity Coefficient : 1 Upstream Pedestal : 0 Downstream Pedestal : 0 Raw Upstream Signal : 81 Raw Downstream Signal : 98 MBSY1c magnet current (amp) : 414.555 MBSY1c Bdl : 2.39467e+06 Hall A momentum (Tiefenbach) (HALLA:p) : 9574.41 Hall A momentum orbit correction (dpp) : 0 Hall A setup momentum (MMSHLAE) : 9607.2 Hall A energy (halla_MeV) : 0 Delta(E)/E width (MV_AI_DXWID) : 2.53156 IPM1C12.XPOS : 0 IPM1H04A.XPOS : 0 IPM1H04A.YPOS : 0 IPM1H04D.XPOS : 0 IPM1H04D.YPOS : 0 ----- Wien angle (Vertical) : 45.4007 Wien Vertical BDL (Gcm) : 1312.9 Wien HV Polarity : POSITIVE Wien electrode Voltage : 0 Wien angle (Solenoids) : 88.1178 Wien BDL (First Solenoid) (Gcm) : 978 Wien BDL (Second Solenoid) (Gcm) : 978 Wien angle (Horizontal) : 0 Wien BDL (Gcm) : 0 Wien HV Polarity (Horizontal) : POSITIVE Wien electrode Voltage (Horizontal) : 0 Laser attenuation Hall A : 50 Laser power Hall A : 0 Rotating waveplate : 0 Fake Half-Wave Plate (8960=OUT) : 8960 Beam Half-wave plate (off=out) : OUT ----- Helicity Delay Set : No Delay Helicity Pattern Set : Quartet Helicity Clock Set : Free Clock Helicity Settle Read : 500 Helicity Stable Read : 33330 Helicity Delay Read : No Delay Helicity Pattern : Quartet Helicity Clock Read : Free Clock Helicity Frequency : 29.5596

    Target Info

    ----- Target : Optics fan frequency loop 1 : 0 fan frequency loop 2 : 0 fan frequency loop 3 : 0 Encoder position : 1.15262e+07 Target type : 1.15262e+07 temperature loop 1(1) : 294.36 temperature loop 1(2) : 294.59 temperature loop 1(3) : 294.41 Heat exchange loop 1 H2 : 293.8 temperature loop 2(1) : 294.31 temperature loop 2(2) : 294.56 temperature loop 2(3) : 294.45 Heat exchange loop 2 LH2 : 293.45 temperature loop 3(1) : 296.39 temperature loop 3(2) : 295.67 temperature loop 3(3) : 296.59 Heat exchange loop 3 H2 : 295.13 pressure loop H2 before : 40.2044 pressure loop H2 return : 40.6134 pressure loop H2 before : 42.4566 pressure loop H2 return : 42.0843 HPH loop 1 : 4.44859 HPH loop 2 : 2.15356 HPH loop 3 : 2.29748

    DVCS Calorimeter

    Measured HV voltages 15 : 0.9 -0.2 -0.2 0.2 -0.4 -0.8 0.0 -0.9 -0.9 0.1 0.0 -0.6 0.9 14 : 0.2 -0.4 0.4 -0.4 -0.6 -0.8 0.7 -0.6 -1.2 -0.7 -0.0 -1.7 0.9 13 : -0.0 -0.4 0.1 -0.3 -0.6 0.0 0.8 -0.9 -0.5 0.6 -0.6 0.4 0.9 12 : 0.3 0.4 -0.3 0.0 -1.0 -0.7 1.2 -0.7 -1.9 0.3 0.0 0.5 0.4 11 : -1.8 1.4 -0.6 -0.7 0.7 0.1 -0.5 -0.3 -0.6 -0.6 0.8 -0.8 -0.0 10 : 0.2 -0.5 0.9 -0.4 -0.6 -0.7 -0.8 -0.1 -0.9 -0.2 0.8 -0.3 0.2 09 : -2.1 0.3 -0.0 -0.6 0.1 -0.3 -1.3 0.3 -0.8 -0.2 1.0 0.3 -0.3 08 : -2.1 1.7 -0.7 -1.9 0.3 -1.2 0.4 0.3 -0.6 -0.0 0.3 0.0 -1.5 07 : -1.2 0.0 1.2 -0.1 -1.1 0.1 0.1 -0.7 0.5 0.2 -0.8 1.3 -0.4 06 : -0.5 -0.2 0.2 -1.0 -0.8 0.6 -0.2 -0.6 0.5 -1.0 0.0 -0.2 -1.0 05 : -1.3 -1.4 1.1 -0.8 -0.7 0.4 0.7 -1.4 -0.0 0.0 0.0 0.2 -0.8 04 : -2.4 -0.4 0.8 -0.3 -0.4 0.6 -0.6 -0.6 0.6 -0.1 -0.3 0.1 -1.3 03 : -0.3 1.2 -0.2 -0.1 -0.7 -0.4 -0.4 0.3 -0.2 -0.0 -0.9 0.6 1.1 02 : -0.3 0.7 -0.3 -0.6 -1.3 -1.4 0.4 -0.3 -0.6 1.2 -0.4 -1.4 -0.3 01 : 1.6 0.5 -0.2 1.0 -1.1 0.0 0.3 -0.1 -0.3 0.2 0.4 -0.4 0.1 00 : 0.8 -0.3 -0.5 0.4 -0.0 -0.8 0.8 0.0 -0.2 -0.7 0.0 -0.7 0.3 Measured HV currents 15 : -1.4 -0.3 0.2 1.0 -2.1 -1.1 -0.6 -0.9 0.0 -2.8 -0.5 1.0 -2.6 14 : 1.2 -0.5 -0.5 1.1 -0.4 1.0 0.9 0.2 2.1 1.5 -1.6 -0.3 2.6 13 : -1.4 1.1 1.9 -0.9 1.5 -0.7 0.3 -0.5 -0.6 0.4 2.0 -0.1 -0.5 12 : 0.2 0.5 -1.2 1.1 -1.0 -0.4 -1.0 -2.6 -0.4 -1.6 0.2 0.6 -1.7 11 : 0.8 -0.3 1.0 -1.4 -1.4 0.5 1.1 2.2 -0.1 1.1 -0.2 1.3 1.7 10 : 0.0 1.1 0.1 1.0 -1.3 0.1 -1.9 -0.3 -0.9 -0.4 0.0 -0.9 -1.7 09 : -0.5 2.6 1.5 -1.8 1.6 -1.6 -0.2 -1.9 1.1 -1.5 -1.6 1.2 1.1 08 : 1.2 -1.9 -1.5 0.9 -1.2 1.6 2.3 1.7 0.8 3.7 0.6 -1.3 -1.1 07 : -1.1 0.7 0.3 -0.9 -1.6 -1.2 3.0 1.3 0.6 -0.3 -2.0 0.4 1.0 06 : 0.3 1.8 -0.3 1.3 -0.2 0.3 -1.8 0.4 -2.6 -0.9 3.3 0.1 -0.5 05 : 0.0 0.9 -0.2 -1.6 -1.2 -1.4 -0.4 -1.5 2.7 1.4 -1.5 1.3 -0.8 04 : -0.2 -0.3 0.8 0.4 1.6 1.1 -0.7 2.0 0.0 -1.3 1.9 -0.9 0.8 03 : 1.3 0.3 0.5 0.0 -1.1 0.7 2.8 -1.1 -1.1 -0.0 -1.5 1.2 2.3 02 : 1.1 0.1 1.1 -0.8 -0.0 -0.5 -0.6 0.8 1.2 0.4 1.0 -1.0 -1.6 01 : 0.3 0.9 -1.2 0.7 0.1 -0.6 -1.1 -1.2 -0.2 1.8 0.3 2.0 1.4 00 : -0.8 0.3 1.2 1.3 -0.1 2.9 1.4 1.0 1.7 -0.7 -0.4 -1.1 0.1 Measured HV for DVCS Cosmic paddels ------------------------------------------------------------------- DVCS Cosmic Padels TOP TOP1: Error open connection(PID:0) : err-3 : errno=22 TOP2: Error open connection(PID:0) : err-3 : errno=22 DVCS Cosmic Padels BOTTOM BOTTOM1: Error open connection(PID:0) : err-3 : errno=22 BOTTOM2: Error open connection(PID:0) : err-3 : errno=22 ------------------------------------------------------------------- Measured anode currents: block number DVCS IOCHACS is LIVE !! 15 : 0.059 -0.001 0.002 -0.002 -0.027 -0.027 -0.034 -0.033 -0.007 -0.012 -0.016 -0.017 -0.002 14 : 0.059 -0.001 0.002 0.001 -0.026 -0.021 -0.028 -0.027 -0.005 -0.015 -0.011 -0.018 0.006 13 : 0.059 -0.001 0.001 0.005 -0.029 -0.031 -0.040 -0.031 -0.004 -0.010 -0.017 -0.013 -0.006 12 : 0.059 0.000 0.000 -0.001 -0.028 -0.031 -0.039 -0.024 -0.001 -0.015 -0.012 -0.016 -0.004 11 : -0.210 -0.002 0.000 0.002 -0.023 -0.023 -0.028 -0.029 -0.010 -0.016 -0.023 -0.015 -0.010 10 : -0.210 -0.002 -0.001 -0.002 -0.024 -0.021 -0.027 -0.026 -0.002 -0.013 -0.022 -0.020 -0.010 9 : -0.210 -0.002 0.000 -0.005 -0.026 -0.021 -0.031 -0.028 -0.001 -0.011 -0.017 -0.022 -0.002 8 : -0.210 -0.002 -0.001 0.000 -0.024 -0.021 -0.029 -0.032 -0.002 -0.013 -0.020 -0.018 -0.005 7 : -0.232 0.002 0.000 -0.002 -0.024 -0.023 -0.024 -0.027 -0.002 -0.017 -0.021 -0.018 -0.009 6 : -0.233 0.002 0.000 -0.002 -0.026 -0.023 -2.120 -0.028 0.001 -0.018 -0.017 -0.016 -0.007 5 : -0.232 0.002 0.006 0.000 -0.024 -0.023 -0.021 -0.033 0.004 -0.017 -0.013 -0.015 -0.010 4 : -0.233 0.002 -0.001 -0.006 -0.023 -0.022 -0.027 -0.032 0.002 -0.017 -0.013 -0.012 -0.005 3 : 0.002 0.000 -0.001 0.000 -0.023 -0.022 -0.021 -0.028 -0.010 -0.024 -0.021 -0.016 -0.005 2 : 0.002 0.001 0.002 -0.001 -0.022 -0.022 -0.024 -0.033 -0.023 -0.027 -0.021 -0.011 -0.006 1 : 0.002 0.001 -0.001 -0.001 -0.021 -0.023 -0.021 -0.027 -0.020 -0.034 -0.013 -0.007 -0.009 0 : 0.002 0.001 -0.001 0.001 -0.028 -0.024 -0.021 -0.026 -0.032 -0.031 -0.018 -0.006 -0.011

    LHRS Detector High Voltage and Current

    S0 A B HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' S2m 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Cherenkov 1 2 3 4 5 6 7 8 9 10 HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' PRL1 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' PRL2 18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' VDC 1 2 HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Straw Chamber 1 2 3 4 5 6 HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'